Azden PRO Series Transmitter (WM/T-PRO)
$ 144.00
Azden PRO Series Transmitter (WM/T-PRO)
Handheld microphone/transmitter
Azden Rechargeable Battery (1HR-3U)
$ 12.00
Azden Rechargeable Battery (1HR-3U)
AA NIMH Rechargeable battery for the IRN-10, IRH-15C and 320UPR (each)
Azden Replacement Battery (DW-10B)
$ 49.00
Azden Replacement Battery (DW-10B)
replacement battery for DW-10T
Azden SGM-1X Professional Shotgun Microphone
$ 178.95
The SGM-1X Professional Shotgun Microphone is designed to provide quality audio for the videographer. It is ideal for today's smaller, digital video cameras where longer models would appear in the frame when camera mounted. The hyper-directional super-cardioid shotgun microphone has a wide frequency response, exhibits low noise and accepts up to 110dB SPL input levels. The 11.8" long microphone uses a single AAA battery that will last over 1000 hours due to the mic's extremely low current drain.
Azden SGM-990 Supercardioid / omni shotgun mic w/ 2-position switch - New
$ 85.95
Azden SGM-990 Supercardioid / omni shotgun mic w/ 2-position switch - New
The SGM-990 features a 2-position switch to select between directional pickup patterns to focus on your sound source. Choose between "Long" for supercardioid or "Short" for a cardioid pickup pattern, depending on the distance from your subject. Both settings will provide rejection of unwanted sound from the sides and the back. The SGM-990's working range is 20 to 40 feet and it has a frequency response of 150 Hz to 18 kHz. It is built with a coiled cable which has a 1/8" (3.5mm) mini-jack connector, and uses one alkaline AAA battery for power. A windscreen and shoe mount are included.
Azden Shotgun Microphone (SGM-250)
$ 249.00
Azden Shotgun Microphone (SGM-250)
NEW Broadcast quality dual power shotgun microphone with LED status indicator. New precision cut all metal barrel for superior side and rear noise rejection. New ultra high quality microphone element can be powered with external (12-48VDC) phantom power or 1 AA battery. Supplied with shock mount holder, foam windshield and zippered carrying case.
Azden Shotgun Microphone (SGM-250P)
$ 229.00
Azden Shotgun Microphone (SGM-250P)
NEW Broadcast quality phantom power shotgun microphone. New precision cut all metal barrel for superior side and rear noise rejection. New ultra high quality microphone element can be powered by any (12-48VDC) external phantom power source. Supplied with shock mount holder, foam windshield and zippered carrying case.
Azden Shotgun Microphone (SGM-990 + i)
$ 95.00
Azden Shotgun Microphone (SGM-990 + i)
Same as SGM-990 but includes mobile device interface cable. Compatible with Smart Phones and Tablets, DSLR and Video Cameras
Azden Shotgun Microphone (SGM-990)
$ 85.00
Azden Shotgun Microphone (SGM-990)
New design for DSLR - Supercardioid/omni shotgun mic w/2-position switch
Azden Shotgun Microphone (SGM-PDII)
$ 179.00
Azden Shotgun Microphone (SGM-PDII)
Professional mini (150 mm) shotgun microphone with hard wired 3-pin XLR output cable. Works perfectly with broadcast and prosumer cameras that supply (12-48VDC) phantom power. Includes shock mount holder with shoe and flocked foam windscreen.
Azden Shotgun Microphone (SGM-PII)
$ 149.00
Azden Shotgun Microphone (SGM-PII)
Professional (207 mm) shotgun microphone with balanced XLR mic output. Works perfectly with broadcast and prosumer cameras that supply (12-48VDC) phantom power. Includes shock mount holder with shoe and flocked foam windscreen.
Azden Shotgun Microphone (SMX-15)
$ 199.00
Azden Shotgun Microphone (SMX-15)
Shotgun only version of the SMX-30 with the same great features.
