RODE DeadCat VMP Wind Muff for VideoMic Pro
$ 39.00 - Sold Out
RODE DeadCat VMP Wind Muff for VideoMic Pro
The DeadCat VMP is a furry wind cover for the VideoMic Pro, designed for use in windy environments. Its artificial fur is specially designed so as to minimise wind noise while remaining acoustically transparent. The DeadCat VMP is compatible with the VideoMic Pro rubber-band models only (pre May 2015). For VideoMic Pro models with Rycote Lyre onboard please see DeadCat VMPR.
| Weight | 13.00gm |
| Dimensions | 150.00mmH x 95.00mmW x 30.00mmD |
| Warranty | 1 year |
RODE DeadCat VMPR
$ 39.00
RODE DeadCat VMPR
The DeadCat VMPR is a furry wind cover for the VideoMic Pro, designed for use in windy environments. Its artificial fur is specially designed so as to minimise wind noise while remaining acoustically transparent. The DeadCat VMPR is compatible with the VideoMic Pro featuring Rycote Lyre shockmounting (after May 2015). For VideoMic Pro models with band suspension please see DeadCat VMP.
Weight
13gm
Dimensions
150.00mmH x 95.00mmW x 30.00mmD
Compatible Microphones
•
VideoMic Pro
RODE DeadMouse-Pin - Wind Shield
$ 24.99
The DeadMouse-Pin is a professional grade windshield, designed to minimise wind noise to ensure quality recordings in adverse environments with the RØDE PinMic.
RODE DeadWombat Artificial Fur Wind Shield for Blimp
$ 49.95
The DeadWombat windshield is designed for minimising wind noise when recording in high wind conditions using the RØDE Blimp.
Rode Directional Microphone for iPhone and iPad VideoMic Me
$ 59.00 - Sold Out
Rode Directional Microphone for iPhone and iPad VideoMic Me
The VideoMic Me is a compact and lightweight, high-quality directional microphone with that connects directly to the iPhone TRRS microphone/headphone socket. Its flexible mounting bracket accommodates a wide range of smartphones and allows the microphone to be fitted for primary camera or front camera ('selfie') use. A 3.5mm headphone jack on the rear allows for play-through of audio while recording (app dependent) as well as easy playback of your videos without having to remove the microphone. The VideoMic Me includes a deluxe furry windshield for shooting outdoors or in adverse weather.
| Acoustic Principle | Pressure Gradient |
| Active Electronics | JFET impedance converter |
| Capsule | 0.50" |
| Polar Pattern |  |
| Address Type | End |
| Frequency Range | 100Hz - 20kHz |
| Maximum SPL | 140dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Sensitivity | -33.0dB re 1 Volt/Pascal (22.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 20dB-A |
| Power Options | |
| Weight | 34gm |
| Dimensions | 38mmH x 21mmW x 80mmD |
| Output |  |
| Warranty | 1 year with free extension to 2 years following registration |
RODE DS-1 Microphone Desk Stand
$ 29.99 - Sold Out
The DS1 is a weighted table top microphone stand.
RODE GN1 Flexible Gooseneck for NT-6 Microphone
$ 19.95 - Sold Out
Miniature (85mm) flexible goose neck for NT6. By using the GN1 with NT6 microphone stand you get an added height that allows you to have total control over the placement of the NT6.
RODE Grip+ for iPhone 5c - Multi-Purpose Mount & Lens Kit
$ 79.00 - Sold Out
Multi-purpose mount and lens kit for iPhone 5C
The RØDEGrip+ is a multi-purpose mounting solution with high-quality lens kit for the Apple iPhone 5, iPhone 5s, iPhone 5c, iPhone 4 and iPhone 4S. Featuring a camera-shoe mount with a 3/8" thread in the base that can be mounted in three different positions, the RØDEGrip can be used in a number of orientations and setups. These include:
- Handheld pistol grip filming with the iPhone
- Handheld audio recording with the i-XY stereo microphone
- Boom stand mounted audio recording with the i-XY
- Camera-mounted audio recording with the i-XY
- Desktop mounted for handsfree iPhone display and filming
- Camera-mounted iPhone display for photography apps
| Weight | 90.00gm |
| Dimensions | 110.00mmH x 50.00mmW x 40.00mmD |
| Warranty | 1 year |
RODE Grip+ Multipurpose Mount and Lens Kit for the iPhone 5/5s
$ 79.00 - Sold Out
Multi-purpose mount and lens kit for iPhone 5 & iPhone 5S
RODE HS1-B Headset Microphone (Black)
$ 299.00 - Sold Out
Ultra lightweight and ergonomic omnidirectional headset microphone (black).
- Ultra discreet appearance
- Available in Pink or Black
- Omni-directional polar pattern
- Three axes of mechanical adjustment for perfect fit with malleable tube arm and headband for finer adjustment
- Lightweight construction for complete comfort
- Corrosion resistant stainless steel tube arm
- Low handling noise
- Includes Mini-furry and pop filter / windshield
- RØDE MiCon interconnectivity system provides interface with a wide range of wireless systems
- Five year extended warranty when you register your microphone
The RØDE HS1 is a discreet and lightweight headset microphone that provides clean, clear and pronounced audio for any application where the microphone needs to be in close proximity to presenter's mouth.
