RODE RM5 Stand Mount for the NT5 Microphone
$ 14.99 - Sold Out
RODE RM5 Stand Mount for the NT5 Microphone
- Externally biased condenser
- Gold sputtered 1/2” capsule
- Heavy-duty satin-nickel plated body
- Dual power operation
- Surface mount circuitry
- Low noise
- Full frequency response
- Available as Certified Match Pair
- 10 year extended warranty when you register your microphone
The NT5 is RØDE's premier small-diaphragm cardioid condenser microphone, sometimes referred to as a 'pencil mic'.
Intended for recording acoustic instruments, drum overheads, cymbals and live performances, the compact externally polarized mic employs a 1/2" capsule, an active J-FET impedance converter with bipolar output buffer.
Its tight cardioid pickup pattern also makes it ideal for use as an indoor dialogue microphone for filmmaking on a mic stand or boom.
Expanding the NT5's versatility, an interchangeable omnidirectional capsule (NT45-O) is available.
Finished in durable satin nickel, the NT5 available as a single microphone or as an acoustically matched pair.
The NT5 is designed and made in Australia, and covered by RØDE's industry leading 10 year warranty.
| Acoustic Principle | Pressure Gradient |
| Active Electronics | JFET impedance converter with bipolar output buffer |
| Capsule | 0.50" |
| Polar Pattern |  |
| Address Type | End |
| Frequency Range | 20Hz - 20kHz |
| Output Impedance | 100Ω |
| Maximum SPL | 143dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Maximum Output Level | 13.9mV |
| Sensitivity | -38.0dB re 1 Volt/Pascal (12.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 16dB-A |
| Power Options |
 
|
| Weight | 101.00gm |
| Dimensions | 118.00mmH x 20.00mmW x 20.00mmD |
| Output |  |
| Warranty | 1 year with free extension to 10 years following registration |
RODE SC1 TRRS Extension Cable For SmartLav Microphone - 20'
$ 25.00 - Sold Out
RODE SC1 TRRS Extension Cable For SmartLav Microphone - 20'
The SC1 is a premium shielded extension cable for the smartLav and smartLav+ TRRS microphones. Measuring 6m/20', the SC1 features gold plated contacts for superior audio reproduction.
| Weight | 75gm |
| Dimensions | 6000mmH x 3mmW x 3mmD |
| Warranty | 1 year |
RODE SC3 3.5mm TRRS to TRS Adaptor for smartLav
$ 15.00 - Sold Out
RODE SC3 3.5mm TRRS to TRS Adaptor for smartLav
The SC3 is a high-quality shielded adaptor, designed to allow the smartLav to connect to 3.5mm TRS devices such as cameras and audio recorders. The gold-plated contacts are colour coded, with grey indicating the TRRS input.
| Weight | 20.00gm |
| Dimensions | 30.00mmH x 10.00mmW x 170.00mmD |
| Warranty | 1 year |
RODE SC4 3.5mm TRS to TRRS Adaptor
$ 15.00 - Sold Out
RODE SC4 3.5mm TRS to TRRS Adaptor
The SC4 3.5mm TRS to TRRS Adaptor from Rode is designed to let you connect a microphone with a 3.5mm output, such as the Rode VideoMic, to smart devices with a 3.5mm TRRS input. It features color coded, gold-plated connectors, with gray indicating the TRRS connector, in addition to shielded construction. The SC4 is compatible with stereo microphones and combines left and right channels to a mono signal for TRRS compatibility.
| Weight | 20.00gm |
| Dimensions | 30.00mmH x 10.00mmW x 170.00mmD |
| Warranty | 1 year |
RODE SC6 Dual TRRS Input and Headphone Output for Smartphones
$ 19.95
RODE SC6 Dual TRRS Input and Headphone Output for Smartphones
The SC6 is an input/output breakout box for smartphones and tablets. With two TRRS inputs and one stereo headphone output, the unit connects to any TRRS device and allows the use of one or two smartLav microphones as well as headphones for monitoring and playback. With the SC6 users can monitor audio from the smartLav, as well as input two smartLavs into the one mono channel in interview or dual-dialogue scenarios. (Note that the two microphone inputs will be recorded to the same channel)
| Weight | 50.00gm |
| Dimensions | 50.00mmH x 50.00mmW x 50.00mmD |
| Warranty | 1 year |
RODE SC7 3.5mm TRS to TRRS Patch Cable
$ 15.00 - Sold Out
RODE SC7 3.5mm TRS to TRRS Patch Cable
The SC7 is a high-quality shielded patch cable, designed to allow the VideoMic GO and VideoMicro to connect to TRRS compatible devices such as the iPhone or iPad. The gold-plated contacts are colour coded, with grey indicating the TRRS output. The cable is colour matched to the red TRS to TRS cable that is supplied with the VideoMic GO and VideoMicro, and is easily fitted by inserting the TRS (black) jack into the rear of the microphone and the TRRS end (grey) into the smartphone or tablet.
| Weight | 20.00gm |
| Dimensions | 30.00mmH x 10.00mmW x 170.00mmD |
| Warranty | 1 year |
Rode SC8 6m/20' Dual Male 3.5mm TRS Cable SC8
$ 30.00 - Sold Out
RODE SC8 Dual-Male 1/8" TRS Cable(20') SC8
The SC8 Dual-Male TRS Cable from Rode is a shielded extension cable for use with the VideoMicro and VideoMic GO microphones (sold separately). It features gold-plated contacts for better audio reproduction and measures 20' in length and has a 1/8" TRS mini-jack connector on one end and a right angle 1/8" TRS mini-jack connector on the other.