Azden Speaker (each) Ceiling Mount (ACS-6.5)
$ 44.00
Azden Speaker (each) Ceiling Mount (ACS-6.5)
6.5" Ceiling mount 2 way speaker system (each)
Azden Stereo Microphone (SMX-10)
$ 85.00
Azden Stereo Microphone (SMX-10)
Directional Stereo mic with stereo mini-plug output cable, windscreen and shock-mount holder
Azden Stereo Microphone (SMX-5)
$ 65.00
Azden Stereo Microphone (SMX-5)
Directional Stereo mic with stereo mini-plug output cable, windscreen and shoe-mount
Azden Stereo Shotgun Mic (SMX-100)
$ 499.00
Azden Stereo Shotgun Mic (SMX-100)
High quality stereo microphone: Operates on phantom power with 5 pin XLR output cable. Includes: High density foam windscreen, shock-mount holder in a deluxe carrying case.
Azden Stereo/Shotgun Microphone (SMX-30)
$ 249.00
Azden Stereo/Shotgun Microphone (SMX-30)
Engineered to be the ultimate video microphone the SMX-30 features: Stereo or mono (shotgun) operation, +20 db gain booster, low cut filter, shock-absorbing shoe-mount, LED battery indicator, custom wind screen.
Azden Wired Handheld Microphone (EX-413)
$ 20.00
Azden Wired Handheld Microphone (EX-413)
Omni-directional handheld microphone for PRO Series Transmitter
Azden Wireless Microphone System (WLX-PRO + i)
$ 165.00
Azden Wireless Microphone System (WLX-PRO + i)
Same as WLX-PRO but includes mobile device interface cable. Compatible with Smart Phones and Tablets, DSLR and Video Cameras
Azden Wireless Microphone System (WMS-PRO + i)
$ 185.00
Azden Wireless Microphone System (WMS-PRO + i)
Same as WMS-PRO but includes mobile device interface cable. Compatible with Smart Phones and Tablets, DSLR and Video Cameras
AZDEN WL/T-PRO Pro Series Wireless Lavaliere Microphone and Transmitter #WL/T-PRO
$ 83.89
This Azden microphone is a good choice for indulging you with realistic audio tracks time and time again. It's equal parts comfortable and pro-grade. This Azden microphone is intended for many different uses, which means you are able to use it for speeches, sermons, and ceremonies. Weighing in at 3.4 ounces, this condenser microphone is very light, enabling you to quickly hold it for long periods of time at concerts or recording sessions. The Azden WLT-PRO is extremely sensitive, enabling you to catch all kinds of sounds from the subtle to the loud. Since this Azden microphone includes an omnidirectional pattern, you can pick up your subjects equally well from any direction around the mic. The expanded 50 Hz to 18 kHz frequency response of this condenser microphone helps you to easily catch ultra-low bass notes and crystalline treble tones. Plus, the Azden WLT-PRO is wireless, featuring a 76.2 meter transmit range, which means you are able to benefit from tangle-free performances.
- TRANSMISSION FREQ: F1: 169.445MHz; F2: 170.245MHz
- ANTENNA: Internal Antenna
- MIC UNIT: Omni-Directional Electret -Condensor
- BATTERY: 9V x 1 (not included)
- POWER CONSUMPTION: 30mA
- BATTERY LIFE: 8 to 10 Hours
- DIMENSIONS: 86 x 60 x 21.5 (mm)
- WEIGHT (W/ BATTERY): 98g (3.5oz)
Azden WMS-PRO Wireless Microphone System
$ 158.95
The "all-time" best selling wireless microphone for videography. This versatile system consists of the WM-PRO belt-pack transmitter 2 plug-in electret condenser microphones, a lavalier (EX-503) and handheld (EX-413) and the WR-PRO receiver which comes with both shoe-mount and hook and loop fastener. All receivers and transmitters in the "PRO" Series are on the same 2 frequencies (169.445MHz and 170.245MHz).