Subtle, ergonomic design including three axes of mechanical adjustment, a malleable, ultra lightweight tube arm and headband, and the choice of either black (HS1-B) or pink (HS1-P) models ensure the perfect fit and function for each individual.
The HS1's light weight, comfortable fit, low self-noise, minimal appearance and user friendly omni-directional polar pattern make it an ideal microphone for film, television, video, theatre, house of worship and live vocal performance.
The headset is connected via a 1.2m (4') shielded, detachable Kevlar® reinforced cable that has been rigorously strain tested up to 10kg to ensure reliable performance. Integrated cable management on the retainer body and an additional cable management clip minimises visibility, while providing maximum mobility for the wearer.
The included mini-furry for high wind protection ensures quality recordings in adverse environments, and the supplied anti-trauma water resistant case provides rugged and secure protection for the microphone, cable, clips and included accessories and tools.
Knowing that versatility is paramount in any product, RØDE has developed the MiCon™ connector system which provides seamless integration between the HS1 headset microphone and a wide range of wireless systems as well as consoles, cameras and portable recorders.
The RØDE HS1 headset is designed and made in Australia, and is covered by RØDE Microphones' innovative 5 year 'no questions asked' warranty which provides 12 months of complete cover, and an optional US$99 replacement microphone during the extended warranty period.
| Acoustic Principle | Pressure Gradient |
| Active Electronics | JFET impedance converter |
| Capsule | 0.10" |
| Polar Pattern |  |
| Address Type | End |
| Frequency Range | 60Hz - 18kHz |
| Output Impedance | 3000Ω |
| Maximum SPL | 122dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Maximum Output Level | 189.0mV |
| Sensitivity | -47.2dB re 1 Volt/Pascal (21.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 36dB-A |
| Power Options |  |
| Weight | 6.50gm |
| Dimensions | 65.00mmH x 180.00mmW x 200.00mmD |
| Output |  |
| Warranty | 1 year with free extension to 5 years following registration here |
IN THE BOX:
RODE HS1-P Headset Microphone (Pink)
$ 299.00 - Sold Out
Ultra lightweight and ergonomic omnidirectional headset microphone (pink).
- Ultra discreet appearance
- Available in Pink or Black
- Omni-directional polar pattern
- Three axes of mechanical adjustment for perfect fit with malleable tube arm and headband for finer adjustment
- Lightweight construction for complete comfort
- Corrosion resistant stainless steel tube arm
- Low handling noise
- Includes Mini-furry and pop filter / windshield
- RØDE MiCon interconnectivity system provides interface with a wide range of wireless systems
- Five year extended warranty when you register your microphone
The RØDE HS1 is a discreet and lightweight headset microphone that provides clean, clear and pronounced audio for any application where the microphone needs to be in close proximity to presenter's mouth.
Subtle, ergonomic design including three axes of mechanical adjustment, a malleable, ultra lightweight tube arm and headband, and the choice of either black (HS1-B) or pink (HS1-P) models ensure the perfect fit and function for each individual.
The HS1's light weight, comfortable fit, low self-noise, minimal appearance and user friendly omni-directional polar pattern make it an ideal microphone for film, television, video, theatre, house of worship and live vocal performance.
The headset is connected via a 1.2m (4') shielded, detachable Kevlar® reinforced cable that has been rigorously strain tested up to 10kg to ensure reliable performance. Integrated cable management on the retainer body and an additional cable management clip minimises visibility, while providing maximum mobility for the wearer.
The included mini-furry for high wind protection ensures quality recordings in adverse environments, and the supplied anti-trauma water resistant case provides rugged and secure protection for the microphone, cable, clips and included accessories and tools.
Knowing that versatility is paramount in any product, RØDE has developed the MiCon™ connector system which provides seamless integration between the HS1 headset microphone and a wide range of wireless systems as well as consoles, cameras and portable recorders.
The RØDE HS1 headset is designed and made in Australia, and is covered by RØDE Microphones' innovative 5 year 'no questions asked' warranty which provides 12 months of complete cover, and an optional US$99 replacement microphone during the extended warranty period.
| Acoustic Principle | Pressure Gradient |
| Active Electronics | JFET impedance converter |
| Capsule | 0.10" |
| Polar Pattern | |
| Address Type | End |
| Frequency Range | 60Hz - 18kHz |
| Output Impedance | 3000Ω |
| Maximum SPL | 122dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Maximum Output Level | 189.0mV |
| Sensitivity | -47.2dB re 1 Volt/Pascal (21.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 36dB-A |
| Power Options | |
| Weight | 6.50gm |
| Dimensions | 65.00mmH x 180.00mmW x 200.00mmD |
| Output | |
| Warranty | 1 year with free extension to 5 years following registration here |
IN THE BOX:
RODE iClamp iPhone 4/4S Mount for iXY Mic
$ 14.99 - Sold Out
Heavy-duty clamp to provide additional support for iXY and iPhone 4/4S
The RØDE iClamp is a heavy-duty clamp designed to provide additional support for your i-XY stereo microphone (30-pin version) during high movement usage with an iPhone 4 or iPhone 4S. Please note that the iClamp is not compatible with the Lightning version of the i-XY.
| Weight | 6.00gm |
| Dimensions | 25.00mmH x 40.00mmW x 50.00mmD |
| Warranty | 1 year |
RODE invisiLav Discreet Lavalier Mounting System (10-Pack)
$ 40.00 - Sold Out
Discreet skinsafe mount for lavalier microphones. Supports RODE Lavalier and smartLav. Pack of 10.
