 |
Auto Exposure Handle
Module
|
| Now you can
also control the exposure of each Head with it's own Auto Module.
This new design is really the same as our time proven Classic 3
inch cube (007S) and can control up to 2400ws. We have repackaged
the HAHM Auto Handle Module into a more modern and convenient shape
for the Signature Series and the new Next Generation Series.
There are seven Manual Settings and seven Auto Settings all of which can be trimmed in between settings for exact exposures. Manual power above 200ws is controlled by the Power Pack. Automatic Power is controlled by the HAHM up to 2400ws. Use Head Cables to connect to both the Pack and the Head. The short cable with a female connecter coming out of the HAHM is long enough to connect directly to any Signature Head. You can use Head Cables to mount the Head away from the Auto sensor and control panel. This is handy in order to use light modifiers or go off camera while the sensor and controls stay near the camera. 1/4-20 Threaded Mounts are available on top and bottom for various mounting techniques. This module will also work with the Classic Heads although you may want the existing built in Cable modified to have an extra set of Head connectors near the Flash Head to insert the HAHM between. If you own a Modular Classic Head, custom cables are available to use this or you may have your A and P Cables modified. Next Generation Heads (HERN & HQRN) are available with Pig Tail jacks that work well with the HAHM. |
Lumedyne
12/3/07 Prices and specifications subject to change without notice