RODE Set of Eight Coloured XLR Rings
$ 10.00 - Sold Out
RODE Set of Eight Coloured XLR Rings
Rode SKU: XLR-ID | Helix SKU: RMXLRID
Overview
The XLR-ID is a set of eight colour-coded rings that can be affixed to any XLR plug, making them easier to identify and keep organised. The colours of the rings match the colours used for each of the microphone channels on the RØDECaster Pro.
- For RODECaster Pro
- Keep Track of Your XLR Cable
- Color-Coded Rings for XLR Connections
- 2 Green, Orange, Blue & Pink Rings
Specifications:
Dimensions: 0.4 x 0.3 x 0.7" / 1.0 x 0.8 x 1.9 cm
RODE Set of Four 3.5mm to 1/4 inch TRS Headphone Adaptors
$ 15.00 - Sold Out
RODE Set of Four 3.5mm to 1/4 inch TRS Headphone Adaptors
Rode SKU: HJA-4 | Helix SKU: RMHJA4
Overview
The HJA-4 is a pack of four high-quality adaptors for converting headphones with 3.5mm plugs (as used on most consumer models) for use with the RØDECaster Pro’s ¼-inch headphone outputs.
- 4 x 3.5mm to 1/4" Headphone Adapters
- Use Consumer Headphones with Pro Gear
- For RODECaster Pro
- For AI-1
Specifications:
Dimensions: 1.77 x 0.39 x 0.39" / 45 x 10 x 10 mm
RODE Shock mount for NTG8 Microphone
$ 49.95 - Sold Out
RODE Shock mount for NTG8 Microphone
The SM8 is a specially designed shockmount engineered to provide excellent handling noise isolation, cable management and versatile mounting options for the RØDE NTG8 long shotgun microphone. The unique mounting system ensures the microphone is balanced despite its size.
| Dimensions | 151.00mmH x 65.00mmW x 117.00mmD |
| Warranty | 1 year |
RODE SM2 Elastic Suspension Microphone Shock Mount
$ 49.00 - Sold Out
RODE SM2 Elastic Suspension Microphone Shock Mount
The SM2 is a suspension shock mount that holds a range of large diaphragm condenser microphones. It provides isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. Additionally the SM2 allows for flexible mounting to position your microphone perfectly in any situation.
| Weight | 230.00gm |
| Dimensions | 100.00mmH x 150.00mmW x 210.00mmD |
| Warranty | 1 year |
Rode SM3 Shock Mount For Rode Shotguns and NT5
$ 49.95 - Sold Out
RODE SM3 Shock Mount For Rode Shotguns and NT5
The SM3 is a suspension shock mount with Hot-Shoe adaptor for mounting the RØDE NTG1, NTG2, NTG3, NT3, NT4 & NT5 microphones on video cameras.
This allows you to connect your RØDE Microphone to a number of video cameras on the market while giving your camera maximum isolation from any handling vibrations.
NT3, NT4, NT5, NT55, NTG1, NTG2
RODE SM4 Shotgun Microphone Shock Mount
$ 49.95 - Sold Out
RODE SM4 Shotgun Microphone Shock Mount
The SM4 suspension shock mount gives you the ability to isolate the microphone from external physical factors that may cause unwanted rumble and vibrations in the microphone. The SM4 attaches to any 3/8" or 5/8" threaded microphone stand.
| Weight | 124.00gm |
| Dimensions | 118.00mmH x 60.00mmW x 75.00mmD |
| Warranty | 1 year |
Rode SM4-R Rycote Lyre Shock Mount
$ 49.00 - Sold Out
RØDE SM4-R Rycote Lyre Shock Mount
RØDE SKU: SM4-R | Helix SKU: RMSM4R
Overview
The SM4-R is a suspension shock mount for mounting various RØDE microphones onto a mic stand or boompole with 3/8" or 5/8" thread.
The SM4-R is equipped with dual Rycote Lyre mounts to ensure maximum isolation from any handling vibrations, four possible mounting points to suit the complete range of compatible RØDE shotgun microphones, and integrated cable management clip.
The stand mount is angle adjustable and can be locked into position to ensure sturdy and reliable mic positioning.
