$ 19.00
SealLife SKU: SL911 | Helix SKU: SL911
Eats humidity, kills moisture
Moisture Muncher Packs absorb moisture to prevent fogging and corrosion of your valuable electronics and cameras. Use inside an airtight storage case or container to create a perfect dry environment for your valuable items.
Each package contains ten (10) 1.5g capsules containing color indicating silica gel. When gel turns from blue to pink, full absorption has been reached.
$ 349.00 - Sold Out
$ 449.00 - Sold Out
SeaLife SKU: SL671 | Helix SKU: SL671
Powerful 2500 lumen LED light using the latest COB LED array technology
One button control for easy operation - one button to power light on/off and select brightness
Three brightness levels: 100%, 50% and 25%
Hidden emergency signal mode: 1 second blink interval and SOS Morse code
60 minute burn time at full power and constant brightness
Depth rated to 200 feet/60 meters
Easy to expand with Flex-Connect™ trays, grips and Flex Arms, handle, Y-S, ball joint, cold shoe and other accessories
Quick-release button to detach light and aim in crevices and hard to reach areas
120° wide beam angle evenly illuminates the subject with no hot spots (90° underwater)
Corrosion-proof metal light head for heat dispersion and durability
Removable 25W Li-Ion battery w/ charger and international plug adapters included
Waterproof battery compartment - even if the O-ring seal fails, the battery compartment is isolated so water cannot reach the internal electronics
Universal mounting screw fits SeaLife and other brands of underwater cameras w/ standard ¼-20 tripod mount
Sea Dragon 2500 Underwater Photo/Video Light head
Flex-Connect Single Tray w/ standard ¼-20 mounting screw
Flex-Connect grip
25Wh Lithium Ion rechargeable battery
AC Power Adapter, charging tray, and international plug adapters
Adapter for GoPro cameras with acorn nut
Spare O-rings, O-ring lubricant, O-ring removal tool
Instruction manual
Sea Dragon Case
Sea Dragon 2500 Photo/Video/Dive Light Specifications
Body Material | Anodized aluminum light head with fiber-reinforced polycarbonate body |
Light Source/Bulb Type | 1 x COB LED array (COB - Chip On Board) |
Brightness | 2500 lumens (maintains 2500 lumens throughout burn time at full power) |
Effective Range | 4 ft/1.2 m (depends on camera model and visibility) |
Brightness Levels | Full power (100%), half power (50%), and quarter power (25%) |
Button Control | Long push (1 sec) to power light on/off; Short push cycles through 100% → 50% → 25% → 100% [repeat cycle] |
Light Modes | Constant light or emergency signal light (activated by long push of power button); one second flash or SOS at full power |
Color Temperature | 5000K |
Color Rendering Index* | 90 |
Beam Angle | 120 degrees (90-degrees underwater) |
Battery | Lithium Ion 7.4V, 3400 mAh, 25Wh (included) |
Battery Charge Time | 170 minutes |
Run Time | 60 minutes at full power/120 minutes at half power/240 minutes at quarter power |
Depth | Tested to 200 feet/60 meters |
Dimensions |
4.8" x 2.2" x 3.8" (12.2cm x 5.6cm x 9.7cm), head only |
Weight | 9oz (255g) head only without battery ; 12.9oz (365g) head with battery |
Bulb Life | 35,000 hours |
O-ring | Dual NBR o-rings (lube included) |
Buoyancy |
Negative |
*CRI is a measure of a light source's ability to show object colors "realistically" or "naturally" compared to daylight, which has a CRI of 100 and represents the maximum value.
The beam angles for the Sea Dragon lights are shown as the true, tested “in-air” (above water) beam angle. Underwater, due to light refraction, the angle tightens to approximately 33% less.
Avoid using this Sea Dragon light above water for prolonged periods of time
The light is designed for underwater use and water is needed to displace heat. The metal light head at full power will reach temperature of about 140F (60C) degrees within a few minutes, which may cause burning if touched. A thermal sensor will automatically dim the light if internal temperatures reaches 150F (65C) degrees. Immediately turn off light if any parts of the light become hot to the touch.