Gitzo Microphone Shock Mount G11510N
$ 70.00
Gitzo Microphone Shock Mount G11510N
Helix Camera & Video Gift Card
$ 10.00
This is an in store or online gift card for Helix Camera & Video only. This cannot be redeemed for cash and does not expire. Gift Cards not valid for Rentals, Repairs or Lab Services.
ProMaster SGM1 Compact Shotgun Microphone
$ 79.95
ProMaster SGM1 Compact Shotgun Microphone
ProMaster SKU: 8069 | Helix SKU: PR8069
Overview
The ProMaster SGM1 Compact Shotgun Microphone concentrates your camera's audio on the subject while reducing distracting, surrounding noise. Your videos will have clearer, more understandable sound.
The SGM1's compact design makes it easy to store in your camera bag. It balances well even on smaller cameras. The aluminum housing and gold contacts are designed for quality and durability to provide years of great sound for all your videos.
Includes:
- 1 SGM1 compact directional shotgun microphone
- 1 Shoe-mount microphone holder for camera-top mounting
- 1 Coiled 3.5 mm to 3.5 mm male audio connection cable
- 2 Foam windscreens
- 1 AA battery
Specifications
- Frequency response: 30-18,000Hz
- Sensitivity: -40dB (0dB=1V/Pa at 1KHz)
- Direction: Unidirectional
- Polar pattern: Cardioid
- Output impedance: 200ohms
- Signal to noise ratio: 76dB (1KHz at 1 Pa)
- Max SPL (sound pressure level): 120dB (at 1KHzs 1% T.H.D.)
- Power: 1.5V AA
- Length of coiled cable: 25 cm, strechable to 50 cm
- Dimensions: 185 mm x 22 mm / 7 3/16" x 7/8" (microphone body only)
- Weight: 75 g / 2 5/8 oz (not including battery, windscreen or cable)
ProMaster SGM2 Mini Directional Microphone
$ 49.95
ProMaster SGM2 Mini Directional Microphone
ProMaster SKU: 7927 | Helix SKU: PR79277
Overview
The ProMaster SGM2 is a compact, directional microphone that focuses on sound where it is pointed. It works with cameras, camcorders, recorders, smartphones, tablets, computers and more.
The SGM2 uses a reliable design which requires no batteries and sports an aluminum housing. Using plug-in-power it provides excellent sound that is superior to a built-in mic. Its shock-mount offers a cold foot and 1/4"-20 threaded port. It is a convenient way to mount the mic to a camera, bracket, light stand, clamp, and more.
Two styles of wind screen (foam and furry) are included to ensure the best audio in a variety of conditions
This kit is stored and protected in a very nice semi-rigid case.
This kit also includes 3 different, coiled audio cables making it highly adaptable to use with a variety of recording devices from cameras to phones and more. Each audio cable in the kit is labeled on each side so you know exactly what the connector is for.
- The 3.5mm TRS cable fits most cameras, camcorders, and recorders.
-The 2.5mm TRS cable fits cameras using a smaller 2.5mm connector, like some Fuji cameras do.
- The 3.5mm TRRS cable works with a variety of smartphones, tablets, and computers.