Specifications
| Weight | 110g |
| Dimensions | 110mmH x 35mmW x 117mmD |
| Warranty | 1 year |
RODE SM5 - Shotgun Microphone Suspension
$ 49.95 - Sold Out
RODE SM5 - Shotgun Microphone Suspension
The SM5 is a suspension shock mount with ring clamp adaptor that allows the use of RØDE Microphones to be used with professional video cameras. It supports camera clamp mounts that effectively grip a 24 or 27mm barrel. Most cameras feature rubber pads inside the ring clamp to allow for some tolerance in barrel size. The design of the suspension shock mount means the microphone is physically isolated from the stand ensuring that there is no unwanted rumble or vibrations in your recording. 1/4" and 3/8" threads at the base of the mount allow for easy attachment to a boompole or other accessories.
| Weight | 105.00gm |
| Dimensions | 94.00mmH x 60.00mmW x 130.00mmD |
| Warranty | 1 year |
RODE SM6 Shock Mount with Detachable Pop Filter
$ 59.00
RODE SM6 Shock Mount with Detachable Pop Filter
The SM6 is a high quality suspension shock mount that supports many large diaphragm RØDE microphones. It provides isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. It includes a removable pop shield with two axes of adjustment and a telescopic arm for ultimate application versatility.
| Weight | 682.00gm |
| Dimensions | 210.00mmH x 133.00mmW x 210.00mmD |
| Warranty | 1 year |
RODE smartLav+ Lavalier Condenser Microphone for Smartphones
$ 79.00 - Sold Out
RODE smartLav+ Lavalier Condenser Microphone for Smartphones
Rode SKU: amart Lav+ | Helix SKU: RMsmartLavP
Overview
- Broadcast quality, professional-grade Lavalier Mic with TRRS Jack
- High-quality omni-directional condenser capsule
- Discrete 4.5mm miniature microphone
- Compatible with iOS devices and select Android devices*
- Kevlar® reinforced cable
- Includes wind shield and durable mounting clip
- Twelve month warranty
The smartLav+ is a broadcast-grade wearable microphone designed for use in a wide range of film, television and broadcast scenarios, or wherever broadcast quality audio is required in a discreet, portable format without the complication and expense of additional wireless equipment.
With the smartLav+ the user simply mounts the microphone on the talent, connects it to a smartphone or tablet headset jack and records via the RØDE Rec app for iOS, or any other audio app of their choice.
By employing a professional quality omni-directional condenser capsule the smartLav+ picks up sound equally from all around the microphone, allowing for versatility when mounting and ensuring a high degree of user-friendly operation.
A foam pop shield is supplied to minimise wind noise and vocal plosives (hard ‘b’, ‘t’ and ‘p’ sounds), as well as a durable mounting clip with in-built cable management. Its Kevlar® reinforced cable ensures that you never stretch or snap your microphone under normal usage conditions.
The smartLav+ is compatible with any audio app that accepts input from the headset connection, however it has been designed to pair perfectly with RØDE’s RØDE Rec app for Apple iOS devices. RØDE Rec turns the user’s iOS device into a fully-featured field recorder, with a wide range of equalisation presets to suit various recording situations, in addition to professional editing functions and the ability to publish to SoundCloud and Dropbox direct from the app.
Specifications
| Acoustic Principle | Permanently Polarise |
| Active Electronics | JFET |
| Capsule | 0.10" |
| Polar Pattern |  |
| Address Type | End |
| Frequency Range | 60Hz - 18kHz |
| Output Impedance | 3Ω |
| Maximum SPL | 110dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Maximum Output Level | 189.0mV |
| Sensitivity | -35.0dB re 1 Volt/Pascal (17.80mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 27dB-A |
| Weight | 6.00gm |
| Dimensions | 1180.00mmH x 4.50mmW x 4.50mmD |
| Output |  |
| Warranty | 1 year |
What's in the Box
|
smartLav+ Lavalier microphone for smartphones |
 |
LAV-CLIP Microphone Mounting Clip |
 |
WS-LAV Pop Filter/Wind Shield |
RODE SMR Microphone Stand
$ 79.00 - Sold Out
RODE SMR Microphone Stand
- Premium shock mount for most RØDE large diaphragm condenser microphones
- Unique double Rycote Lyre suspension system for maximum isolation
- Removable and washable all metal pop filter
- Improved clamping system for increased friction and weight handling
- Engineering grade reinforced polymer construction
- Built in cable management clip
- Locking base nut to suit RØDE large diaphragm condenser microphones included
The SMR is a revolutionary shock mount for large diaphragm condenser microphones from RØDE. Featuring a unique double-Lyre suspension system, the SMR enhances the existing superior vibration cancellation of Rycote’s Lyre system by using a smaller inner Lyre to act as a tensioning element. This maintains each Lyre in the neutral position where it is most efficient at cancelling vibration. The SMR's removable all-metal pop filter is as effective as it is visually striking, providing an integrated solution for plosive protection that is easily washable and designed to last as long as the shock mount and microphone. The clamping system of the SMR utilises a greater surface area for increased friction and weight handling, without the need for over-tightening of the locking thread. With the load distributed over a greater surface area, the clamping system is virtually immune to the wear and tear of repeated use. The SMR's frame is constructed from an engineering grade reinforced polymer, typically only seen in high-load applications such as safety equipment, automotive components, and military artillery. Vibration force is evenly distributed around the outer frame via the wide mounting rails, increasing the effectiveness of the Lyre system. Efficient and well-considered cable-management completes the package. A base nut is also included, suitable for all compatible RØDE microphones.
| Weight | 260.00gm |
| Dimensions | 130.00mmH x 220.00mmW x 210.00mmD |
| Warranty | 1 year |
RODE Stand Mount for NT3, 4, and Other Condenser Microphones
$ 14.99 - Sold Out
RODE Stand Mount for NT3, 4, and Other Condenser Microphones
The RM3 mic clip effectively secures your microphone to its stand without interfering with its polarity or frequency response. Using RØDE stand mounts ensures that your microphones performance is not interfered with. Inferior stand mounts may interfere with the pick up patterns and frequency response of a number of microphones as they are not designed to exact specifications.