$ 6.49
Silicone lubricant compatible with all Ikelite o-rings. Tear-off tubes cannot be resealed, so we recommend keeping in a plastic zip-top bag for travel. This lubricant is thick enough that it typically will not run out of the tube unless squeezed.
$ 64.95
$ 24.95 - Sold Out
Mounts to the Ikelite Quick Release Handle for attachment of 3/4 in flex arms.
$ 199.95
$ 275.00 - Sold Out
$ 220.00
$ 12.00 - Sold Out
$ 259.95 - Sold Out
Ikelite SKU: 6270.06 | Helix SKU: IK627006
Features
Dive into underwater photography with this compact and easy to use system. Durable clear polycarbonate construction provides a unique view of the camera to ensure correct waterproof installation and confidence underwater. The camera installs with drop-in loading for quick and easy set up. Simply close the side latch and see the o-ring form a solid black, watertight seal. Large, ergonomic controls provide access to all important camera functions.
The nature of this camera's lens prevents the effective use of external wide angle lenses.
Ikelite products are designed, built and tested in the USA. We use locally sourced, top-grade materials. Our housings are built by hand and individually tested for fit, function and waterproof integrity. We back our products with over 50 years of experience and service within the dive industry.
Flash
An included flash diffuser improves lighting quality when the camera's built-in flash is used. A built-in flash is effective between 1-3 feet (0.3-0.9m) from the subject in clear conditions. For best results a color correcting filter or external lighting is recommended. External lighting is more powerful and can be placed in a position to virtually eliminate the backscatter - or "snow" - from your underwater images.
Two fiber optic ports are provided for the connection of up to two Ikelite-, SEA&SEA-, or Olympus-type fiber optic cords.
Compatibility
The Panasonic LUMIX TS6 and FT6 cameras may also be used in the previous model housing built for the Panasonic LUMIX TS5 and FT5 cameras, item # 6270.05. However, very minor vignetting (dark shadows in the corners of the images) will be present. The lens port of this housing has been modified to be free of vignetting with both older and newer camera models.
200 ft (60m) depth rating
Controls for all camera functions
Near neutral buoyancy in fresh water
12-24 thread tray mounting with 3" (76mm) spacing
1 lb (450 g)
5.9 x 4.7 x 3.0-inch (15 x 11.9 x 7.6 cm)
2.2" diameter glass lens port
Housing
O-ring # 0132.45
Port cover # 0200.02
Lanyard # 0321.10
Silicone lubricant # 0184.1
1 year limited warranty
$ 184.95
Ikelite SKU: 47013 | Helix SKU: 47013
This valve is appropriate for older clear housings which do not feature a spare accessory port. Simply remove any control with a knob and replace it with this vacuum valve. Refer to the Vacuum System Compatibility Chart (below) for suggestions of where to install the valve.
We do not offer the addition of a spare accessory port.
$ 194.95
Ikelite SKU: 47012 | Helix SKU: 47012
Most newer housings with an opaque white front feature a spare 1/2-20 threaded accessory port. The plug of this spare port may be replaced with this vacuum valve.
Additionally, it can be installed in place of the 1/4-20 top mount featured on all DSLR housings produced since 2009.
$ 59.95
Ikelite SKU: 47011 | Helix SKU: 47011
Hand pump with gauge for vacuum valves.
$ 15.00 - Sold Out
Ikelite SKU: 47005 | Helix SKU: 47005
Tubing hose fitting for Vacuum Pump with Gauge, Product number 47011. Vacuum pump sold separately.
$ 124.95
Ikelite SKU: 47003 | Helix SKU: 47003
This valve is appropriate for older clear housings which do not feature a spare accessory port. Simply remove any control with a knob and replace it with this vacuum valve. Refer to the Vacuum System Compatibility Chart (below) for suggestions of where to install.
We do not offer the addition of a spare accessory port.
$ 15.00
Ikelite SKU: 0591.4 | Helix SKU: 05914
The Battery Cover is designed to keep dirt and debris out of the battery pack charger socket and contact points when the battery pack is removed from the strobe front. This protective cap may be attached to the battery pack whenever storing or traveling with the battery pack separate from the strobe front.