Key Features:
- Batteries not required
- Connects to a huge variety of cameras and smart devices
- "Hears" sound where you point it
Specifications
- Polar pattern: Cardioid
- Capsule: Electret Condenser
- Diaphram: 49/128" / 9.7 mm
- Sound field: Mono
- Frequency response: 35 Hz - 18 kHz
- Maximum SPL: 130 dB
- Sensitivity: -42.0 dB re 1 Volt/Pascal (7.9 mV @ 94 dB SPL) +/- 2 dB @ 1 kHz
- Signal to noise ratio: 76 dB SPL
- Off-axis rejection: > 14 dB at 180 degrees
- Power: Plug-in-power 3 - 10 V
- Output connection: 3.5mm TRS
- Dimensions of mic: 27/32” x 3 7/32” / 21 mm x 82 mm
- Weight of mic: 1 1/8 oz / 32 g
- Dimensions of entire kit, in storage case: 7" x 5 1/4" x 2 3/4" / 17.8 cm x 13.3 cm x 7 cm
- Weight of entire kit, in storage case: 7 1/4 oz / 206 g
Item Includes
- SGM2 mini directional microphone
- Shock-mount
- Foam windscreen
- Furry windscreen
- 3 Audio cables:
- - 2.5mm TRS - 3.5mm TRS
- - 3.5mm TRS - 3.5mm TRS
- - 3.5mm TRS - 3.5mm TRRS
- Storage case
RODE 3.5mm TRRS to TRRS patch 1.6m cable
$ 30.00 - Sold Out
RODE 3.5mm TRRS to TRRS patch 1.6m cable
Rode SKU: SC9 | Helix SKU: RMSC9
Overview
The SC9 is a high-quality 1.5m TRRS to TRRS cable for easy and reliable connection of smartphones to the RØDECaster Pro.
Specifications:
Connector-1 1 x 1/8" / 3.5 mm TRRS Male Straight
Connector-2 1 x 1/8" / 3.5 mm TRRS Male Straight
Cable Length 4.92' / 1.5 m
RODE 3/8" Pivoting Boom Adaptor
$ 30.00 - Sold Out
RODE 3/8" Pivoting Boom Adaptor
The RØDE Pivot Adaptor is a durable machined-aluminium, brass and high-grade polymer adaptor for mounting on boom stands and boompoles, allowing for up to 210 degrees of pivot. A 5/8" to 3/8" adaptor is included.
| Weight | 92.00gm |
| Dimensions | 70.00mmH x 45.00mmW x 33.00mmD |
| Warranty | 1 year |
RODE Blimp with Rycote Lyre Suspension System
$ 299.00 - Sold Out
RODE Blimp with Rycote Lyre Suspension System
- Greatly reduces handling and wind noise
- Accommodates most shotgun microphones 325mm in length and 19-22mm diameter
- Rycote Lyre suspension system onboard with internal spacing guide
- Lightweight skeleton handle with 3/8” thread mount
- Mogami cable with Neutrik and Switchcraft XLR connectors
- Dead Wombat windshield included
- 10 year warranty (no registration required)
The RØDE Blimp is a complete windshield and shock mounting accessory for the NTG1, NTG2, NTG3, NTG4 and NTG4+ microphones, as well as any third party shotgun microphone up to 325mm (12 ¾”) in length. Now featuring the Rycote® Lyre suspension system, the Blimp provides the ultimate in microphone suspension and isolation. Constructed from a single piece of hard-wearing thermoplastic, the Lyre provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap. The Blimp’s handle has also been completely redesigned, reducing the product weight significantly, while increasing the ergonomics for handheld use. Housed inside the grip is a heavy-duty Mogami cable which splits via a junction box to a highly-flexible thin cable inside the Blimp, to minimise the transference of vibration to the microphone. With the lightweight design of the handle and suspension system the new Blimp design is over 25% lighter (550gm without microphone or DeadWombat fitted). The Blimp attaches to any standard boompole via 3/8" thread attachment at the base. The Universal Blimp Mount is available as an option to remove the handle when the Blimp is being used primarily on a boompole to reduce weight. The Dead Wombat windshield, caring brush and tail/patch cable are included. The added confidence of a full ten year warranty* ensures that the Blimp is by far the best microphone windshield system available, further evidenced by a 2009 Red Dot Award and Australian International Design Award for outstanding product design. *Excludes normal wear and tear of Dead Wombat furry cover or any misuse, modification or improper storage and transportation of the product.
| Weight | 550gm |
| Dimensions | 285.00mmH x 490.00mmW x 125.00mmD |
| Warranty | 10 year warranty |
RODE Boompole Bag for Boompole, Shotgun Mic, Softie and Shock Mount
$ 39.95 - Sold Out
Designed to carry the Boompole with attached mic and shock mount.
| Weight | 575.00gm |
| Dimensions | 960.00mmH x 200.00mmW x 20.00mmD |
| Warranty | 1 year |
RODE Boompole Cips (Pack of 5)
$ 12.99 - Sold Out
The RØDE Boompole Clips are designed to quickly and easily mount onto any RØDE boompole to secure the microphone lead and minimise any movement. Pack of 5.
