LowePro SKU: LP36869-PWW | Helix SKU: LP36869
The Fastpack series has been trusted to travel for years. The next-generation pack design includes enhanced protection with a built-in All Weather AW Cover™ and CradleFit™ device compartment, plus three, primary storage zones to help keep you organized and ready for the fast pace of modern travel.
|Camera Compartment Dimensions||11.42 x 6.10 x 10.83 in|
|External Dimensions||12.20 x 10.24 x 19.68 in|
|Laptop Compartment Dimensions||11.42 x 0.79 x 18.11 in|
|Tablet Compartment Dimensions||9.45 x 0.59 x 12.01 in|
|Top Compartment Dimensions||11.42 x 6.10 x 8.86 in|
Pelican SKU: 1504 | Helix SKU: PC1504S
Sensitive equipment needs protection, and since 1976 the answer has been the Pelican™ Protector Case. These cases are designed rugged, and travel the harshest environments on earth. Against the extreme cold of the artic or the heat of battle, Pelican cases have survived.
Made in the USA, these tough cases are designed with an automatic purge valve, that equalizes air pressure, a watertight silicone O-ring lid, over-molded rubber handles and stainless steel hardware.
INTERIOR (L X W X D)
16.75" x 11.18" x 6.12" (42.5 x 28.4 x 15.5 cm)
EXTERIOR (L X W X D)
18.50" x 14.06" x 6.93" (47 x 35.7 x 17.6 cm)
LID DEPTH: 1.81" (4.6 cm)
BOTTOM DEPTH: 4.31" (10.9 cm)
TOTAL DEPTH: 6.12" (15.5 cm)
INT VOLUME: 0.66 ft³ (0.019 m³)
WEIGHT WITH FOAM: 7.94 lbs (3.6 kg)
WEIGHT EMPTY: 7.13 lbs (3.2 kg)
BUOYANCY: 50.00 lbs (22.7 kg)
FOAM LAYERS: Layer 1 (Lid): 1.73" - Convolute / Layer 2 (Base): 0.75" - Pad / Layer 3 (Base): 3.38" - Pick N Pluck
PINS: Stainless Steel
FOAM: 1.3 lb Polyurethane
PURGE BODY: ABS
PURGE VENT: 3 Micron Hydrophobic Non-Woven
MINIMUM TEMPERATURE: -40° F (-40 ° C)
MAXIMUM TEMPERATURE: 210° F (99 ° C)
The PROMASTER Deluxe Filter case provides the ultimate storage solution and protection for your filters. Each filter pocket is made from anti-static material to help keep your filters clean and ready for use.
Rhino SKU: SKU095 | Helix SKU: RHSKU095
The Slider Carrying Case is a padded soft shell case that is designed to carry your complete Rhino Slider setup when you’re filming locally. It allows you to store your Rhino Slider with Arc II, Focus, and Motor attached so you don’t have to take down your kit everytime you film at a new location. Setup is as simple as mounting to a tripod using the new Tripod Quick Mount System and powering your gear on.
Note: This version is slightly longer than the previous carrying case to allow for the longer motor to fit assembled.
In the box
The Slider Hard shell case is designed to fit all of your Rhino Slider gear to create stunning 4-axis slider shots. It has dual handles and recessed rollers for easy transportation when traveling. Integrated into the lid are 4 pockets for spare cables, lens gears, batteries, etc.
$ 169.39 - Sold Out
SKB SKU: 3i-2011-8DT | Helix SKU: SK3I20118DT
SKB has teamed up with Think Tank Photo—the premier photo/video bag and backpack company—to design quality interiors that provide photographers and videographers with the best of both worlds: soft case adaptability with the unparalleled strength and durability people expect from SKB's versatile watertight, airline-tough cases.
The 3i-2011-8DT is an airline carry-on approved size, watertight and dustproof, and features a deluxe Nylex-wrapped closed cell fitted foam liner and (10) nylon dividers with heavy duty hook-and-loop tabs to create the perfect fit.
All SKB iSeries cases come standard with an Unconditional Lifetime Warranty.
Tenba SKU: 634-510 | Helix SKU: TE634510
Tripods, light stands, backgrounds, booms, and other outsized gear need to feel safe and secure too. The Tripak is the answer.
Tripaks provide protection for your tripods, light stands, backgrounds, booms, and other outsized gear.
1000 DENIER NYLON EXTERIOR
– tough as nails, water- and abrasion-resistant, yet light weight, elegant and professional in appearance.
- Reinforced seams and stress points for strength and long-term durability.
47 in. W x 12 in. H x 12 in.D ( 119 X 30 X 30 cm )
46 in. W x 11 in. H x 11 in. D ( 117 X 28 X 28 cm )
Converts older 634-712 Air Case for the latest thin 21.5-inch iMac
Air Cases feature Tenba's exclusive design and construction - including a patented internal framework - that offers you the shippable protection of a hard case at a fraction of the weight. Saves your back, saves your money. Over 30 sizes, virtually limitless possibilities. The industry standard for lightweight shipping cases for over 20 years. Tenba's patented Air CaseTM construction comprises a multi-layered skeleton of air-channeled plastic panels, high-density foam, and specially-molded framing components, with a heavily reinforced ballistic nylon outer shell. They are strong enough to stand on, even when empty, and are built to meet or exceed ATA shipping standards.