The RØDE invisiLav is designed to aid the concealing of the Lavalier and smartLav microphones. Its soft construction absorbs noise and vibration, while the wide, flat profile provides coverage from the elements and allows for versatile mounting. There's two mounting points in case a redundant mic is required, and cable management on the side. Available in either a pack of three or a bulk pack of ten, the invisiLav comes with pre-cut, skinsafe adhesive that can be used to stick the invisiLav to either the body or to fabric. The invisiLav itself is also made from a medical grade skin safe material so it can be mounted on the body without fear of irritation.
| Weight | 5.00gm |
| Dimensions | 18.00mmH x 25.00mmW x 6.00mmD |
| Warranty | 1 year |
RODE invisiLav Discreet Lavalier Mounting System (3-Pack)
$ 18.00 - Sold Out
Discreet skinsafe mount for lavalier microphones. Supports RODE Lavalier and smartLav. Pack of 3.
The RØDE invisiLav is designed to aid the concealing of the Lavalier and smartLav microphones. Its soft construction absorbs noise and vibration, while the wide, flat profile provides coverage from the elements and allows for versatile mounting. There's two mounting points in case a redundant mic is required, and cable management on the side. Available in either a pack of three or a bulk pack of ten, the invisiLav comes with pre-cut, skinsafe adhesive that can be used to stick the invisiLav to either the body or to fabric. The invisiLav itself is also made from a medical grade skin safe material so it can be mounted on the body without fear of irritation.
RODE iXY-L Stereo Microphone (Lightning Connector)
$ 199.00 - Sold Out
RODE iXY-L Stereo Microphone (Lightning Connector)
Rode SKU: iXY-L | Helix SKU: RMiXYL
Overview
Digital stereo microphone (up to 24/96K recording) for lightning-compatible Apple devices including iPhone 5, 5s & 5c. Supplied with carry case and windshield.
- Record stereo audio at 24-bit, 96kHz*
- Matched pair of 1/2" cardioid condenser capsules
- Metal casing for enhanced durability and electromagnetic interference immunity.
- Includes windshield, zip case
- Software-switchable 72Hz high pass filter for reduction of unwanted low frequency noise.
- iXY-L compatible with iPhone 5, iPhone 5s, iPhone 5c, iPhone 6 and iPhone 6plus.
- iXY-30PIN compatible with iPhone 4s and earlier
- Twelve month warranty
The RØDE i-XY is the ultimate recording microphone for iPhone® and iPad®. With up to 24-bit/96k* recording and on-board high-fidelity A/D conversion, your i-XY recordings are rich, smooth and accurate. At the heart of the i-XY is a matched pair of ½” cardioid condenser capsules, fixed in a perfect 90 degree ‘near-coincident’ alignment. This results in immersive and true-to-life stereo recordings, captured in incredibly high detail. Designed and manufactured in Australia, the i-XY is available in two versions - Lightning and 30-pin. The Lightning version supports the iPhone® 5s, iPhone® 5 and iPhone® 5c. The 30-pin version supports the iPhone® 4S, iPhone® 4, iPad® (3rd generation) and iPad® 2. A foam windshield is supplied for outdoor recording as well as a reinforced protective zip case to ensure your i-XY is available whenever you need it. *RØDE Rec or RØDE Rec LE app required for 24/96 quality. iPhone and iPad are trademarks of Apple Inc., registered in the U.S. and other countries.
Specifications
| Acoustic Principle | Pressure Gradient |
| Capsule | 0.50" |
| Polar Pattern |
|
| Address Type | End |
| Frequency Range | 20Hz - 20kHz |
| Output Impedance | 0Ω |
| Maximum SPL | 120dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Sensitivity | -42.0dB re 1 Volt/Pascal (8.52mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 18dB-A |
| Weight | 40.00gm |
| Dimensions | 46.00mmH x 55.00mmW x 40.00mmD |
| Warranty | 1 year |
What's in the Box
|
i-XY (Lightning Version) Stereo Microphone for Apple iPhone® & iPad® |
 |
Wind Shield |
 |
Zip Pod |
RODE LAV-CLIP Clip Mount for RODE Lavaliers (Pack of 3)
$ 24.99 - Sold Out
The LAV-CLIP is an ergonomic and discreet clip mount for the RØDE Lavalier microphone.The LAV-CLIP is supplied in a pack of three.
RODE Lav-Headset Headset mount for Lavalier Microphones - Junior Size
$ 25.00 - Sold Out
Headset mount for Lavalier Microphones. Compatible with RØDE Lavalier and smartLav+. Junior size.
