 |
4302 Nikon iTTL Adapter w/ Nikonos connector
Product
# 4302
For non-Ikelite housings with TTL hotshoe & Nikonos-style
bulkhead |
- Same iTTL conversion circuitry proven effective
in Ikelite housings for Nikon dSLR cameras (1)
- TTL exposure for current Ikelite DS Substrobes
when used with non-Ikelite housings
- Convenient switch allows for toggling between TTL and manual
exposure
- Reliable Ikelite bulkhead connection at strobe end for attachment
of single or dual sync cord (2) cord not included
- Compatible with many brands of underwater camera housings.
Adapter is not intended for use with Ikelite housings.
- Delrin
Nikonos-style connector on #4302 adapter prevents corrosion
or seizing
|
- Nikon D-40, D-50, D-70, D-70S, D-80, D-200, D300 or Fuji S5
Pro digital SLR camera and non-Ikelite housing
- 5-conductor
TTL hotshoe and Ikelite- or Nikonos-style bulkhead in housing
(3)
- Current model Ikelite "DS" Substrobe(s). See
strobe circuitry requirements by serial
number. Adapter is
NOT compatible with non-Ikelite strobes.
- Ikelite #4103.51 or #4103.52 digital TTL sync cord for
connection of Adapter to Ikelite Substrobe(s)
|
(1) Exposure compensation is not provided through the
adapter, but can be accessed via the camera's built-in menus
(2) Dual strobe use requires dual sync cord. Two strobes cannot be
operated by independent adapters.
(3) Refer to housing specifications or contact manufacturer for connector
style and wiring information
Ikelite
Housing | Ikelite Strobes
| Ikelite Accessories
4/1/08 Prices
and specifications subject to change without notice