| Weight | 107.00gm |
| Dimensions | 94.00mmH x 35.00mmW x 64.00mmD |
| Warranty | 1 year |
RODE Stereo VideoMic Bag
$ 14.99 - Sold Out
RODE Stereo VideoMic Bag
Designed to carry the Stereo VideoMic along with spare batteries, shock mount bands and other small accessories. Features an adjustable and removable strap, belt loops, and is made from durable neoprene
RODE Stereo VideoMic Camera-Mounted Stereo Microphone
$ 249.00 - Sold Out
RODE Stereo VideoMic Camera-Mounted Stereo Microphone
Rode SKU: Stereo VideoMic | Helix SKU: RMStereoVideoMic
Overview
The RØDE Stereo VideoMic is a high-quality stereo microphone designed for use with camcorders, DSLR cameras and portable audio recorders.
Two high-resolution 1/2" condenser capsules are mounted in a fixed X/Y stereo array, providing a very natural stereo recording, while still offering a high level of rear rejection.
The Stereo VideoMic is an ideal microphone for capturing environmental and ambient sounds, as well as live music. For dialogue and directional applications the RØDE VideoMic and VideoMic Pro are recommended.
An in-built shock mounting system isolates the Stereo VideoMic capsule and electronics from its mount, providing isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone.
Its standard sized shoe mount also includes a 3/8" thread in the base for easy mounting on a boom pole or stand.
In addition to the microphone's native 40Hz-20kHz response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.
A -10dB level attenuation (or PAD), selectable from the rear face of the microphone, allows recording of loud sound sources, such as live music or motorsport.
The RØDE Stereo VideoMic stereo on-camera microphone is designed in Australia and covered by RØDE Microphones' industry leading 10 year warranty.
Specifications
| Acoustic Principle | Pressure Gradient |
| Active Electronics | JFET impedance converter |
| Capsule | 0.50" |
| Polar Pattern |
Paired cardioid capsules in X-Y stereo pattern
|
| Address Type | End |
| Frequency Range | 40Hz - 20kHz |
| Output Impedance | 200Ω |
| Maximum SPL | 134dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Sensitivity | -38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 20dB-A |
| Power Options |  |
| Weight | 288.00gm |
| Dimensions | 65.00mmH x 102.00mmW x 170.00mmD |
| Output |  |
| Warranty | 1 year with free extension to 10 years following registration |
Rode Stereo VideoMic Pro Rycote
$ 299.00 - Sold Out
Rode Stereo VideoMic Pro Rycote
Rode SKU: Stereo Video Mic Pro-R | Helix SKU: RMStereoVideoMicProR
Overview
- Rycote® Lyre® shock mounting onboard
- Broadcast recording quality on-camera microphone
- All new matched pair 1⁄2” condenser capsules in XY stereo configuration
- Improved foam windscreen
- Ultra lightweight, compact form factor
- On mic power and EQ controls
- Two step High Pass Filter (flat, 75Hz)
- Three position level control (-10dB, 0, +20dB)
- 9V battery powered - over 100 hours use (alkaline)
- New Kevlar reinforced braided cable
- Billeted metal camera shoe mount with 3/8” thread for easy boompole mounting
- 10 year extended warranty when you register your microphone
The new Stereo VideoMic Pro provides a high quality stereo option for videographers, and is ideal for recording music, and the atmospheric ambience essential in building a realistic audio scene.
Based around the all new capsule with its matched pair of high sensitivity ½”cardioid condensers in a coincident XY pair, the Stereo VideoMic Pro provides a wide stereo image with natural depth.
Another new addition is the integrated Rycote® Lyre® based shock mounting system, which separates the Stereo VideoMic Pro capsule and electronics from its mount, providing isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. Constructed from a single piece of hard-wearing thermoplastic, the Lyre® provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap.
The Stereo VideoMic Pro, with its ergonomic form factor, make it perfectly suited to DSLR, consumer camcorders and large-sensor video cameras. The newly designed Kevlar reinforced braided cable, as well as the improved foam windscreen, provides excellent acoustic decoupling from the camera and offers significantly lower noise transference and higher sensitivity.
The user friendly designed rear of the microphone body features the power and equalisation controls, including a high pass filter at 75Hz which is designed to cut out the noise generated by air conditioning, traffic and other undesirable low frequency interference.
A -10dB PAD allows the user to reduce the sensitivity of the microphone, making it suitable for recording loud sound sources such as live music or at sporting events.
Like the VideoMic Pro, the Stereo VideoMic Pro features a +20dB level boost specifically designed to provide a higher quality signal with DSLR cameras. When activated, the typically low quality camera preamp level can be reduced, resulting in a lower noise floor and much clearer recording.
The RØDE Stereo VideoMic Pro is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.