The Lav-Headset is an innovative and ergonomic headset-style wearable mount that offers increased versatility for users of the RØDE Lavalier and smartLav+ lapel microphones. It allows the microphone to be worn in close proximity to the mouth for optimal audio performance.
Engineered from spring steel that has been plated for lifelong durability, the mount is designed to hold its shape throughout the rigors of repeated use. Integrated cable management at the rear of the mount ensures that the microphone cable is tightly secured and provides strain relief.
The Lav-headset is available in three sizes to comfortably accommodate a range of head sizes. As a general guide the sizes are:
- Junior – Ages up to 13
- Medium – Teen to Adult
- Large – Larger Adult
Lav-Headset Specifications:
| Weight | 5gm |
| Dimensions | 100mmH x 140mmW x 200mmD |
| Warranty | 1 year |
RODE Lav-Headset Headset mount for Lavalier Microphones - Large Size
$ 25.00 - Sold Out
Headset mount for Lavalier Microphones. Compatible with RØDE Lavalier and smartLav+. Large size.
The Lav-Headset is an innovative and ergonomic headset-style wearable mount that offers increased versatility for users of the RØDE Lavalier and smartLav+ lapel microphones. It allows the microphone to be worn in close proximity to the mouth for optimal audio performance.
Engineered from spring steel that has been plated for lifelong durability, the mount is designed to hold its shape throughout the rigors of repeated use. Integrated cable management at the rear of the mount ensures that the microphone cable is tightly secured and provides strain relief.
The Lav-headset is available in three sizes to comfortably accommodate a range of head sizes. As a general guide the sizes are:
- Junior – Ages up to 13
- Medium – Teen to Adult
- Large – Larger Adult
Lav-Headset Specifications:
| Weight | 5gm |
| Dimensions | 100mmH x 140mmW x 200mmD |
| Warranty | 1 year |
RODE Lav-Headset Headset mount for Lavalier Microphones - Medium Size
$ 25.00 - Sold Out
Headset mount for Lavalier Microphones. Compatible with RØDE Lavalier and smartLav+. Medium size.
The Lav-Headset is an innovative and ergonomic headset-style wearable mount that offers increased versatility for users of the RØDE Lavalier and smartLav+ lapel microphones. It allows the microphone to be worn in close proximity to the mouth for optimal audio performance.
Engineered from spring steel that has been plated for lifelong durability, the mount is designed to hold its shape throughout the rigors of repeated use. Integrated cable management at the rear of the mount ensures that the microphone cable is tightly secured and provides strain relief.
The Lav-headset is available in three sizes to comfortably accommodate a range of head sizes. As a general guide the sizes are:
- Junior – Ages up to 13
- Medium – Teen to Adult
- Large – Larger Adult
Lav-Headset Specifications:
| Weight | 5gm |
| Dimensions | 100mmH x 140mmW x 200mmD |
| Warranty | 1 year |
Support
RODE M1 Dynamic Handheld Stage Microphone
$ 99.00 - Sold Out
RODE M1 Dynamic Handheld Stage Microphone
Rode SKU: M1 | Helix SKU: RMM1
Overview
M1 Live performance cardioid dynamic microphone with lifetime warranty
- Live dynamic vocal microphone
- High output neodymium capsule
- Cardioid polar pattern
- Balanced, low impedance output
- Ergonomically designed heavy duty all-metal body
- Low handling noise
- Lifetime warranty when you register your microphone
With rock-solid build quality and a high-power neodymium capsule, the RØDE M1 live dynamic microphone is designed to provide the very best performance, night after night. Its durability is backed-up by a lifetime warranty, following registration of purchase.
The M1's ergonomically designed all-metal body is engineered for maximum comfort when used as a handheld microphone. It feels robust, solid and perfectly balanced without being heavy, and handling noise is almost completely eliminated by the microphone's internal design.
Featuring a warm response that is incredibly defined for a dynamic microphone, the M1's smooth character and defined clarity offer incredible performance as a live vocal microphone. A tightly controlled cardioid polar pattern minimises spill and feedback.
Renowned as one of the industry's best live vocal microphones, the M1 is an equally strong performer on guitar amplifiers as well as kick drum, snare drum, toms and percussion.
Specifications
| Acoustic Principle | Dynamic |
| Polar Pattern | |
| Address Type | End |
| Frequency Range | 75Hz - 18kHz |
| Output Impedance | 320Ω |
| Sensitivity | -56.0dB re 1 Volt/Pascal (1.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Weight | 360.00gm |
| Dimensions | 171.00mmH x 51.50mmW x 51.50mmD |
| Output |  |
| Warranty | 1 year with free extension to lifetime warranty following registration |
RODE M1-S Dynamic Live Performance Lockable Low-Noise Switch
$ 115.00 - Sold Out
RODE M1-S Dynamic Live Performance Lockable Low-Noise Switch
Rode SKU: M1-S | Helix SKU: RMM1S
Overview
M1-S Switchable live performance cardioid dynamic microphone. Fully lockable low-noise switch.
