Ikelite O-Rings for 1 Inch Ball Arm (Set of 10)
$ 8.00 - Sold Out
Ikelite O-Rings for 1 Inch Ball Arm (Set of 10)
Ikelite SKU: 4081.01 | Helix SKU: 408101
Overview
Use to replace worn or broken o-rings on most Ikelite and non-Ikelite 1-inch ball arms. Replace the o-rings on your ball arm components occasionally for maximum grip and low-tension holding power.
Ikelite O-Ring for PC-Series Flashlight - PC / PCa (4 C cell / 6 AA cell)
$ 9.95 - Sold Out
Ikelite O-Ring for PC-Series Flashlight - PC / PCa (4 C cell / 6 AA cell)
Ikelite SKU: 0134.28 | Helix SKU: 013428
Overview
Replacement seal for PC-series Halogen or LED light front. Requires light lubrication with Ikelite silicone lubricant, sold separately.
Ikelite O-Ring for PC-Series Flashlight - PCm (4 AA cell)
$ 9.95
Ikelite O-Ring for PC-Series Flashlight - PCm (4 AA cell)
Ikelite SKU: 0134.23 | Helix SKU: 013423
Overview
Replacement seal for PC-series Halogen or LED light front. Requires light lubrication with Ikelite silicone lubricant, sold separately.
Ikelite Replacement O-Ring for DS-125/DS-160 & DLM Ports
$ 8.00 - Sold Out
Ikelite Replacement O-Ring for DS-125/DS-160 & DLM Ports
Ikelite SKU: 0132.36 | Helix SKU: 013236
Overview
Compatible with:
- DLM port system mount and extensions
- DS161, DS160, DS125 battery packs
This o-ring should be lubricated when used with a lens port. Use only Ikelite silicone lubricant to prevent interaction with our plastics, swelling, or leakage.
This housing should not be lubricated when used on a battery pack.
Ikelite #9312.28 O-Ring Set for Older Ikelite Housings 8" Diameter - New
$ 9.95
Ikelite #9312.28 O-Ring Set for Older Ikelite Housings 8" Diameter - New
Ikelite #9312.27 O-Ring Set for Older Ikelite Housings 7" Diameter - New
$ 9.95
Ikelite #9312.27 O-Ring Set for Older Ikelite Housings 7" Diameter - New
Ikelite #9312.26 O-Ring Set for Older Ikelite Housings 6" Diameter - New
$ 9.95
Ikelite #9312.26 O-Ring Set for Older Ikelite Housings 6" Diameter - New
Aquatica O-ring for 90SX
$ 12.99
Underwater photographic equipment cannot be watertight unless the O-rings that seal it are flawless. Always carry spare O-rings in your camera case.O-rings are the most important components of your underwater camera system. If the O-ring is lubricated, it will be elastic enough to shape itself uniformly around the channel. If it is dry, there will be too much friction to allow it to reshape itself uniformly. It will not safeguard against flooding.Every time you open the camera to change film, examine the O-ring and service if necessary.Always clean and lubricate after every diving day.When in doubt about the sealing capability of an O-ring, always discard and replace.Never use a sharp or pointed object to remove an O-ring! Use the O-ring remover tool.Don't overgrease! Too much grease attracts debris that will disrupt the seal and cause flooding. Silicone grease is not a sealant; it only protects the O-ring from abrasion. A perfectly greased O-ring looks moist and shiny.
Sea & Sea O-Ring Set for Strobes
$ 13.95 - Sold Out
The Sea & Sea O-Ring Set for Strobes YS-01, YS-02, YS-90, YS-110, YS-110a YS-27, and YS-30 strobes.
Ikelite O-Ring 0132.45 for DL Port System, ULTRAcompact Housings
$ 14.95 - Sold Out
Ikelite O-Ring 0132.45 for DL Port System, ULTRAcompact Housings
Ikelite SKU: 0132.45 | Helix SKU: 013245
Overview
Compatible with:
- DL Port System
- ULTRAcompact Housings
- Compact Video Housings
Requires light lubrication with Ikelite silicone lubricant, sold separately.