Specifications
| Acoustic Principle | Pressure Gradient |
| Active Electronics | JFET impedance converter |
| Capsule | 0.50" |
| Address Type | End |
| Frequency Range | 40Hz - 20kHz |
| Output Impedance | 200Ω |
| Maximum SPL | 134dBSPL |
| Sensitivity | -38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 18dBA |
| Weight | 116g |
| Dimensions | 134mmH x 80mmW x 115mmD |
| Warranty | 1 year with free extension to 10 years following registration |
RODE Stereo VideoMic X
$ 599.00 - Sold Out
RODE Stereo VideoMic X
Rode SKU: SVMX | Helix SKU: RMSVMX
Overview
- Acoustically matched true condenser capsules
- Rycote® Lyre onboard shock mounting
- Balanced professional XLR output
- Heavy-duty, lightweight aluminium construction
- High Pass Filter
- 9V or Phantom Power (P48 - via miniXLR)
- Level adjustment
- High Frequency Boost
- Includes SC2 TRS cable, pop shield and wind shield
- 10 year extended warranty when you register your microphone
The Stereo VideoMic X is the ultimate broadcast-grade stereo microphone for on-camera use. Utilising all-metal construction, it is incredibly robust making it ideal for regular professional use, while also providing high levels of resistance to RF interference. The mic features a matched pair of ½” true-condenser capsules, configured in a stacked X-Y configuration, providing a highly-immersive soundscape. Each capsule is supported by the Rycote® Lyre® shock-mounting system, providing isolation from vibration as well as knocks and bumps. Digital switching on the rear of the SVMX allows the user to control the level adjustment (-10dB or +20dB), high-pass filter (0/75/150Hz) and an innovative high-frequency boost (+6dB @ XHz) designed to boost the intelligibility of dialogue. In a first for the VideoMic range, professional-grade balanced outputs are available on the side of the body, in addition to the RF shielded 3.5mm stereo output cable. An outer dome structure provides physical protection for the sensitive capsules, while reducing wind noise in the same manner as RØDE’s RedDot-winning Blimp.
Specifications
| Acoustic Principle | Pressure Gradient |
| Active Electronics | JFET impedance converter |
| Capsule | 0.50" |
| Polar Pattern | |
| Address Type | End |
| Frequency Range | 40Hz - 20kHz |
| Output Impedance | 200Ω |
| Maximum SPL | 143dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Sensitivity | -32.0dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 12dB-A |
| Power Options |
|
| Weight | 300gm |
| Dimensions | 102mmH x 118mmW x 100mmD |
| Output |
|
| Warranty | 1 year with free extension to 10 years following registration |
RODE Tripod Mini Stand
$ 24.99 - Sold Out
A collapsible mini tripod designedfor mounting lightweight microphones that support 1/4" mounting. The tripod allows you to mount the microphone on any surface that will give you a concentrated and centralized location for picking up sound. It provides 360 degree rotation and a wide angle of vertical adjustment.
| Weight | 185.00gm |
| Dimensions | 195.00mmH x 175.00mmW x 175.00mmD |
| Warranty | 1 year |
RODE Universal Blimp Mount Adapter for RODE Blimp
$ 12.99 - Sold Out
The RØDE Universal Blimp Mount is an interchangeable mounting adaptor for the RØDE Blimp windshield shock mounting system that allows simple and lightweight mounting onto a boom pole, boom stand or any other 3/8" thread mounting device.
| Weight | 60.00gm |
| Dimensions | 65.00mmH x 95.00mmW x 45.00mmD |
| Warranty | 1 year |
RODE Vampire Clip Double-Toothed Clothing Pin
$ 10.99 - Sold Out
The RØDE Vampire Clip is a double-toothed clothing pin that conveniently fastens the RØDE Lavalier microphone onto a wide range of fabric and clothing for complete mounting versatility.
| Weight | 1.00gm |
| Dimensions | 16.00mmH x 7.00mmW x 12.00mmD |
| Warranty | 1 year |
Rode VC1 10' (3.5mm) Stereo Mini Jack Extension Cable, Suits VideoMic
$ 12.99 - Sold Out
RODE VC1 Minijack 3.5mm Stereo Extension Cable
The RODE VC1 Minijack 3.5mm Stereo Extension Cable is ideal for use to connect a RODE VideoMic, Stereo VideoMic or VideoMic Pro when the microphone is mounted on a boompole, or away from the camera or recorder. The VC1 is a 10 foot (3m) 3.5 mm stereo audio extension cable, featuring two core shielding and a gold plated jack and socket. It can also be used as a high-quality headphone extension cable.
Specifications
- Weight: 52.00 grams
- Dimensions (H x W x D): 3000 x 3 x 3 mm
Rode VideoMic Directional Video Condenser Microphone w/Mount
$ 149.00 - Sold Out
The RODE VideoMic Direction Video Condenser Microphone is a professional-grade shotgun microphone. Based on the latest Film industry technology, the VideoMic is designed specifically for use with high quality digital video cameras. The microphone exhibits low noise and an unusually wide bandwidth for its size. It is ultra lightweight, yet rugged due to it's ABS construction. The VideoMic is powered by a standard 9 V battery and offers a low battery LED status indicator and a switchable high pass filter to reduce unwanted low frequency rumble. The VideoMic attaches to any camcorder that has the standard camera-shoe fitting and utilizes a stereo mini jack for audio output. RODE VideoMic Shotgun Microphone Features Broadcast and studio sound quality Rugged reinforced ABS construction two step high-pass filter - flat or 80 Hz integrated shock mount 9 V battery operation condenser transducer low noise circuitry low handling noise includes windscreen integrated camera-shoe mount
RODE VideoMic Pro with Rycote Lyre Suspension Mount
$ 249.00 $ 229.00 - Sold Out
RODE VideoMic Pro with Rycote Lyre Suspension Mount
The RØDE VideoMic Pro is a true shotgun microphone designed for use with camcorders, DSLR cameras and portable audio recorders as a source of primary and reference audio.