- Live dynamic vocal microphone
- High output neodymium capsule
- Cardioid polar pattern
- Lockable on/off switch
- XLR security lock
- Ergonomically designed heavy duty all-metal body
- Low handling noise
- 10 year extended warranty when you register your microphone
With rock-solid build quality and a high-power neodymium capsule, the RØDE M1-S switchable live dynamic microphone is designed to provide the very best performance, night after night. Its durability is backed-up by a ten year warranty, following registration of purchase.
The M1's ergonomically designed all-metal body is engineered for maximum comfort when used as a handheld microphone. It feels robust, solid and perfectly balanced without being heavy, and handling noise is almost completely eliminated by the microphone's internal design.
Featuring a warm response that is incredibly defined for a dynamic microphone, the M1's smooth character and defined clarity offer incredible performance as a live vocal microphone. A tightly controlled cardioid polar pattern minimises spill and feedback.
The addition of an on/off switch adds versatility for artists, engineers and presenters that prefer control while on stage. A flush-mounted lock ensures the microphone cannot be accidentally switched.
For additional security the M1-S features an XLR lock that can be used to fix the microphone to the cable.
Renowned as one of the industry's best live vocal microphones, the M1 is an equally strong performer on guitar amplifiers as well as kick drum, snare drum, toms and percussion.
Specifications
Rode M2 Handheld Condenser Microphone
$ 179.00 - Sold Out
Rode M2 Handheld Condenser Microphone
Rode SKU: M2 | Helix SKU: RMM2
Overview
The RØDE M2 is a rugged live-performance condenser microphone designed to provide a full frequency response and premium performance on stage. Combining sound quality equal to that of the finest studio microphones, the M2 live performance handheld condenser microphone benefits from RØDE’s extensive experience. With features such as integrated shock mounting to reduce handling noise and a tailored response to reduce feedback, the M2 is a sturdy and versatile addition to your live microphone kit.
Featuring a tailored-for-stage super-cardioid polar pattern and an internally shock mounted 1/2" condenser capsule, the M2 provides a high quality alternative to dynamic microphones for live performance. The addition of an on/off switch adds versatility for artists that prefer greater control over their sound, while a lock ensures that the microphone cannot be accidentally switched.
The RØDE M2 live condenser microphone is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.
- Live condenser vocal microphone
- Feedback rejecting super-cardioid pick up pattern
- Locking on/off switch
- Heavy duty metal body
- High level of RF rejection
- Low handling noise
- RM1 stand mount and ZP1 zip pouch included
Specifications
| Acoustic Principle | Pressure Gradient |
| Active Electronics | JFET impedance converter with bipolar output buffer |
| Capsule | 0.50" |
| Polar Pattern |  |
| Address Type | End |
| Frequency Range | 35Hz - 20kHz |
| Output Impedance | 50Ω |
| Maximum SPL | 141dBSPL |
| Maximum Output Level | 5.2mV (@ 1kHz, 1% THD into 1KΩ load) |
| Sensitivity | -44.0dB re 1 Volt/Pascal (6.30mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 23dBA |
| Power Options |
|
| Weight | 308.00g |
| Dimensions | 187.00mmH x 47.00mmW x 47.00mmD |
| Output | |
| Warranty | 1 year with free extension to 10 years following registration |
RODE M3 Multi-Powered Cardioid Condenser Microphone
$ 149.00 - Sold Out
RODE M3 Multi-Powered Cardioid Condenser Microphone
Rode SKU: M3 | Helix SKU: RMM3
Overview
Studio and location multi-powered cardioid condenser microphone with switchable HPF and PAD.
- Heavy duty metal body
- Internal capsule shock mount
- High level of RF rejection
- On-mic selectable high pass filter @ 80Hz-12dB/Oct (-10 and -20dB PAD)
- Heat-treated high-strength mesh head
- Battery status indicator
- 9V Battery Power and 24 - 48V phantom power
- Includes wind shield, mic clip and zip pouch
- 10 year extended warranty when you register your microphone
The RØDE M3 is a highly versatile end-address condenser microphone, designed to be completely at home in the studio, on stage or on location. It is equally suitable as an instrument microphone for guitars, drums and percussion or even vocals.
Featuring a heavy duty metal body and internally shock mounted 1/2" condenser capsule mounted for end-address, the M3 can be powered either via P48 phantom power, or an internal 9V battery.
A -10dB and -20dB level attenuator (pad), selectable from inside the battery compartment, allows recording of loud sound sources, such as a guitar amplifier or snare drum. A high-pass filter selectable on the microphone power switch introduces a filter at 80Hz to reduce low frequency sounds and handling noise.
The RØDE M3 microphone is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.
Specifications
| Acoustic Principle | Pressure Gradient |
| Active Electronics | JFET impedance converter with bipolar output buffer |
| Capsule | 0.50" |
| Address Type | End |
| Frequency Range | 40Hz - 20kHz(selected HPF @80Hz) |
| Output Impedance | 200Ω |
| Maximum SPL | 142dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Maximum Output Level | 9.2mV |
| Sensitivity | -40.0dB re 1 Volt/Pascal (6.30mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 21dB-A |
| Weight | 390.00gm |
|
Dimensions |
225.00mmH x 33.00mmW x 33.00mmD |
| Warranty |
1 year with free extension to 10 years following registration |
RODE M5 Compact 1/2" Condenser Microphone (Matched Pair)
$ 199.00 - Sold Out
RODE M5 Compact 1/2" Condenser Microphone (Matched Pair)
Rode SKU: M5-MP | Helix SKU: RMM5MP
Overview
Matched pair of compact 1/2" cardioid condenser microphones. Includes 2 x RM5 mic clips and 2 x WS5 windshields
- 1⁄2” capsule with gold-plated membrane
- Cardioid polar pattern
- All metal body
- Ultra-low noise
- State-of-the-art surface mount electronics
- Includes microphone clips and windshields
- 10 year extended warranty when you register your microphone
Designed and made in Australia, the M5 is a compact ½” cardioid condenser microphone with low noise and a full frequency response. A result of many years’ experience building the award-winning NT5 microphone, RØDE has succeeded in making a high-quality ‘pencil’ style permanently polarized condenser that will impress even the most demanding of artists and engineers. Ideal for studio recording and live on stage, the M5 is equally at home on a range of acoustic instruments, choirs, or anywhere you would employ a small diaphragm condenser microphone, either individually or as a stereo array. This matched pair has been carefully selected to ensure a variation of no more than 1dB sensitivity between the microphones. A premium foiled certificate is supplied to verify the authenticity of the pair. The M5 is finished with RØDE’s proprietary ceramic coating which offers a sleek matt black finish, and is supplied with WS5 windshields and RM5 stand mounts.
Specifications
| Acoustic Principle | Pressure Gradient |
| Active Electronics | JFET impedance converter with bipolar output buffer |
| Capsule | 0.50" |
| Polar Pattern | |
| Address Type | End |
| Frequency Range | 20Hz - 20kHz |
| Output Impedance | 200Ω |
| Maximum SPL | 140dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Maximum Output Level | 13.5mV |
| Sensitivity | -34.0dB re 1 Volt/Pascal (20.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 19dB-A |
| Power Options |
|
| Weight | 80.00gm |
| Dimensions | 100.00mmH x 20.00mmW x 20.00mmD |
| Output | |
| Warranty | 1 year with free extension to 10 years following registration |
RODE MiCon Cable 1.2m (4') (Black)
$ 32.00 - Sold Out
The RØDE MiConTM connector system provides seamless integration between the RØDE HS1 headset and Lavalier microphones and a wide range of wireless systems. Like all MiConTM cables, this 1.2m (4') length is heavy-duty, shielded and Kevlar reinforced.
| Weight | 6.00gm |
| Dimensions | 1200.00mmH x 1.50mmW x 1.50mmD |
| Warranty | 1 year |
RODE MiCon Cable 1.2m (4') (Pink)
$ 32.00 - Sold Out
The RØDE MiConTM connector system provides seamless integration between the RØDE HS1 headset and Lavalier microphones and a wide range of wireless systems. Like all MiConTM cables, this 1.2m (4') length is heavy-duty, shielded and Kevlar reinforced.
| Weight | 6.00gm |
| Dimensions | 1200.00mmH x 1.50mmW x 1.50mmD |
| Warranty | 1 year |
RODE MiCon Cable 3m (10') (Black)
$ 39.00 - Sold Out
The RØDE MiConTM connector system provides seamless integration between the RØDE HS1 headset and Lavalier microphones and a wide range of wireless systems. Like all MiConTM cables, this 3m (10) length is heavy-duty, shielded and Kevlar reinforced. Black in colour.
| Weight | 15.00gm |
| Dimensions | 30000.00mmH x 1.50mmW x 1.50mmD |
| Warranty | 1 year |
RODE MiCon-1 Connector for RODE MiCon Microphones (Sennheiser)
$ 18.00
The RØDE MiConTM connector system provides seamless integration between the RØDE HS1 headset,PinMic and Lavalier microphones and a wide range of wireless systems. The MICON-1 is designed to connect to the Sennheiser transmitters SK 500 G3, SK 300 G3, SK 100 G3, SK 500 G2, SK 300 G2, SK 2 Freeport Sennheiser and the Sennheiser products listed are registered names and trademarks owned by Sennheiser.
RODE MiCon-10 Connector for MIPRO Devices
$ 23.00 - Sold Out
The RØDE MiConTM connector system provides seamless integration between the RØDE HS1 headset, PinMic and Lavalier microphones and a wide range of wireless systems. The MICON-10 is designed to connect to MIPRO transmitters with 4-pin mini XLR connector. MIPRO is a registered name and trademark owned by MIPRO Electronics.
| Weight | 10.00gm |
| Dimensions | 36.00mmH x 13.65mmW x 10.40mmD |
| Warranty | 1 year |
RODE MiCon-11 Connector for TRRS Devices & Smartphones
$ 23.00 - Sold Out
The RØDE MiConTM connector system provides seamless integration between the RØDE HS1 headset, PinMic and Lavalier microphones and a wide range of wireless systems. The MICON-11 is designed to connect to TRRS devices such as the iPhone, iPad, iPod touch and select Android devices.
| Weight | 7.00gm |
| Dimensions | 1200.00mmH x 9.00mmW x 9.00mmD |
| Warranty | 1 year |
RODE MiCon-2 Connector for 3.5mm Stereo Mini Jack (1v Min Pwr Supply)
$ 18.00
The RØDE MiConTM connector system provides seamless integration between the RØDE HS1 headset,PinMic and Lavalier microphones and a wide range of wireless systems. The MICON-2 is designed to connect to a standard 3.5mm stereo minijack, with a power supply of 1V minimum.
| Weight | 8.00gm |
| Dimensions | 37.00mmH x 10.00mmW x 10.00mmD |
| Warranty | 1 year |
RODE MiCon-3 Connector for RODE MiCon Microphones (Shure)
$ 23.00 - Sold Out
The RØDE MiConTM connector system provides seamless integration between the RØDE HS1 headset,PinMic and Lavalier microphones and a wide range of wireless systems. The MICON-3 is designed to connect to Shure transmitters UR1, UR1M, ULX1, SLX1, PGX1 and PG1. Shure and the Shure products listed are registered names and trademarks owned by Shure.
| Weight | 10.00gm |
| Dimensions | 36.00mmH x 13.65mmW x 10.40mmD |
| Warranty | 1 year |
RODE MiCon-4 Connector for RODE MiCon Microphones (Audio-Technica)
$ 27.00 - Sold Out
The RØDE MiConTM connector system provides seamless integration between the RØDE HS1 headset,PinMic and Lavalier microphones and a wide range of wireless systems. The MiCon-4 is designed to connect to Audio Technica UniPakTM Body-Pack transmitters 1800, 2000 and 3000. Audio Technica, Uni-Pak and the Audio Technica products listed are registered names and trademarks owned by Audio Technica.
| Weight | 13.00gm |
| Dimensions | 36.00mmH x 11.60mmW x 11.60mmD |
| Warranty | 1 year |
RODE MiCon-5 Connector for 3-pin XLR Devices
$ 11.99 - Sold Out
RODE MiCon-5 Connector for 3-pin XLR Devices
RODE MiCon-5 Connector for RODE MiCon Microphones (XLR)
$ 27.00 - Sold Out
The RØDE MiConTM connector system provides seamless integration between the RØDE HS1 headset,PinMic and Lavalier microphones and a wide range of wireless systems. The MiCon-5 is designed to connect to a standard 3 pin XLR, with P48 phantom power.
| Weight | 50.00gm |
| Dimensions | 61.80mmH x 30.10mmW x 21.00mmD |
| Warranty | 1 year |
RODE MiCon-6 Connector for AKG PT40, PT60, PT61, PT80, PT400, PT2000, PT4000 and Audix RAD-360
$ 23.00 - Sold Out
The RØDE MiConTM connector system provides seamless integration between the RØDE HS1 headset,PinMic and Lavalier microphones and a wide range of wireless systems. The MICON-6 is designed to connect to AKG transmitters PT40, PT60, PT61, PT80, PT400, PT2000 and PT4000, as well as the Audix RAD-360. AKG, Audix and the AKG and Audix products listed are registered names and trademarks of their respective owners.
| Weight | 10.00gm |
| Dimensions | 36.00mmH x 13.00mmW x 10.50mmD |
| Warranty | 1 year |
RODE MiCon-7 Connector for RODE MiCon Microphones (Lectrosonics)
$ 23.00 - Sold Out
The RØDE MiConTM connector system provides seamless integration between the RØDE HS1 headset,PinMic and Lavalier microphones and a wide range of wireless systems. The MICON-7 is designed to connect to Lectrosonics transmitters SM Series, UMa Series, LMa Series and UM450. Lectrosonics and the Lectrosonics products listed are registered names and trademarks owned by Lectrosonics Inc.
| Weight | 10.00gm |
| Dimensions | 36.00mmH x 13.00mmW x 10.50mmD |
| Warranty | 1 year |
RODE MiCon-8 Connector for RODE MiCon Microphones (Sony UWP)
$ 18.00 - Sold Out
The RØDE MiConTM connector system provides seamless integration between the RØDE HS1 headset, PinMic and Lavalier microphones and a wide range of wireless systems. The MICON-8 is designed to connect to Sony UWP transmitters. Sony and the Sony products listed are registered names and trademarks owned by Sony Corp.
| Weight | 10.00gm |
| Dimensions | 39.00mmH x 10.00mmW x 10.00mmD |
| Warranty | 1 year |
RODE MiCon-9 Adapter Cable for Sennheiser SK500/2000/5000
$ 60.00 - Sold Out
The RØDE MiConTM connector system provides seamless integration between the RØDE HS1 headset,PinMic and Lavalier microphones and a wide range of wireless systems. The MICON-9 is designed to connect to the Sennheiser transmitters SK 2000 and SK 5000 Sennheiser and the Sennheiser products listed are registered names and trademarks owned by Sennheiser.
| Weight | 10.00gm |
| Dimensions | 1200.00mmH x 9.00mmW x 9.00mmD |
| Warranty | 1 year |
RODE Micro Boompole - 3-Section Boom Pole
$ 49.00 - Sold Out
- Precision balanced anodized aluminium construction
- New intuitive lock/release system
- Ergonomic grip handle
The RØDE Micro Boompole provides ultimate boom pole performance in a convenient and portable size. Intuitive twist locks allow the Micro Boompole’s three sections to smoothly extend to 2063mm (6¾’), while the ergonomic grip provides comfort during use.
| Weight | 396.00gm |
| Dimensions | 844.00mmH x 33.00mmW x 33.00mmD |
| Warranty | 1 year |
RODE Micro Boompole Pro MicroBoompolePRO
$ 99.00 - Sold Out
RODE Micro Boompole Pro MicroBoompolePRO
The new Boompole Pro is RØDE’s flagship professional offering in its boompole range. Made completely from carbon fibre it is incredibly lightweight (535gm) yet rigid, strong and ultra quiet, and extends from a compact 810mm out to 3m. Each of the pole’s five sections can be easily extended or contracted using an intuitive twist-locking mechanism.
F e a t u r e s:
• 100% carbon fibre construction
• Ultra lightweight - only 125gm (4.5oz) fully extended
• Unique modular design - three sections can be connected as required to
provide up to 2.2m (7’2”) reach
Ultra-light carbon fibre boompole
Specifications:
Dimensions 2.2m (3 x 735mm sections) x 10mmØ
Weight: 125gm (at full length)
Thread 3/8”
RODE Microphones Blimp Extension Kit for NTG8 & Other Long Shotguns w/Barrel up to 600mm Microphones
$ 69.00 - Sold Out
The Blimp Extension is an add-on component kit for the original RØDE Blimp windshield system that allows the use of long shotgun microphones, including the RØDE NTG8 and any shotgun with barrel length of up to 600mm. The kit includes a 256mm blimp extension piece, two sets of rigid silicone bands, extra long DeadWombat fur windshield and furry brush. Please note that the original RØDE Blimp is required to use this product. It is not currently compatible with the 2014 RØDE Blimp.
| Weight | 125.00gm |
| Dimensions | 122.00mmH x 265.00mmW x 122.00mmD |
| Warranty | 1 year |
RODE Microphones Minifur-LAV Artificial Fur Wind Shield for Lavalier Microphone
$ 24.99 - Sold Out
The MINIFUR-LAV is a synthetic fur cover for the Lavalier microphone, designed for use in outdoor or high-wind conditions.The MINIFUR-LAV is supplied in a pack of three.
| Weight | 1.00gm |
| Dimensions | 26.00mmH x 44.00mmW x 44.00mmD |
| Warranty | 1 year |
RODE Microphones RC5 Case for the NT5 Or NT55 Microphones with Accessories
$ 39.00 - Sold Out
A sturdy flight case designed to house a matched pair of NT5 or NT55 microphones with stand mounts and windshields
| Weight | 880.00gm |
| Dimensions | 300.00mmH x 350.00mmW x 100.00mmD |
| Warranty | 1 year |
RODE Microphones RM1 Stand Mount for S1, M2 Microphones (Replacement)
$ 14.99 - Sold Out
The RM1 mic clip effectively secures your microphone to its stand without interfering with its polarity or frequency response. Includes 3/8-5/8" adaptor.
| Weight | 92.00gm |
| Dimensions | 95.00mmH x 40.00mmW x 65.00mmD |
| Warranty | 1 year |
RODE Microphones SC2 3.5mm TRS Patch Cable
$ 15.00 - Sold Out
RODE Microphones SC2 3.5mm TRS Patch Cable
The SC2 is a high-quality shielded 3.5mm TRS patch cable. The cable extends from 170mm to up to 400mm, and features right-angle connectors for ergonomic use. It is ideal for connecting the output of an Apple iPhone using a RØDE i-XY microphone to a DSLR or video camera for capturing scratch audio to camera while the iPhone records the broadcast-quality track.
| Weight | 20.00gm |
| Dimensions | 30.00mmH x 10.00mmW x 170.00mmD |
| Warranty | 1 year |
RODE Microphones ZP2 Zip Pouch for NTG-2 Microphones
$ 12.99 - Sold Out
RODE Microphones ZP2 Zip Pouch for NTG-2 Microphones
Rode Mini Boompole Microphone Boom Arm
$ 129.00 - Sold Out
A lightweight, high grade professional boom pole, the Mini Boompole allows you to mount your microphone securely. Plus you can swivel it in a range of directions that will allow you to easily change positions and follow your sound source. The Mini Boompole extends from 0.84m (33 inches) to 2.05m (81 inches).
- Lightweight aluminium construction
- New ultra smooth extension and retraction system
- Easy to use locking mechanism
- Precision balanced
- Compatible microphones : NTG1, NTG2, NTG3, NT4, NT5, NT55, M3
| Weight | 580.00gm |
| Dimensions | 2100.00mmH x 32.00mmW x 32.00mmD |
| Warranty | 1 year |