Rode Boompole Microphone Boom Arm
$ 149.00 - Sold Out
View larger
Rode Boompole Microphone Boom Arm
Designed for the professional, the Rode Boompole is a high grade professional boom pole for location recording. The boom pole allows you to mount your microphone securely and swivel it in a range of directions that will allow you to easily change positions and follow your sound source. Machine from high grade aluminium.
Features
- Lightweight aluminium construction
- New ultra smooth extension and retraction system
- Easy to use locking mechanism
- Precision balanced
- Extends from 33 inches to 10 feet
- Compatible with NTG1, NTG2, NTG3, NT4, NT5, NT55 and M3 microphones
RODE Boompole Pro, Carbon Fiber Boom Pole (10')
$ 149.00 - Sold Out
Rode Boompole Pro, Carbon Fiber Boom Pole (10')
Made from carbon fibre, the RØDE Boompole Pro weighs only 535gm (18oz) and, from a compact 810mm (2‘ 8”), extends to a full 3m (10’). Designed for use with professional shotgun microphones such as the RØDE NTG3 as well as the Blimp windshield system, the Boompole Pro joins RØDE’s popular boom pole range which now consists of five models ranging in size, weight, and construction material. Each of the five pole sections is comprised completely from carbon fibre making it incredible lightweight while maintaining high levels of strength. The sections are easily extendable with one hand thanks to an intuitive twist-lock mechanic. RØDE offers boom pole cable clips as an optional accessory, however the company’s new RØDELink wireless XLR adaptor allows users to record audio from a shotgun microphone on the end of the Boompole Pro without the hassle and possible handling noise of cables.
| Weight | 535gm |
| Dimensions | 810mmH x 40mmW x 40mmD |
| Warranty | 1 year |
RODE Broadcaster Condenser Microphone
$ 419.00 - Sold Out
RODE Broadcaster Condenser Microphone
Rode SKU: Broadcaster | Helix SKU: RMBroadcaster
Overview
Precision 1" broadcast cardioid end-address condenser microphone. Features unique 'on air' indicator.
The RØDE Broadcaster is a large diaphragm, end-address condenser microphone designed to provide the ultimate performance for broadcast vocal applications.
Its rich, full quality tailored response has an emphasised proximity effect that has made it a standard in radio stations the world over. It is equally suitable as a voice-over microphone for film and television
The Broadcaster features an internal pop filter, designed to minimise plosives sounds that can overload the microphone capsule and distort the audio output. In addition to the Broadcaster's native 20Hz-20kHz response, a selectable high-pass filter at 75Hz is available which will prevent low-end noise such as air conditioners and traffic from being recorded.
The Broadcaster features an innovative 'On-Air' indicator on the body that can be wired for external activation by the 'Channel On/Mute' function on many consoles. If not connected to a console or switch, the indicator will remain lit whenever the microphone has power.
The RØDE Broadcaster microphone is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.
Specifications
| Acoustic Principle | Pressure Gradient |
| Active Electronics | JFET impedance converter with bipolar output buffer |
| Capsule | 1.00" |
| Polar Pattern |  |
| Address Type | End |
| Frequency Range | 20Hz - 20kHz |
| Output Impedance | 40Ω |
| Maximum SPL | 128dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Maximum Output Level | 2.0mV |
| Sensitivity | -34.0dB re 1 Volt/Pascal (20.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 14dB-A |
| Power Options |
+24V phantom power required from mixer or interface
|
| Weight | 577.00gm |
| Dimensions | 167.00mmH x 50.00mmW x 65.00mmD |
| Output |  |
| Warranty | 1 year with free extension to 10 years following registration |
RODE CLIP1 MiCon Cable Management Clip (Pack of 3)
$ 19.95 - Sold Out
The CLIP1 is a cable management clip, designed to allow optimal mounting of MiCon cables on the microphone user. Supplied in a pack of three.