At the heart of the VideoMic Pro is an all-new 1/2" condenser capsule that provides broadcast-quality audio via a 3.5mm minijack connector (outputting the mono signal to both left and right channels) with an incredibly low self-noise of just 14db. A super-cardioid polar pattern ensures that surrounding audio is minimised, and your recording is focused on the subject in front of the camera.
The integrated Rycote® Lyre® based shock mounting system separates the VideoMic Pro capsule and electronics from its mount, providing isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. Constructed from a single piece of hard-wearing thermoplastic, the Lyre® provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap.
Easily accessible on the rear face of the microphone are the power, filter and level controls. In addition to the microphone's native 40Hz-20kHz response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.
Below these controls are the level settings, which attenuate or boost the recorded level as required. The -10dB level attenuation (or PAD) is ideal for recording loud sound sources, such as live music, motorsport, or interviews where the subject is very close to the camera. The +20dB level boost is designed for use with DSLR cameras, allowing the user to reduce the camera's preamp level (or mic-input level), effectively reducing the amount of noise generated by the camera's comparatively low quality audio circuitry.
The microphone uses a standard sized shoe mount for on camera use, and features a 3/8" thread in the base of the mount for easy boom pole mounting.
The VideoMic pro is battery powered, and provides over 70 hours recording from a single 9V battery.
The RØDE VideoMic is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.
- Rycote® Lyre® shock mounting onboard
- All-new capsule with lower noise and higher sensitivity
- Broadcast recording quality condenser microphone
- Compact form factor (150mm/6” length)
- Ultra lightweight (85g/3oz)
- 9V battery powered - over 70 hours use (alkaline)
- Integrated shock mounting
- Integrated foam windscreen
- 3.5mm stereo mini-jack output (dual mono)
- Two step High Pass Filter (flat, 80Hz)
- Three position level control (-10dB, 0, +20dB)
- Camera shoe mount with 3/8” thread for easy boompole mounting
- 10 year extended warranty when you register your microphone
Rode VideoMicro Compact On-Camera Microphone VideoMicro
$ 59.00 - Sold Out
Rode VideoMicro Compact On-Camera Microphone
RODE SKU: VideoMicro | Helix SKU: RMVideoMicro
Overview
- Compact size and lightweight - only 80mm (3’) long and 42gm (1.5oz)
- All-metal microphone body
- No battery required (powered by camera plug-in power - min 3V)
- Rycote® Lyre® shock mount included
- Deluxe furry windshield included
- Designed and manufactured in Australia
- Two year extended warranty when you register your microphone
The VideoMicro is a compact microphone designed to improve the audio quality of your videos. It incorporates a high-quality cardioid condenser microphone capsule for great quality audio recordings when used with a wide range of cameras. A directional microphone, the VideoMicro reduces distracting peripheral sounds and focusses on the audio in front of the camera. Its pickup is more forgiving than RØDE’s other on-camera microphones providing a more natural sound when recording indoors. Perfect for capturing incredible audio to accompany inspiring vision. The microphone body is made from aluminum, giving it a high level of RF rejection, and is finished in RØDE’s high-grade ceramic anti-glare black coating. Included with the VideoMicro is a camera shoe mount featuring a Rycote Lyre shock mount. Featuring a suspension structure composed of a hard-wearing thermoplastic, it is far more effective at minimising unwanted vibrations, handling and cable-borne noise than traditional elastic suspensions. Virtually indestructible, the Rycote Lyre will never sag, snap, wear out or require rethreading to maintain its effectiveness. Also included is the WS9 synthetic furry wind shield with foam inner cell, designed for use in outdoor scenarios where wind and environmental noise can inhibit recordings. Optionally available is the RØDE SC7, a TRS to TRRS cable that allows the VideoMicro to be used with smartphones, to capture crystal clear, directional sound for video and video applications such as Periscope.
VideoMicro Specifications
| Acoustic Principle | Pressure Gradient |
| Active Electronics | JFET impedance converter |
| Capsule | 0.50" |
| Polar Pattern | |
| Address Type | End |
| Frequency Range | 100Hz - 20kHz |
| Maximum SPL | 140dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Sensitivity | -33.0dB re 1 Volt/Pascal (22.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 20dB-A |
| Power Options | Phantom Power Required |
| Weight | 42gm |
| Dimensions | 21mmH x 21mmW x 80mmD |
| Output | |
| Warranty | 1 year with free extension to 2 years following registration here |
RODE VIOLIN CLIP Stringed Instrument Mount for Lavalier Microphones
$ 12.99 - Sold Out
RODE VIOLIN CLIP Stringed Instrument Mount for Lavalier Microphones
Rode Vlogger Kit - iOS Edition for iOS devices
$ 149.00 - Sold Out
Rode Vlogger Kit - iOS Edition for iOS devices
Rode SKU: VLOGVMML | Helix SKU: RMVLOGVMML
Overview
The iOS Vlogger Kit contains everything you need to get professional results when filming using your iPhone. The VideoMic Me-L microphone connects directly to your device, delivering crisp, clear, directional sound for any application. The SmartGrip secures your device firmly in place for stable recording and connects seamlessly to the Tripod 2 for either handheld or tabletop use, while the MicroLED ensures all your shots are perfectly lit.