The Battery Cover DOES NOT create a waterproof seal. Battery packs must be attached to a compatible strobe front to be waterproof.
Compatible with 4067 Li-Ion Battery Pack, 4066.5 NiMH Battery Pack, and 4066 Ni-Cad Battery Pack for DS125, DS160 and DS161 strobes. Battery Pack not included.
$ 17.95
Ikelite SKU: 0200.08 | Helix SKU: 020008
Vinyl covers in a variety of diameters to protect lens ports.
1.75-inch fits the EV Manual Controller.
2-inch fits 46mm threaded lens ports.
3-inch fits most 67mm threaded lens ports found on compact digital and video housings, as well as the Mirrorless Flat Macro Port Standard.
3.9-inch fits compact digital ports which accept the WD-4 Dome, as well as the Modular Flat Front for DSLR housings.
$ 12.95
Ikelite SKU: 0105 | Helix SKU: 0105
Replacement seal for DSLR Housings with the FL (Four Lock) port system. This o-ring fits between the housing and the lens port. Requires light lubrication with Ikelite silicone lubricant, sold separately.
Not for use between the Lens Extension and Modular 8-inch Dome or Flat Front. Not for use with housings featuring DL or DLM port systems.
$ 29.00
SeaLife SKU: SL978 | Helix SKU: SL978
SeaLife 52-67mm Step-Up Ring
$ 99.00
SeaLife SKU: SL571 | Helix SKU: SL571
Capture sharp macro images and videos with SeaLife Micro cameras
The Super Macro Close Up Lens captures macro images and videos from 3.5” to 7” (9cm to 18cm). The lens features a 2-element optical grade wet lens with anti-reflective coating and anodized aluminum construction with rubber press-on lens mount.
Includes two (white) removable focus distance sticks (4.75"/18.7mm), safety lanyard and protective pouch.
$ 3.95 - Sold Out
$ 54.95
This kit has everything you'll need to use Gamma as a focus assist or macro video light. It's also super lightweight and flexible, so your Gamma can shine where it's needed most. 3/4 inch Flex Components act as a lightweight and comfortable handle for your compact system. Gamma flashlight not included.
GoPro not included and not available through Ikelite. Optional trays and lights sold separately.
$ 59.95 - Sold Out
A dual tray designed to combine the AF35 strobe kit with a secondary lighting accessory.
$ 50.00
Mounts to our Quick Release Handle for attachment of 1-inch diameter ball arms from Ikelite, TLC, Ultralight, Nauticam, and others. Requires a compatible 1-inch Ball Clamp, sold separately. Extended length allows for the attachment of the EV Manual Controller.
$ 49.00 - Sold Out
One of our most popular strobe arms pre-assembled and ready to be attached to your DS50 or DS51 strobe. A great start to any system, providing flexibility to shoot both wide angle and macro photography. Includes flex ball at release handle, flex ball at Micro Tray or DSLR top mount, 12 pieces of 3/4 flex arm extension and mount at DS50 or DS51 type strobe.
$ 179.00
$ 224.95 - Sold Out
Measure your lens or use the Port Finder to determine compatibility.
$ 299.95 - Sold Out
$ 149.95
Flat ports are recommended for standard, macro and telephoto lenses. Due to refraction, flat ports reduce the angle of coverage of a lens and magnify the image. This makes the flat port ideal when using standard, macro or zoom lenses to shoot small subjects.
Note that if a port is long enough to accommodate the full length of a 1:1 macro lens, the lens may vignette when used at infinity. If access to the lens' full range is desired, then select a dome port instead.
Accommodates lenses up to 3.5-inch (8.9 cm) long and 3.3-inch (8.4 cm) in diameter. Measure your lens or use our Port Finder to determine compatibility.
$ 179.95
Y-shaped sync cord with an Ikelite-style plug on the housing end and SEA&SEA / INON-style plugs on the strobe ends. The Ikelite-style plug is widely recognized as the most reliable waterproof strobe sync connection available. Built-in strain reliefs reduce stress on cord ends.