RODE Custom Pin-Head Replacement Unpainted Mesh Head for the PinMic (Silver)
$ 10.99 - Sold Out
The RØDE Custom Pin-Head is a replacement unpainted mesh head for the PinMic microphone, that can be customised to provide enhanced camouflage. Please note that the microphone capsule is sold separately.
1 Year Warranty
RODE DC to USB Power Cable
$ 20.00
RODE DC to USB Power Cable
Rode SKU: DC-USB1 | Helix SKU: RMDCUSB1
Overview
The DC-USB1 is a handy power adaptor for powering the RØDECaster Pro from any compatible USB output, making the console completely portable. A high-power (2.4A minimum) USB output is required for operation. Power bank is not included.
- Power Adapter for RODECaster Pro
- Use RODECaster Pro with 2.4mA USB Power
- Makes RODECaster Pro Portable
Specifications:
| Power Requirements | USB: 5 V, 2.4 mA DC: 12 V / 1 A |
RODE DDCGO DeadCat Go Artificial Fur Wind Shield
$ 29.95 - Sold Out
RODE DDCGO DeadCat Go Artificial Fur Wind Shield
The DeadCat GO is a furry wind cover for the VideoMic GO, designed for use in windy environments. Its artificial fur is specially designed so as to minimise wind noise while remaining acoustically transparent.
RODE Dead Kitten Windscreen
$ 24.99 - Sold Out
Designed for minimising any wind noise when using the microphone in high wind conditions. Suits SVM, SVMP, NT4, iXY
RODE DeadCat VMP Wind Muff for VideoMic Pro
$ 39.00
RODE DeadCat VMP Wind Muff for VideoMic Pro
The DeadCat VMP is a furry wind cover for the VideoMic Pro, designed for use in windy environments. Its artificial fur is specially designed so as to minimise wind noise while remaining acoustically transparent. The DeadCat VMP is compatible with the VideoMic Pro rubber-band models only (pre May 2015). For VideoMic Pro models with Rycote Lyre onboard please see DeadCat VMPR.
| Weight | 13.00gm |
| Dimensions | 150.00mmH x 95.00mmW x 30.00mmD |
| Warranty | 1 year |
RODE DeadCat VMPR
$ 39.00
RODE DeadCat VMPR
The DeadCat VMPR is a furry wind cover for the VideoMic Pro, designed for use in windy environments. Its artificial fur is specially designed so as to minimise wind noise while remaining acoustically transparent. The DeadCat VMPR is compatible with the VideoMic Pro featuring Rycote Lyre shockmounting (after May 2015). For VideoMic Pro models with band suspension please see DeadCat VMP.
Weight
13gm
Dimensions
150.00mmH x 95.00mmW x 30.00mmD
Compatible Microphones
•
VideoMic Pro
RODE DeadMouse-Pin - Wind Shield
$ 24.99
The DeadMouse-Pin is a professional grade windshield, designed to minimise wind noise to ensure quality recordings in adverse environments with the RØDE PinMic.
RODE DeadWombat Artificial Fur Wind Shield for Blimp
$ 49.95
The DeadWombat windshield is designed for minimising wind noise when recording in high wind conditions using the RØDE Blimp.
RODE DS-1 Microphone Desk Stand
$ 29.99 - Sold Out
The DS1 is a weighted table top microphone stand.
RODE GN1 Flexible Gooseneck for NT-6 Microphone
$ 19.95 - Sold Out
Miniature (85mm) flexible goose neck for NT6. By using the GN1 with NT6 microphone stand you get an added height that allows you to have total control over the placement of the NT6.