Key Features:
- Complete iPhone filmmaking kit
- Directional sound pickup to reduce background noise
- MicroLED light offers over four hours operation on a single charge
- Three-position tripod for handheld or static use
- Gimbal tripod head for accurate camera positioning
- All-metal mount with rubberised grips for phones 65mm to 85mm wide
- All-in-one mobile filmmaking kit, including a RØDE VideoMic, Tripod 2, SmartGrip, MicroLED and accessories
- Options for iOS (Lightning), Android (USB-C) devices and a Universal Edition (3.5mm)
- High-quality microphone that delivers professional sound in any recording situation
- Three-position tripod for either handheld or tabletop use
- MicroLED on-camera light with eight coloured filters for flawless shots
- Lightweight all-metal mount with rubberised grips, accommodates phones 65mm to 85mm wide
IN THE BOX:
- VideoMic Me-C Microphone
- Rubber Clip
- WS9 Windshield
- SmartGrip
- Tripod 2
- MicroLED On-camera Light
- Clip-on Diffuser
- 8 Coloured Filters
- USB-C Cable for recharging the MicroLED on-camera light
Rode Vlogger Kit - USB-C Edition for compatible phones
$ 149.00 - Sold Out
Rode Vlogger Kit - USB-C Edition for compatible phones
Rode SKU: VLOGVMMC | Helix SKU: RMVLOGVMMC
Overview
The USB-C Vlogger Kit contains everything you need to get professional results when filming using your USB-C equipped mobile phone. The VideoMic Me-C microphone connects directly to your device, delivering crisp, clear, directional sound for any application. The SmartGrip secures your device firmly in place for stable recording and connects seamlessly to the Tripod 2 for either handheld or tabletop use, while the MicroLED ensures all your shots are perfectly lit.
Key Features:
- Complete USB-C mobile fi lmmaking kit
- Directional sound pickup to reduce background noise
- MicroLED light offers over four hours operation on a single charge
- Three-position tripod for handheld or static use
- Gimbal tripod head for accurate camera positioning
- All-in-one mobile filmmaking kit, including a RØDE VideoMic, Tripod 2, SmartGrip, MicroLED and accessories
- Options for iOS (Lightning), Android (USB-C) devices and a Universal Edition (3.5mm)
- High-quality microphone that delivers professional sound in any recording situation
- Three-position tripod for either handheld or tabletop use
- MicroLED on-camera light with eight coloured filters for flawless shots
- Lightweight all-metal mount with rubberised grips, accommodates phones 65mm to 85mm wide
|
IN THE BOX
|
RODE VMGO Video Mic GO Lightweight On-Camera Microphone Super-Cardio
$ 99.00 - Sold Out
RODE VMGO Video Mic GO Lightweight On-Camera Microphone Super-Cardio
- High quality directional microphone
- No battery required
- Integrated Rycote® Lyre® shock mounting
- Our lightest mic at only 73g
- Rugged reinforced ABS construction
- Windshield included
- 3.5mm mini-jack output
- Integrated cold-shoe mount with 3/8” thread
- Two year extended warranty when you register your microphone
Clear, directional audio on the GO!
Compact and light weight by design, the VideoMic GO delivers clear, crisp, directional audio with incredible ease of use. Its tight pickup area focuses directly in front of the microphone and reduces other surrounding sounds, ensuring that your subject is isolated from distracting background noise.
The integrated Rycote® Lyre® shock mount isolates your microphone from bumps and vibrations that could otherwise interfere with your sound.
Constructed from a single piece of hard-wearing thermoplastic, the Lyre® provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap.
The VideoMic GO has no complicated switches or settings and is powered by your camera's external microphone input, requiring no batteries to operate, ensuring you never miss a great shot.
The VideoMic GO is designed and made in Australia.
| Acoustic Principle | Line Gradient |
| Active Electronics | JFET impedance converter with bipolar output buffer |
| Capsule | 0.50" |
| Polar Pattern |  |
| Address Type | End |
| Frequency Range | 100Hz - 16kHz |
| Maximum SPL | 120dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Sensitivity | -35.0dB re 1 Volt/Pascal (17.80mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 34dB-A |
| Weight | 73.00gm |
| Dimensions | 79.00mmH x 73.00mmW x 167.00mmD |
| Output | |
| Warranty | 1 year with free extension to 2 years |
Rode VMGO Video Mic GO Lightweight On-Camera Microphone Super-Cardio Default
$ 150.00 - Sold Out
Rode VMGO Video Mic GO Lightweight On-Camera Microphone Super-Cardio Default
Rode VXLR Adapter for VideoMic Mini-Jack Female to XLR Male
$ 12.99 - Sold Out
RODE VXLR Minijack to XLR Adaptor
The RODE VXLR Minijack to XLR Adaptor is used to convert a 3.5 mm minijack to a 3 pin XLR. Use the VXLR adaptor to hook your Video Mic up to your studio gear. It's that simple!
Weight:
48.00gm
Dimensions:
58.00mmH x 19.00mmW x 19.00mmD
RODE WS-HS1-P Pop Filter for HS1 Pink Headset Microphone (Beige)
$ 11.99 - Sold Out
RODE WS-HS1-P Pop Filter for HS1 Pink Headset Microphone (Beige)
RODE WS2 Pop Filter / Wind Shield
$ 19.99 - Sold Out
Provides additional protection for the microphone capsule against any wind noise or plosives. Suits Broadcaster, K2, NTK, NT1-A, NT2-A, NT1000, NT2000, Podcaster, Procaster
| Weight | 10.00gm |
| Dimensions | 110.00mmH x 85.00mmW x 85.00mmD |
| Warranty | 1 year |
RODE WS3 Pop Filter / Wind Shield
$ 19.99 - Sold Out
Provides additional protection for the microphone capsule against any wind noise or plosives. Suits NT3, M3
RODE WS4 Pop Filter / Wind Shield
$ 19.99
Provides additional protection for the microphone capsule against any wind noise or plosives. Suits NT4
RODE WS5 Pop Filter / Wind Shield
$ 19.99 - Sold Out
RODE WS5 Pop Filter / Wind Shield
The WS5 windshield provides additional protection for the microphone capsule against any wind noise or plosives. Suits NT5, NT55, M5
| Weight | 1.00gm |
| Dimensions | 48.00mmH x 42.00mmW x 42.00mmD |
| Warranty | 1 year |
RODE WS6 Pop Filter / Wind Shield
$ 59.00 - Sold Out
Deluxe Windshield comprised of open cell foam and fur sleeve. Suits NTG-1, NTG-2, VideoMic and shotguns with a maximum slot length of 160.5mm (6 1/4?) and a diameter of 21-22.5mm
RODE WS7 Pop Filter / Wind Shield
$ 59.00 - Sold Out
RODE WS7 Pop Filter / Wind Shield
RODE WS8 Pop Filter / Wind Shield
$ 25.00 - Sold Out
RODE WS8 Pop Filter / Wind Shield
RODE WSHS1B Windscreen for HS1B Headset (Black)
$ 11.99 - Sold Out
RODE WSHS1B Windscreen for HS1B Headset (Black)
Rode WSVM Pop Filter/Wind Shield
$ 11.99
The Rode WSVM Pop Filter Wind Shield is designed for use with Rode Videomic, NTG1 and NTG2. The WSVM provides additional protection for the microphone capsule against any wind noise or plosives.
- Weight: 4.00gm
- Dimensions: (H x W x D)50 x 50 x 162mm
|
Rode Windscreens
|
WS6
|
WS7
|
WSVM
|
|---|---|---|---|
|
Compatible with NTG1
|
✓
|
✓
|
|
|
Compatible with NTG2
|
✓
|
✓
|
|
|
Compatible with NTG3
|
✓
|
||
|
Compatible with Videomic
|
✓
|
||
|
Functions as a Pop Filter
|
✓
|
✓
|
RODE ZP1 Zip Pouch for NT1-A, NT2-A, NT3, NT4, NT5, NT55, NT6, S1, M3, NTG-1, NTG-2, NTG-3, and Broadcaster Microphones
$ 9.99 - Sold Out
RODE ZP1 Zip Pouch for NT1-A, NT2-A, NT3, NT4, NT5, NT55, NT6, S1, M3, NTG-1, NTG-2, NTG-3, and Broadcaster Microphones
Rogue 3-in-1 Flash Grid with 3 Gel Starter Set
$ 39.95 - Sold Out
Rogue 3-in-1 Flash Grid with 3 Gel Starter Set
Rogue SKU: ROGUEGRID2 | Helix SKU: EXROGUEGRID2
Overview
The Rogue 3-in-1 Flash Grid uses 2 interchangeable and stackable honeycomb grid inserts to create a 45º, 25º, or a tight 16º grid spot for dramatic lighting effects.
The Rogue Flash Grid includes the new attachment strap and a starter set of 3 colorful effects gels (Dark Salmon, Steel Green and Oklahoma Yellow).
Honeycomb grids produce a spot of light with gradual fall-off. They can be used as main lights, as hair lights in portraiture, or for background and accent lights to create mood and drama.
The 3-in-1 Rogue Flash Grid is designed to fit most standard sized flash models from Canon, Nikon, Sony, Nissin, Phottix, ProMaster and Yongnuo.
New Rogue Grid Attachment Design: The Rogue Grid uses an improved belt and buckle design to provide a faster and more secure attachment to your flash. The integrated attachment strap is adjustable to fit all popular brands of accessory flashes with a circumference measuring from 8" to 9 3/4".
Features:
- Produces 16, 25 and 45 degree grid spots
- Attaches quickly & securely
- Fits all popular brands of accessory flashes
- Size: 3.6" x 1.2" (92mm x 30mm)
- Weight: 3.9 oz (110g)
Contents:
Grid Bezel
25˚ Honeycomb Grid insert
45˚ Honeycomb Grid insert
Grid Snoot (with integrated attachment strap)
3-Gel Starter Set (Dark Salmon, Oklahoma Yellow, Steel Green)
Soft Fabric Carry Pouch