SEA&SEA / INON strobes are unable to power the TTL circuitry in our housings. Thus, these strobes will operate in Manual exposure settings only. TTL communication through Ikelite housings is not supported by SEA&SEA / INON strobes.
This cord requires the attachment of two strobes for waterproof operation. To shoot with only one strobe, try a single sync cord instead.
$ 39.99
The Morris Aqua F-6TTL underwater strobe is rated to 165' (50m). The Aqua F-6TTL offers TTL exposure control with the Nikonos V camera and can also be used in manual mode with Full and 1/4 power settings for non-TTL Nikonos connection cameras.
Configuration | Strobe head Arm Sync cord |
Guide No. | 125 Surface, 28 Underwater |
Power Rating | Not specified |
Coverage Angle | 90° with diffuser |
Depth Rating | 165' (50m) |
Flash Modes | TTL, Manual |
Exposure Control | Full and 1/4 power |
Slave | No |
Targeting Light | No |
Audible Signal | No |
Color Temperature | Not specified |
Recycle Time | 10 Seconds |
Flashes (Full Power) | Not specified |
Power Source | 4x AA Batteries |
Dimensions | Not specified |
Weight (Land) | Not specified |
$ 974.95
A compact, full-featured waterproof housing for scuba diving, surf, pool, and creative photo opportunities anywhere there's water.
This housing requires the addition of a compatible lens port for waterproof operation. Lens port not included.
$ 974.95
A compact, full-featured waterproof housing for scuba diving, surf, pool, and creative photo opportunities anywhere there's water.
This housing requires the addition of a compatible lens port for waterproof operation. Lens port not included.
$ 29.95
$ 60.00
A rigid anodized aluminum arm with balls at each end to extend your strobe arm. Requires compatible clamp at each end. Add an extension and clamp to your existing strobe arm for reduced backscatter and more creative lighting effects when shooting with a wide angle lens. 9 in (22 cm) extension with 1.25 in (3.2 cm) diameter balls at each end.
$ 49.95
A rigid anodized aluminum arm with balls at each end to extend your strobe or video light arm. Add an extension and clamp to your existing strobe arm for reduced backscatter and more creative lighting effects when shooting with a wide angle lens.
The slotted design allows for the attachment of a lightweight accessory in the middle of the extension. When used with our Sliding Ball Mount, the additional accessory is able to move up and down the length of the arm for quick repositioning during a dive.
$ 41.00
$ 224.95 - Sold Out
$ 749.95
Ikelite Product Number 6182.78
Dive into underwater photography with this compact yet sophisticated system!
$ 395.00
$ 495.00
$ 949.00 - Sold Out
$ 799.00 - Sold Out
$ 124.95
For SEA&SEA or Nauticam housings with internal fiber-optic flash triggering devices, we recommend the Fiber Optic Converter, see below.
$ 99.95
$ 19.95
Ikelite SKU: 0200.5 | Helix SKU: 02005
Neoprene cover with drawstring to fit DSLR Standard Flat Ports featuring a molded plastic front ring.
$ 1,399.95 - Sold Out
The DS161 combines power with wide angle coverage to give you the most bang for your buck. This kit provides everything you need to add a strobe to any Ikelite TTL system for Compact Digital, Mirrorless, or DSLR camera.
The quality of light is exceptional due to a round flash tube and custom powder coated reflector designed specifically to deliver the softest, most even coverage possible. Strobes with a straight flashtube may be capable of high powers, but require the addition of a diffuser to spread out their sharp, rectangular beam pattern and reduce the harsh hot spot. The DS161 beam is designed to be perfectly soft and wide spread through its reflector design, and is capable of providing you the coverage and power you want and avoiding the one f/stop loss caused by adding a diffuser.
DS160 and DS161 strobes are legendary for their ability to keep up in rapid firing situations—a cut above any flash on the market. Electrical sync connection and a high-capacity battery pack provide the speed you need to capture fast moving subjects like sharks and sailfish at just the right millisecond.
When combined with a compatible TTL system, the DS161 automatically adjusts brightness to provide perfect exposure whether you're shooting macro, portrait or wide angle. Focus on your camera settings and composition and enjoy the increased number of flashes and even faster recycle time you'll get when working with a TTL system.