RODE Grip+ for iPhone 5c - Multi-Purpose Mount & Lens Kit
$ 79.00 - Sold Out
Multi-purpose mount and lens kit for iPhone 5C
The RØDEGrip+ is a multi-purpose mounting solution with high-quality lens kit for the Apple iPhone 5, iPhone 5s, iPhone 5c, iPhone 4 and iPhone 4S. Featuring a camera-shoe mount with a 3/8" thread in the base that can be mounted in three different positions, the RØDEGrip can be used in a number of orientations and setups. These include:
- Handheld pistol grip filming with the iPhone
- Handheld audio recording with the i-XY stereo microphone
- Boom stand mounted audio recording with the i-XY
- Camera-mounted audio recording with the i-XY
- Desktop mounted for handsfree iPhone display and filming
- Camera-mounted iPhone display for photography apps
| Weight | 90.00gm |
| Dimensions | 110.00mmH x 50.00mmW x 40.00mmD |
| Warranty | 1 year |
RODE Grip+ Multipurpose Mount and Lens Kit for the iPhone 5/5s
$ 79.00 - Sold Out
Multi-purpose mount and lens kit for iPhone 5 & iPhone 5S
RODE HS1-B Headset Microphone (Black)
$ 299.00 - Sold Out
Ultra lightweight and ergonomic omnidirectional headset microphone (black).
- Ultra discreet appearance
- Available in Pink or Black
- Omni-directional polar pattern
- Three axes of mechanical adjustment for perfect fit with malleable tube arm and headband for finer adjustment
- Lightweight construction for complete comfort
- Corrosion resistant stainless steel tube arm
- Low handling noise
- Includes Mini-furry and pop filter / windshield
- RØDE MiCon interconnectivity system provides interface with a wide range of wireless systems
- Five year extended warranty when you register your microphone
The RØDE HS1 is a discreet and lightweight headset microphone that provides clean, clear and pronounced audio for any application where the microphone needs to be in close proximity to presenter's mouth.
Subtle, ergonomic design including three axes of mechanical adjustment, a malleable, ultra lightweight tube arm and headband, and the choice of either black (HS1-B) or pink (HS1-P) models ensure the perfect fit and function for each individual.
The HS1's light weight, comfortable fit, low self-noise, minimal appearance and user friendly omni-directional polar pattern make it an ideal microphone for film, television, video, theatre, house of worship and live vocal performance.
The headset is connected via a 1.2m (4') shielded, detachable Kevlar® reinforced cable that has been rigorously strain tested up to 10kg to ensure reliable performance. Integrated cable management on the retainer body and an additional cable management clip minimises visibility, while providing maximum mobility for the wearer.
The included mini-furry for high wind protection ensures quality recordings in adverse environments, and the supplied anti-trauma water resistant case provides rugged and secure protection for the microphone, cable, clips and included accessories and tools.
Knowing that versatility is paramount in any product, RØDE has developed the MiCon™ connector system which provides seamless integration between the HS1 headset microphone and a wide range of wireless systems as well as consoles, cameras and portable recorders.
The RØDE HS1 headset is designed and made in Australia, and is covered by RØDE Microphones' innovative 5 year 'no questions asked' warranty which provides 12 months of complete cover, and an optional US$99 replacement microphone during the extended warranty period.
| Acoustic Principle | Pressure Gradient |
| Active Electronics | JFET impedance converter |
| Capsule | 0.10" |
| Polar Pattern |  |
| Address Type | End |
| Frequency Range | 60Hz - 18kHz |
| Output Impedance | 3000Ω |
| Maximum SPL | 122dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Maximum Output Level | 189.0mV |
| Sensitivity | -47.2dB re 1 Volt/Pascal (21.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 36dB-A |
| Power Options | |
| Weight | 6.50gm |
| Dimensions | 65.00mmH x 180.00mmW x 200.00mmD |
| Output |  |
| Warranty | 1 year with free extension to 5 years following registration here |
IN THE BOX:
