- The #6147 housing for the Canon G7 includes special conversion
circuitry to utilize the Canon eTTL system with any current
model DS SubStrobe, providing total compatibility as the DS
SubStrobes emulate a proper Canon strobe. See strobe requirements
by serial number.
- The housing includes a diffuser to allow photos to be taken
with the built-in strobe of the camera.
- The Release Handle and Tray included allow easy attachment
and removal of optional SubStrobe mounting arms at the touch
of a button.
- Housing measures 7" wide (10" wide with the removable
handle bar attached), 6" high, and 6" deep. It is
molded of corrosion free clear polycarbonate and operates to
200 feet (60m).
- Every camera function except the self timer and continuous
button is accessible in this very sophisticated housing installation.
Complete housing and camera weighs less than 6 pounds.
- Optional Inon UWL-100, Epoque, and the #6420 Ikelite wide
angle lenses attach directly to the port, but extreme lens
length precludes any advantage.
- An optional #6441.41 UR Pro removable color correcting filter
for use without flash is available.
- The Ikelite DS-51 SubStrobe offers the best of everything
from its compact size to providing eTTL or six manual powers
by rotating a single knob on the strobe.
- The Ikelite DS-125 SubStrobe provides TTL and choice of full,
1/2, 1/4, & 1/8th manual powers.
- An optional #4100.6 EV Manual Controller providing 10 power
settings with any current DS SubStrobe can be attached with
sync cord or triggered by the camera strobe. Its use precludes
use of the TTL conversion circuitry.
- Non-Ikelite strobes can be used operating as manual strobes,
but not with the EV Manual Controller. They will require a
special sync cord.
|
