Cactus Wireless Flash RF60X
$ 185.00 - Sold Out
Cactus Wireless Flash RF60X
Cactus SKU: CACRF60X | Helix SKU: CUCACRF60X
Overview
The Wireless Flash RF60X is a portable flash with a built-in wireless transceiver that supports X-TTL with Cactus V6 II / V6 IIs wireless flash transceiver, high-speed sync / FP mode,* AF-assist and an exclusive Cooling Mode.
Pair with Cactus HHS Tranceiver V6II or V6IIs for Sony MIS
RF60X, V6 II and IIS X-TTL firmware update microsite
Built-in wireless commander and slave
The Cactus RF60X is a 2.4GHz radio-based wireless portable flash with a built-in transceiver that runs on 16 channels. It operates in three modes, Local for on-camera operation, Master and Slave modes for off-camera. To act as a commander, set an RF60X to Master and it can trigger an unlimited number of RF60X set in Slave mode. The effective distance between the RF60X Master and RF60X Slave is up to 100m (328 feet).
Wireless TTL on 8 camera brands
With the latest firmware installed, RF60X can transform into a wireless TTL off-camera flash triggered by V6 II and V6 IIs running X-TTL firmware. What this means is that RF60X will give you automatic flash exposure shooting from compatible Canon, Fujifilm, Nikon, Olympus, Panasonic, Pentax, Sigma and Sony cameras.
Automatic wireless HSS support
When triggered by a Cactus V6 II / V6 IIs, the RF60X supports High-speed sync (HSS) / Focal Plane (FP) mode, typically found on a TTL flash. Controlled from the V6 II / V6 IIs transmitter, the user can select between Normal HSS, the typical longer pulsing flash with lower power outputs; or Power Sync, which gives you a boost in flash power.
Quick recharge time
After firing at full power the flash can recycle as quickly as 1.9 seconds.
AF-assist light
Unlike most other portable flash in the market, the AF-assist Light on the RF60X can also function as an off-camera flash in Slave mode. The Cactus V6 II turns on the AF-assist Light automatically which will illuminate your subject and provide extra light to help the camera lens focus. This is especially useful as the flash is usually placed closer distances to the subject than the camera.
Cooling mode
By intelligently regulating the recycle time the RF60X runs cool all the time. This industry exclusive feature allows the flash to sustain a steady performance even after consecutive full power flashes. You can now shoot without the restriction of an overheat cut-off.
Remote control of power and zoom levels
The power levels of the RF60X set in Slave mode can be adjusted from 1/128 to 1/1 full power in steps of 0.3EV. Zoom level can also be controlled from a wide 24mm zoom to 105mm. With remote power and zoom control, you can place the RF60X units in hard-to-reach places and control its power and zoom level wirelessly.
Group control of up to four groups with configurable Group Alias
In a typical lighting setup, the ability to adjust, activate and deactivate groups of lights is vital in creating the desired lighting effect. The RF60X can be configured into four distinct groups. Power output can be adjusted in individual group or in all groups at the same time for fast adjustments. To streamline the shooting experience, user can rename each group to: KEY, FILL, SPOT, RIM, HAIR, LEFT, RIGHT, BACK and FRONT.
Optical Slave with delay feature
The RF60X has a built-in optical sensor. The optical sensor captures pre-flash signals that are being emitted earlier than the flash sync. By setting the pre-flash optical trigger and the delay timer, you can set the exact time for the flash to start firing. This allows the RF60X to do not only first-curtain and second-curtain sync (also referred as front and rear curtain), but to fire at any given point of the image.
Multi-flash feature
In Multi mode, a rapid series of flashes is fired to capture multiple images of a moving subject in a single frame. This feature is available in all three flash modes so its users can create the desired effects with both on and off camera flash.
Compatible with other Cactus devices
Flash power and zoom level on RF60X Slave units can be controlled by an RF60X Master, RF60 Master, as well as Cactus V6, V6 II, and V6 IIs Flash Transceiver. Cactus V5 also supports basic flash triggering on the RF60X but does not support power and zoom level control on the RF60X. The RF60X in Master mode cannot trigger portable flashes mounted on V6 II or V6 IIs in Receiver (RX) mode; Cactus V6 II and V6 IIs can only be triggered by a V6 II and V6 IIs respectively.
Notes on compatibility:
- Cactus RF60X is compatible with the Panasonic Lumix DMC-GX8. However, due to special timing requirements by the camera, when triggered by a Cactus V6 II, the RF60 only supports HSS up to 1/1,000s. (Updated: September 1, 2016);
- High-speed sync is supported when RF60X is triggered by a Cactus V6 II or V6 IIs on a compatible camera.
- Camera(s) tested that does not support high-speed sync modes when the RF60 is triggered by the Cactus V6 II:
- Nikon D600 (Updated: January 24, 2017) - The RF60X in Master mode cannot trigger portable flashes mounted on V6 II or V6 IIs in Receiver (RX) mode; Cactus V6 II and V6 IIs can only be triggered by a V6 II and V6 IIs respectively.
Specifications
- Guide Number (ISO 100):
| Zoom (mm) | 24 | 28 | 35 | 50 | 70 | 80 | 105 |
| GN (meter) | 33 | 34 | 38 | 45 | 51 | 54 | 56 |
| GN (feet) | 108 | 112 | 124 | 147 | 168 | 177 | 183 |
- Motor zooms: 24mm – 28mm – 35mm – 50mm – 70mm – 80mm – 105mm
- Power levels (22 in total):
| 1/1 | 1/2 | 1/4 | 1/8 | 1/16 | 1/32 | 1/64 | 1/128 |
| 1/2 +0.3 |
1/4 +0.3 |
1/8 +0.3 |
1/16 +0.3 |
1/32 +0.3 |
1/64 +0.3 |
1/128 +0.3 |
|
| 1/2 +0.7 |
1/4 +0.7 |
1/8 +0.7 |
1/16 +0.7 |
1/32 +0.7 |
1/64 +0.7 |
1/128 +0.7 |
- Flash durations(t.5): 1/1,000s – 1/45,000s;
- Modes: Local (L), Master (M), and Slave (S);
- Working radio frequency: 2.4GHz;
- Number of channels: 16;
- Number of groups: 4;
- Maximum wireless effective distance: 100 meters (328 feet);
- Built-in optical slave mode:
S1 (straight triggering);
S2 (pre-flash ignored triggering); - Flash head swivel: 270-Degree (180-Degree left and 90-Degree right);
- Power input: 4 AA batteries (LR6 alkaline or Ni-MH), rechargeable Ni-MH for best performance;
| Battery Type | Primary LR6 Alkaline 1.5V | Rechargeable HR6 Ni-MH 1.2V |
| Flash Count at Full Power |
110 | 170 |
| Recycle Time at Full Power |
2.5s | 1.9s |
- Minimum recycle time:
0.1-2.5 seconds (with alkaline batteries);
0.1-1.9 seconds (with HR6 Ni-MH); - Color temperature: 5600k +/- 200k;
- Operating temperature: -20°C to +50°C;
- Dimensions: 205 x 83 x 61mm;
- Net weight: 395g.
Item Includes
- Flash RF60X x1;
- Flash Stand FS-2 x1;
- Carrying Case FC-3 x1;
- English User Manual x1.
Canon 600EX II-RT Speedlite
$ 499.99
Canon 600EX II-RT Speedlite
Canon SKU: 1177C002 | Helix SKU: CA1177C002
Overview
The Speedlite 600EX II-RT delivers impressive power, responsive performance and advanced, wireless communication for those who demand the very best in flash photography. Featuring improved continuous performance up to 2.0x* faster than its predecessor, the Speedlite 600EX II-RT performs at a phenomenal speed, and reliably at that - new Quick Flash settings and a flash-readiness indicator help ensure priority shutter operation, even when the flash isn't fully recharged. It's also built for fast, convenient use virtually anywhere for any situation, with improved combination button and dial controls, a refined dust- and water-resistant body and new accessories tailor-made for enhanced lighting effects. For speedy and comprehensive flash photography on the go, the Speedlite 600EX II-RT delivers portable, professional performance with ease.
Specifications
Compatible Cameras
Type-A EOS cameras (E-TTL II/E-TTL autoflash)
Type-B EOS cameras (TTL autoflash)
Guide Number
The Guide No. is approximately 49.2 ft./15m at ISO 100.
The maximum Guide No. is approximately 196.9 ft./60m at ISO 100 and 200mm flash coverage.
When the extendable wide panel is pulled out, the flash coverage is 14mm.
Number of Flashes
Approx. 100-700 flashes.
* Nominal min. time when using 1900mm Ah type AA/HR6 Ni-MH batteries.
* Based on Canon Testing Standards.
Recycling Time
Normal flash: 0.1-5.5 sec.
Quick flash: 0.1-3.3 sec.
* Nominal min. time when using 1900mm Ah type AA/HR6 Ni-MH batteries.
* Based on Canon Testing Standards.
Flash Range
Effective flash range with EF 50mm f/1.4 lens at ISO 100
- Normal Flash:
Approx. 1.6-91.2 ft./0.5-27.8m
- Quick Flash (at Guide No. 68.2 ft./20.8m):
Approx. 1.6-48.6 ft./0.5-14.8m
- High-speed Sync (at 1/250 sec. shutter speed):
Approx. 1.6-48.2 ft./0.5-14.7m
AF Assist Beam
System:
Infrared AF-assist beam
Compatible AF System:
TTL second image formation phase-difference AF
Supporting 1-65 AF points (28mm or longer focal length)
- Phase-difference AF during viewfinder shooting
- Quick mode during Live View shooting or movie shooting
At center: 2.0-32.8 ft./0.6-10.0m
At periphery: 2.0-16.4 ft./0.6-5.0m
Custom Functions
15 Functions
6 Functions
Power Source
Four AA-size/LR6 alkaline or AA/HR6 Ni-MH batteries
External Power Source
Compatible (Compact Battery Pack CP-E4N recommended)
Dimensions
Approx. 3.10 x 5.64 x 4.83 in./78.7 x 143.2 x 122.7mm
Weight
Approx. 15.34 oz./435g
DISCLAIMERS
* As compared to the Speedlite 600EX-RT. When used with optional Compact Battery Pack CP-E4N.
† Prices and specifications subject to change without notice.
Canon Speedlite 470EX-AI Flash
$ 299.99
Canon Speedlite 470EX-AI Flash
Canon SKU: 1957C002AA | Helix SKU: CA1957C002
Overview
Our all-new Speedlite 470EX-AI is engineered to change the way you think about flash photography. As the world's first flash with an AI Bounce function (Auto Intelligent)*, the Speedlite 470EX-AI is equipped to detect the distance to your subject as well as the ceiling in order to calculate the ideal angle for the flash to achieve desired results, automatically. That's right, the flash head swivels in multiple directions to formulate the ideal bounce flash angle while you simply watch it work. The Speedlite 470EX-AI can even maintain defined exposure and bounce angles when you’re alternating between horizontal and vertical compositions. In addition, it boasts a powerful maximum guide number of 47 (154 ft./47m) at ISO 100, a zooming flash head and numerous features for versatile and powerful flash photography.
Specifications
Compatible
Type-A EOS cameras (E-TTL II/E-TTL autoflash)
With Type-B EOS cameras, only manual flash and second-curtain sync are possible.
Guide Number
The maximum Guide No. is approximately 154 ft./47m at ISO 100 and 105mm flash coverage.
When the extendable wide panel is pulled out, the flash coverage is 14mm.
Number of Flashes
When using flash only and AA/LR6 alkaline batteries
Approx. 115–800 flashes
When using flash only and AA/HR6 Ni-MH batteries
Approx. 140–966 flashes
Nominal min. time when using 1900mAh type AA/HR6 Ni-MH batteries.
Based on Canon Testing Standards.
Recycling Time
When using flash only and AA/LR6 alkaline batteries
Normal flash: 0.1–5.5 sec.
Quick flash: 0.1–3.9 sec.
When using flash only and AA/HR6 Ni-MH batteries
Normal flash: 0.1–3.5 sec.
Quick flash: 0.1–2.8 sec.
Nominal min. time when using 1900mAh type AA/HR6 Ni-MH batteries.
Based on Canon Testing Standards.
Flash Range
Effective flash range with EF 50mm f/1.4 lens at ISO 100 and standard light distribution
- Normal Flash:
Approx. 2.3–77.1 ft./0.7–23.5m - Quick Flash (at Guide No. 66.3 ft./20.2m):
Approx. 2.3–47.2 ft./0.7–14.4m - High-speed Sync (at 1/250 sec. shutter speed):
Approx. 2.3–41.0 ft./0.7–12.5m
AF Assist Beam
System:
Infrared AF-assist beam
Compatible AF System:
TTL second image formation phase-difference AF
Supporting 1-19 AF points (28mm or longer focal length)
- Phase-difference AF during viewfinder shooting
- Quick mode during Live View shooting and movie shooting
At center: 2.3–32.8 ft./0.7–10.0m
At periphery: 3.3–16.4 ft./1.0–5.0m
Custom Functions
10 Custom Functions
9 Personal Functions
Power Source
Four AA-size/LR6 alkaline batteries
- Size-AA/HR6 Ni-MH batteries also usable.
- Lithium batteries cannot be used.
Dimensions (W x H x D)
Flash unit: Approx. 2.94 x 5.13 x 4.14 in./74.6 x 130.4 x 105.1mm
Bounce adapter: Approx. 3.08 x 2.19 x 1.58 in./78.3 x 55.7 x 40.2mm
Weight
Flash unit (excluding batteries): Approx. 13.6 oz./385g
Bounce adapter: Approx. 0.53 oz./15g
Fujifilm EF-X500 TTL Speedlight
$ 449.95
Fujifilm EF-X500 TTL Speedlight
Fuji SKU: 16514118 | Helix SKU: FJ16514118
Overview
- Low-profile, premium design that is perfectly suited to compact and lightweight X-Series cameras.
- High-speed synchronization (FP) that supports the 1/8000 sec. shutter found in the FUJIFILM X-Pro2.
- Multiple flash-unit TTL auto function unleashes users' creativity by allowing them to control any lighting conditions.
- Weather and dust resistant making it the perfect companion for the FUJIFILM X-T1 and X-Pro2, which have the same levels of protection.
FP flash (high-speed flash sync) freeing photographers from worrying about shutter speed
With cameras equipped with a focal plane shutter, when the shutter speed is high, the first and second shutter curtains move across at the same time, making the exposure through a narrow vertical slit between them. Because of this, light from a conventional flash can only reach a small section of the sensor. This is why a slower shutter speed must be used in flash photography, with the range of available shutter speeds severely limited.
EF-X500 supports the FP mode (high-speed flash sync), in which the flash outputs continuous light while the first and second curtains travel across the sensor, thereby enabling flash photography at any shutter speed.
When shooting with a near-maximum aperture to create beautiful bokeh, the shutter speed tends to go higher. This flash mode frees photographers from having to be conscious about shutter speed limitations, and instead allows them to focus on shooting.
Wireless multi-flash TTL freely controlling light on subject and background to enable creative photography
EF-X500 can be used in multi-flash setup to freely control light on a subject and background for a creative result. TTL lighting control is available with single flash and also in the multi-flash setup, so that you can start shooting without having to make cumbersome adjustments to light output.
Multiple flashes can be controlled in up to three groups, each of which can be set up to have different light output, allowing you to fine-tune the space of light. As the light output can also be adjusted from the camera, you don’t need to set it down for lighting control.
This is the first Fujifilm flash that is dust-resistant and water-resistant. Use it with the weather-sealed X Series cameras to broaden your photographic fields.
Dust-resistant and water-resistant capabilities expanding the scope of photographic fields when used with X Series cameras
Innovative design with low center of gravity creating a perfect harmony with the lightweight and compact X Series cameras
The front side of EF-X500's main body is applied with leather texture to compliment the design of the X Series cameras. It is designed with low center of gravity to maintain ease of operation when mounted on the X Series cameras, known for their lightweight and compact bodies.
Other product features
- Maximum guide number approx. 50 (ISO100·m) / 164 (ISO100·ft)
- Zooming the illumination angle for the focal lengths of 24mm - 105mm*, and covering the illumination angle of around 20mm* when the wide panel is used
- Flash head that can be tilted up by 90 degrees, down by 10 degrees, to the left by 135 degrees and to the right by 180 degrees for bouncing light
- Equipped with LED video light that can also be used as AF assist light and catchlight
- Registers up to ten combinations of various settings. Register settings to suit a specific shooting condition in advance, so that they can be activated quickly when required.
Optional accessories
The external battery pack "EF-BP1" takes eight AA batteries to shorten charging time and improve the number of flashes per charge.
Specifications
| Type |
|
|---|---|
| Flash head |
|
| Exposure control |
|
| Charge |
|
| Wireless multi-flash system |
|
| Other functions |
|
| Included items |
Soft case |
| Power source |
|
| Dimensions and weight |
|
Nikon SB-300 AF Speedlight
$ 146.95
Nikon SB-300 AF Speedlight - NK4810
Take control of the lighting around you with the Nikon SB-300 AF Speedlight for D-SLRs and hot-shoe equipped Coolpix cameras. Find new inspiration: use the 120° tilting head to bounce the flash off a nearby wall or ceiling (bounce flash), eliminate unwanted shadows on your subject (fill-flash) or illuminate a poorly lit scene with a soft, balanced light tailored to your shot. Shed Light on New Opportunities With the SB-300 AF Speedlight, you'll enjoy a flash that's soft and balanced for excellent color, skin tones and lighting throughout your entire composition-not just on your main subject. Use it in bright situations to fill in unwanted shadows (fill-flash), or use its 120° tilt capability to bounce your flash off the ceiling or a nearby wall for even softer, less direct lighting on your subject (bounce technique). Outstanding Flash Precision Nikons i-TTL (intelligent Through-The-Lens) flash coverage technology tailors the characteristic of the flash to the shot. An imperceptible pre-flash fires milliseconds before the main flash to gather information about the scene-shadow areas, subject distance and reflectance. Your i-TTL capable camera and the SB-300 AF Speedlight then work together to achieve the best exposure and white balance setting possible, all in a fraction of a second.
Nikon SB-500 AF Speedlight
$ 249.95
Nikon SB-500 AF Speedlight - NK4814
Take control of the lighting in your stills and HD videos.
Simple operation, advanced performance
Compact, lightweight and multifunctional
Brighten up your HD video
High-performance LED for video recording
Power, ease and versatility
Nikon i-TTL technology
Specifications
Nikon SB-5000 AF Speedlight
$ 599.95
Nikon SB-5000 AF Speedlight
Nikon SKU: 4815 | Helix SKU: NK4815
Overview
Expanding the reach of creative lighting
Light without limits
New radio controlled communication
Nonstop performance
World's first hot-shoe mount flash cooling system‡
Reimagined design
Smaller and easier to operate
Maximum compatibility
Part of the Nikon Creative Lighting System
Specifications
Nikon SB-700 AF Speedlight
$ 329.95
Nikon SB-700 AF Speedlight
Nikon SKU: 4808 | Helix SKU: NK4808
Overview
Versatility meets portability
Ideal exposure every time
Nikon’s precision i-TTL flash control
Complete lighting control
Wireless commander mode
Ready for any situation
Intuitive versatile lighting options
Specifications
Panasonic Lumix FL200L External Flash
$ 229.99
Panasonic Lumix FL200L External Flash
Panasonic SKU: DMW-FL200L | Helix SKU: PADMWFL200L
Overview
LUMIX FL200L Flash
The DMW-FL200L (GN20) provides 90-degree vertical bounce lighting and can also be used as an LED light in video recording. It features a wireless shooting capability with Wi-Fi®-compatible LUMIX cameras
Features
- Built in LED for video capture
- Wireless multi-flash grouping A/B/C, 4 Channels
- Bounce shooting (0 to 90 degrees horizontally
- Fast charging in about 3 seconds
- Guide number GN20
Specifications
-
- Power Requirements: DC 3.0 V
- Batteries Recommended for Use: LR6/AA Alkaline dry batteries x 2
- Batteries Recommended for Use: HR6/AA Rechargeable nickel metal hydride batteries (Ni-MH) x 2
- Charging Time (from full flash until the [CHARGE] lamp lights): N/A
- Charging Time (from full flash until the [TEST/ CHARGE] lamp lights): Approx. 4.0 sec: LR6 / AA Alkaline dry batteries
- Charging Time (from full flash until the [TEST/ CHARGE] lamp lights): Approx. 3.0 sec: HR6 / AA Rechargeable nickel metal hydride batteries
- Charging time (from full flash until the [TEST/CHARGE] button lights): N/A
- Firing Period: Approx. 1/50,000 - 1/250 sec
- Firing Period: (varies depending on the flash intensity)
- Number of Flashes (with full flash): Approx. 120 flashes : LR6/AA Alkaline dry batteries
- Number of Flashes (with full flash): Approx. 200 flashes : HR6/AA Rechargeable nickel metal hydride batteries (2,400 mAh type)
- Number of Flashes (with full flash)(differs depending on the photo taking conditions)
- AF Assist Lamp: Effective distance: Approx. 1 - 5 m/3.28 - 16.4 ft
- AF Assist Lamp: (differs depending on the digital camera and type of lens used)
- Flash Mode: TTL AUTO / MANUAL / SL MANUAL / RC
- Guide Number: 20 (ISO 100·m), 14 (ISO 100·m when the wide panel is used)
- Lighting Angle: Covers the angle of view of 12mm and longer (35mm camera equivalent: 24mm and longer)
- Lighting Angle: (With wide panel: 7mm and longer, 35mm camera equivalent: 14mm and longer)
- Power-saving mode: N/A
- Lighting angle: N/A
- Dimensions: Approx. 61.0 (W) x 52.5 (H) x 82.0 (D) mm / 2.402 (W) x 2.067 x (H) 3.228 (D) inch
- Dimensions: (Excluding the projecting parts)
- Weight: Approx. 225 g / 7.94 oz (including batteries)
- Weight: Approx. 175 g / 6.17 oz (main unit)
- Operating Temperature: 0 - 40 °C / 32 - 104 °F
- Operating Humidity: 10 - 80 %RH (no condensation)
- NOTE* Wireless control is available with the DMC-GH4 / GH4R / GH3 / GX8 / GX7 / GM5 / G7 / G6 / GF6.
-
LED
- Illuminance: Approx. 200 lux at 1 m
- Lighting Angle: N/A
- Control Mode: MANUAL
- Continuous Light-Emitting Time: N/A
-
Wireless (RC) function*
- Flash Mode: N/A
- Channel: 4 channels
- Group: 3 groups control
-
Bounce Angle
- Bounce angle: N/A
- Up / Down: 0 - 90 degrees
- Right / Left: N/A
-
- UPC: 885170286986
Panasonic Lumix FL360L External Flash
$ 229.99
Panasonic Lumix FL360L External Flash
Panasonic SKU: DMW-FL360L | Helix SKU: PADMWFL360L
Overview
Features
- Built in LED for video capture
- Wireless multi-flash grouping A/B/C
- Bounce shooting (-7 to 90 degrees horizontally / 180 swivel)
- Fast charging in about 2 seconds
- Guide number GN36
Specifications
-
- Height (Inches): 2 in.
- Width (Inches): 1.5 in.
- Depth (Inches): 3 in.
- Weight (Pounds): 1 lb.
-
- UPC: 885170110731
Panasonic Lumix FL580L External Flash
$ 599.99
Panasonic Lumix FL580L External Flash
Panasonic SKU: DMW-FL580L | Helix SKU: PADMWFL580L
Overview
Features
- Ultra fast recycling time !~ 1.7sec. in full flash.
- Wireless shooting capability ( 4 Ch, 3 Groups).
- Built-in LED video light for video recording.
- Auto zoom head — 14-200mm 35mm camera equivalent.
- Guide Number 58.
- Included accessories: Diffuser, Incandescent Filter, Infrared Filter.
Specifications
-
LED - Illuminance: 100 lux at 1 m
- Lighting Angle: Compatible to the lens of focal length more 12 mm (35 mm camera equivalent: more 24 mm)
- Control Mode: AUTO / MANUAL
- Continuous Light-Emitting Time: Approx. 170 minutes: AA alkaline dry batteries / Approx. 240 miniutes: AA rechargeable nickel metal hydride batteries / (varies depeding on the condition of use)
-
Wireless (RC) function*
- Flash Mode: SL AUTO / SL MANUAL / RC / MULTI
- Channel: 4 channels
- Group: 3 groups control
-
Bounce Angle
- Up / DownUpward: 0 - 90 degrees / Downward: 0 - 7 degrees
- Right / LeftToward the right: 0 - 180 degrees / Toward the left: 0 - 180 degrees
-
Further Specifications
- Power Requirements: DC 6.0 V
- Batteries Recommended for Use: AA alkaline dry batteries (LR6) x 4 / / AA rechargeable nickel metal hydride batteries (Ni-MH) x 4
- Charging Time (from full flash until the [TEST/ CHARGE] lamp lights): Approx. 2.7 sec: AA alkaline dry batteries / Approx. 1.7 sec: AA rechargeable nickel metal hydride batteries
- Firing Period: Approx. 1/20,000 - 1/250 sec / (varies depending on the flash intensity; FP firing excluded)
- Number of Flashes (with full flash): Approx. 125 flashes: AA alkaline dry batteries / Approx. 175 flashes: AA rechargeable nickel metal hydride batteries (min. 1,900 mAh type) / (differs depending on the photo taking conditions)
-
AF Assist Lamp: Effective distance: Approx. 1 - 5 m / 3.28 - 16.4 feet / (differs depending on the digital camera and type of lens used) - Flash Mode: TTL AUTO / AUTO / MANUAL / FP TTL AUTO / FP MANUAL / SL AUTO
- Guide Number: 58 (ISO100&${esc.hash}12539;m), 26 (ISO100&${esc.hash}12539;m, when the wide panel is used)
- Lighting Angle: Covers the angle of view of 12 - 100 mm lenses (35 mm camera equivalent: 24 - 200 mm) / (with wide panel: 7 mm lens, 35 mm camera equivalent: 14 mm)
- Dimensions: Approx. 72.0 (W) x 112.5 (H) x 112.5(D) mm / 2.835 (W) x 4.429 x (H) 4.429 (D) inch / (excluding the projecting parts)
- Weight: Approx. 435 g / 15.34 oz (including alkaline dry batteries) / Approx. 340 g / 11.99 oz (main unit)
- Operating Temperature: 0 - 40 °C / 32 - 104 °F
- Operating Humidity: 10 - 80 %RH (no condensation)
- NOTE* Wireless control is available with the DMC-GH4/ GH3 / GX7 / G6 / GF6.
-
- UPC: 885170194960
Phottix Mitros+ TTL Transceiver Flash for Canon
$ 259.95
Phottix Mitros+ TTL Transceiver Flash for Canon
Phottix SKU: PH80371 | Helix SKU: PH80371
Overview
The Phottix Mitros+ TTL Transceiver Flash is the best of Phottix’s gold-standard products all-in-one. A flash with Phottix Odin Transmitter and Receiver, and Strato receiver all built in.
Features
- GN: 58 Canon-Compatible TTL Flash
- Built-in: Phottix Odin Transmitter and Receiver, and Strato II Receiver
- Optical Slave
- Canon-compatible Master/Slave IR Triggering Modes
- ETTL I/II, Manual and Multi Stroboscopic Modes
- High Speed Sync and Second Curtain Sync
- AF Assist Light
- Flash Zoom: 24-105mm
- External Battery Port, 3.5mm Sync Port
- Quick Flash Mode
The Phottix Mitros+ TTL Transceiver Flash is the best of Phottix’s gold-standard products all-in-one.
What’s the + ?
+ Built-in Odin Transmitter
+ Built-in Odin Receiver
+ Built-in Strato Receiver
+ Memory Functions
The Phottix Mitros is a powerful and durable hot shoe flash that has proven popular since it’s release earlier this year. The Phottix Mitros+ adds significant functionality, allowing photographers to not only use the Mitros on or off camera for lighting, but to also control and trigger remote flash by radio signal. The Mitros+ is an industry landmark and was developed with input from wedding and event photographers.
Use the Mitros+ on-camera as a key or fill light, as well as control and trigger other Mitros+ flashes or compatible flashes using Phottix Odin Receivers. The Mitros+ also offers a built-in Phottix Odin Receiver and Strato II Receiver. Existing Phottix triggers, like the Phottix Odin or Strato II can be used to trigger the Mitros+ without extra receivers.
Odin Functionality
With the Phottix Odin’s functionality built-in the Mitros+ can be used to trigger Phottix Odin and Strato Receivers. Likewise: you can also trigger the Mitros+ using a Phottix Odin TCU or Strato II Multi Transmitter.
Using the Mitros+ in Odin Transmitter Mode provides the same functions found on the Phottix Odin, including:
- Remote power control of groups in TTL with +/- EV adjustments (3 stops in 1/3 stop increments - 18 different levels)
- Remote power control in Manual Mode: Full power to 1/128 in 1/3 stop increments.
- Mix TTL and Manual flash – fire some groups in TTL, others as manual.
- Remote power control in A:B ratio modes with +/- EV adjustments.
- High speed sync – shutter speeds up to 1/8000 sec.
- Second curtain sync functions.
- Remote flash head zoom adjustments – auto or manual
The Mitros+ will control and trigger other Mitros+ flashes in receiver mode or Phottix Odin Receivers.
Like the Phottix Odin, the Mitros+ with a backlit LCD, is intuitive, and easy to use and understand.
Strato Functionality
The Mitros+ has a built-in Strato II Multi-compatible receiver. Existing Strato II Multi transmitter can trigger the Mitros+. The Mitros+ can also trigger Strato II Multi and Strato I Receivers when set in Odin Transmit Mode.
Memory Functions
New with the Mitros+, built-in three location memory save and retrieval functions. Flash set up and custom function information can be saved in the Mitros+’s memory and be quickly recalled when needed. Use the Mitros+ in different modes for different situations? Quickly recall saved set-ups for fast use.
What’s in the Box?
- Flash
- Flash bag
- 3.5mm to 3.5mm cable
- USB cable
- Battery port adapter
- Flash stand
- Diffuser
- Manual (USB drive)
- QC certificate
- Quick-Start guide card
- Warranty card
Specifications
| Power | Four size-AA alkaline or Ni-MH batteries, compatible external battery pack. |
| Modes | E-TTL and E-TTL II, Manual, and Multi Stroboscopic |
| Zoom | Auto and Manual Adjustments |
| Guide No | 58/190 (at 105mm focal length, ISO 100 in meters/feet) |
| Flash coverage | 24-105mm (14mm with wide angle diffuser panel) |
| Rotation | 180 degrees both directions, Up-Down: -7 to 90 degrees. |
| FEC (Flash exposure compensation) | Manual |
| FEB (Flash exposure bracketing) | ±3 stops in 1/3 stop increments (Manual flash exposure compensation and FEB can be combined) |
| Sync modes | First Curtain Sync, Second Curtain Sync, and High Speed Sync |
| Stroboscopic flash | Frequency:1-199Hz Number of flashes: 1-100 |
| Flash exposure confirmation | Blue LED lamp lights up in E-TTL mode |
| Recycling time/Flash-ready indicator | Normal flash: Approx.0.1-5 sec./Red LED indicator lamp lights up. Quick flash: Approx.0.1-2.5 sec./Green LED indicator lamp lights up. |
| Power saving | Non-wireless slave modes: 90 seconds, Wireless slave mode: (programmable) 10 minutes or 60 minutes |
Wireless flash
| Transmission method | Radio Frequency and Optical pulse |
| Channels | 4 |
| Wireless options: | Odin Tx, Odin Rx, Strato II Rx, OP Tx (Master), OP Rx (Slave), OP Slave, OFF |
| Transmission range (Approx.) | Radio: 100m +, Optical: Indoors: 12-16m/39.3-52.4 ft., Outdoors: 7-9m/22.9-29.5 ft. |
| Reception angle | Radio: 360 ° all directions, Optical transmission:±40°(horizontal)，±30°(vertical) |
| Controlled groups | 3 (A, B, and C) |
| Flash ratio control | 1:8-1:1-8:1 |
| Standby current | ≤100uA in sleep mode |
| Dimensions | (L x W x H): 202.8×77.5×58.3 mm |
| Weight | 427g (flash only, excluding batteries) |
Phottix Mitros+ TTL Transceiver Flash for Nikon
$ 259.95
Phottix Mitros+ TTL Transceiver Flash for Nikon
Phottix SKU: PH80372 | Helix SKU: PH80372
Overview
The Phottix Mitros+ TTL Transceiver Flash is the best of Phottix’s gold-standard products all-in-one. A flash with Phottix Odin Transmitter and Receiver, and Strato receiver all built in.
Features
- GN: 58 Nikon-Compatible TTL Flash
- Built-in: Phottix Odin Transmitter and Receiver, and Strato II Receiver
- Optical Slave
- Nikon-compatible Master/Slave IR Triggering Modes
- TTL, Manual and Multi Stroboscopic Modes
- High Speed Sync and Second Curtain Sync
- AF Assist Light
- Flash Zoom: 24-105mm
- External Battery Port, 3.5mm Sync Port
- Quick Flash Mode
The Phottix Mitros+ TTL Transceiver Flash is the best of Phottix’s gold-standard products all-in-one.
What’s the + ?
+ Built-in Odin Transmitter
+ Built-in Odin Receiver
+ Built-in Strato Receiver
+ Memory Functions
The Phottix Mitros is a powerful and durable hot shoe flash that has proven popular since it’s release earlier this year. The Phottix Mitros+ adds significant functionality, allowing photographers to not only use the Mitros on or off camera for lighting, but to also control and trigger remote flash by radio signal. The Mitros+ is an industry landmark and was developed with input from wedding and event photographers.
Use the Mitros+ on-camera as a key or fill light, as well as control and trigger other Mitros+ flashes or compatible flashes using Phottix Odin Receivers. The Mitros+ also offers a built-in Phottix Odin Receiver and Strato II Receiver. Existing Phottix triggers, like the Phottix Odin or Strato II can be used to trigger the Mitros+ without extra receivers.
Odin Functionality
With the Phottix Odin’s functionality built-in the Mitros+ can be used to trigger Phottix Odin and Strato Receivers. Likewise: you can also trigger the Mitros+ using a Phottix Odin TCU or Strato II Multi Transmitter.
Using the Mitros+ in Odin Transmitter Mode provides the same functions found on the Phottix Odin, including:
- Remote power control of groups in TTL with +/- EV adjustments (3 stops in 1/3 stop increments - 18 different levels)
- Remote power control in Manual Mode: Full power to 1/128 in 1/3 stop increments.
- Mix TTL and Manual flash – fire some groups in TTL, others as manual.
- Remote power control in A:B ratio modes with +/- EV adjustments.
- High speed sync – shutter speeds up to 1/8000 sec.
- Second curtain sync functions.
- Remote flash head zoom adjustments – auto or manual
The Mitros+ will control and trigger other Mitros+ flashes in receiver mode or Phottix Odin Receivers.
Like the Phottix Odin, the Mitros+ with a backlit LCD, is intuitive, and easy to use and understand.
Strato Functionality
The Mitros+ has a built-in Strato II Multi-compatible receiver. Existing Strato II Multi transmitter can trigger the Mitros+. The Mitros+ can also trigger Strato II Multi and Strato I Receivers when set in Odin Transmit Mode.
Memory Functions
New with the Mitros+, built-in three location memory save and retrieval functions. Flash set up and custom function information can be saved in the Mitros+’s memory and be quickly recalled when needed. Use the Mitros+ in different modes for different situations? Quickly recall saved set-ups for fast use.
Phottix Mitros+ TTL Transceiver Flash for Sony (ISO Hot Shoe)
$ 259.95 - Sold Out
Phottix Mitros+ TTL Transceiver Flash for Sony (ISO Hot Shoe)
Phottix SKU: PH80384 | Helix SKU: PH80384
Overview
The Phottix Mitros+ TTL Transceiver Flash is the best of Phottix’s gold-standard products all-in-one. A flash with Phottix Odin Transmitter and Receiver, and Strato receiver all built in, and the new Sony ISO Hot Shoe.
Features
- GN: 58 Sony-Compatible TTL Flash
- Built-in: Phottix Odin Transmitter and Receiver, and Strato II Receiver
- Sony-compatible Master/Slave IR Triggering Modes
- TTL, Manual and Multi Stroboscopic Modes
- High Speed Sync and Second Curtain Sync
- AF Assist Light
- Flash Zoom: 24-105mm
- 3.5mm Sync Port
- Quick Flash Mode
The Phottix Mitros+ TTL Transceiver Flash is the best of Phottix’s gold-standard products all-in-one.
What’s the + ?
+ Built-in Odin Transmitter
+ Built-in Odin Receiver
+ Built-in Strato Receiver
+ Memory Functions
The Phottix Mitros is a powerful and durable hot shoe flash that has proven popular since it’s release earlier this year. The Phottix Mitros+ adds significant functionality, allowing photographers to not only use the Mitros on or off camera for lighting, but to also control and trigger remote flash by radio signal. The Mitros+ is an industry landmark and was developed with input from wedding and event photographers.
Use the Mitros+ on-camera as a key or fill light, as well as control and trigger other Mitros+ flashes or compatible flashes using Phottix Odin Receivers. The Mitros+ also offers a built-in Phottix Odin Receiver and Strato II Receiver. Existing Phottix triggers, like the Phottix Odin or Strato II can be used to trigger the Mitros+ without extra receivers.
Odin Functionality
With the Phottix Odin’s functionality built-in the Mitros+ can be used to trigger Phottix Odin and Strato Receivers. Likewise: you can also trigger the Mitros+ using a Phottix Odin TCU or Strato II Multi Transmitter.
Using the Mitros+ in Odin Transmitter Mode provides the same functions found on the Phottix Odin, including:
- Remote power control of groups in TTL with +/- EV adjustments (3 stops in 1/3 stop increments - 18 different levels)
- Remote power control in Manual Mode: Full power to 1/128 in 1/3 stop increments.
- Mix TTL and Manual flash – fire some groups in TTL, others as manual.
- Remote power control in A:B ratio modes with +/- EV adjustments.
- High speed sync – shutter speeds up to 1/8000 sec.
- Second curtain sync functions.
- Remote flash head zoom adjustments – auto or manual
The Mitros+ will control and trigger other Mitros+ flashes in receiver mode or Phottix Odin Receivers.
Like the Phottix Odin, the Mitros+ with a backlit LCD, is intuitive, and easy to use and understand.
Strato Functionality
The Mitros+ has a built-in Strato II Multi-compatible receiver. Existing Strato II Multi transmitter can trigger the Mitros+. The Mitros+ can also trigger Strato II Multi and Strato I Receivers when set in Odin Transmit Mode.
Memory Functions
New with the Mitros+, built-in three location memory save and retrieval functions. Flash set up and custom function information can be saved in the Mitros+’s memory and be quickly recalled when needed. Use the Mitros+ in different modes for different situations? Quickly recall saved set-ups for fast use.
What’s in the Box?
- Flash
- Flash bag
- 3.5mm to 3.5mm cable
- USB cable
- Flash stand
- Diffuser
- Manual (USB drive)
- QC certificate
- Quick-Start guide card
- Warranty card
Specifications
| Power | Four size-AA alkaline or Ni-MH batteries, compatible external battery pack. |
| Modes | TTL, Manual, and Multi Stroboscopic |
| Zoom | Auto and Manual Adjustments |
| Guide No | 58/190 (at 105mm focal length, ISO 100 in meters/feet) |
| Flash coverage | 24-105mm (14mm with wide angle diffuser panel) |
| Rotation | 180 degrees both directions, Up-Down: -7 to 90 degrees. |
| FEC (Flash exposure compensation) | Manual |
| FEB (Flash exposure bracketing) | ±3 stops in 1/3 stop increments (Manual flash exposure compensation and FEB can be combined) |
| Sync modes | First Curtain Sync, Second Curtain Sync, and High Speed Sync |
| Stroboscopic flash | Frequency:1-199Hz Number of flashes: 1-100 |
| Flash exposure confirmation | Blue LED lamp lights up in TTL mode |
| Recycling time/Flash-ready indicator | Normal flash: Approx.0.1-5 sec./Red LED indicator lamp lights up. Quick flash: Approx.0.1-2.5 sec./Green LED indicator lamp lights up. |
| Power saving | Non-wireless slave modes: 90 seconds, Wireless slave mode: (programmable) 10 minutes or 60 minutes |
Wireless flash
| Transmission method | Radio Frequency and Optical pulse |
| Channels | 4 |
| Wireless options: | Odin Tx, Odin Rx, Strato II Rx, OP Tx (Master), OP Rx (Slave), OP Slave, OFF |
| Transmission range (Approx.) | Radio: 100m +, Optical: Indoors: 12-16m/39.3-52.4 ft., Outdoors: 7-9m/22.9-29.5 ft. |
| Reception angle | Radio: 360 ° all directions, Optical transmission:±40°(horizontal)，±30°(vertical) |
| Controlled groups | 3 (A, B, and C) |
| Flash ratio control | 1:8-1:1-8:1 |
| Standby current | ≤100uA in sleep mode |
| Dimensions | (L x W x H): 202.8×77.5×58.3 mm |
| Weight | 427g (flash only, excluding batteries) |
ProMaster 100SL Speedlight for Canon
$ 149.95
ProMaster 100SL Speedlight for Canon
ProMaster SKU: 6354 | Helix SKU: PR6354
Overview
The ProMaster 100SL for Canon sports a full complement of advanced features in a small form factor. Its hybrid design gives you the option of an LED light for videos or flash for still photos. The 100SL is well-balanced so it 'just feels right' on your camera while throwing a flattering quality of light towards your subject. Use it in a wireless flash system as a master or slave unit. You can even use the 100SL to remotely fire your camera!
The 100SL for Canon features include:
- LED light for videography
- Remote camera triggering
- Swivel and bounce
- 22 levels of light output control
- HSS high-speed sync
- Thermal cut-off protection
- Quick release camera connection
- Wireless Master/Slave TTL functionality
- 1st and 2nd curtain sync
- Stroboscopic mode
- Flash exposure bracketing
Specifications
- Guide number: 100 (100' / 30 m at extended/50 mm reflector position, ISO 100)
- Bounce positions: 0o, 60o, 75o, 90o
- Swivel positions: Right 0o - 90o; Left 0o - 180o
- Flash coverage: 24 - 50 mm (manual)
- Flash duration: 1/800 - 1/20,000 second
- Color temperature: 5600 K
- Exposure compensation: +/- 3 EV in 1/3 EV increments
- Master/Slave mode: Optical pulse with 3 groups, 4 channels
- Recycling time: Alkaline cells 0.27 - 5 seconds; NiMH cells 0.15 - 2 seconds
- Dimensions: 5 1/2" x 2 3/4" x 2" / 140 mm x 70 mm x 50 mm
- Weight: 9 3/4 oz / 27 g (without batteries)
- Power source: 4 x 1.5 V AA alkaline batteries or 4 x 1.2 V NiMH batteries
ProMaster 100SL Speedlight for Fuji X
$ 149.95
ProMaster 100SL Speedlight for Fuji X
ProMaster SKU: 1700 | Helix SKU: PR1700
Overview
The ProMaster 100SL for Fuji X sports a full complement of advanced features in a small form factor. Its hybrid design gives you the option of an LED light for videos or flash for still photos. The 100SL is well-balanced so it 'just feels right' on your camera while throwing a flattering quality of light towards your subject. A built-in USB port is useful for future firmware upgrades. The 100SL for Fuji X can also be used as a wireless manual slave flash.
The 100SL for Fuji X features include:
+ LED light for videography
+ LED catchlight for still photography
+ Swivel and bounce
+ 22 levels of light output control
+ Auto FP (HSS) high-speed sync (with supporting cameras)
+ Thermal cut-off protection
+ Quick release camera connection
+ Wireless manual functionality (non-TTL)
+ 1st and 2nd curtain sync
+ Stroboscopic Mode
Specifications
- Guide number: 100 (100' / 30m at extended/50 mm reflector position, ISO 100)
- Bounce positions: 0o, 60o, 75o, 90o
- Swivel positions: Right 0o - 90o; Left 0o - 180o
- Flash coverage: 24 - 50 mm (manual)
- Flash duration: 1/800 - 1/20,000 second
- Color temperature: 5600 K
- Exposure compensation: +/- 5 EV in 1/3 EV increments
- Recycling time: Alkaline cells 0.27 - 5 seconds; NiMH cells 0.15 - 2 seconds
- Dimensions: 5 1/2" x 2 3/4" x 2" / 140 mm x 70 mm x 50 mm
- Weight: 9 3/4 oz / 27 g (without batteries)
- Power source: 4 x 1.5 V AA alkaline batteries or 4 x 1.2 V NiMH batteries
ProMaster 100SL Speedlight for Nikon
$ 149.95
ProMaster 100SL Speedlight for Nikon
ProMaster SKU: 6361 | Helix SKU: PR6361
Overview
The ProMaster 100SL for Nikon sports a full complement of advanced features in a small form factor. Its hybrid design gives you the option of an LED light for videos or flash for still photos. The 100SL is well-balanced so it 'just feels right' on your camera while throwing a flattering quality of light towards your subject. Use it in a wireless flash system as a master or slave unit. You can even use the 100SL to remotely fire your camera!
The 100SL for Nikon features include:
- LED light for videography
- Remote camera triggering
- Swivel and bounce
- 22 levels of light output control
- HSS high-speed sync
- Thermal cut-off protection
- Quick release camera connection
- Wireless Master/Slave TTL functionality
- 1st and 2nd curtain sync
- Stroboscopic mode
- Flash exposure bracketing
Specifications
- Guide number: 100 (100' / 30 m at extended/50 mm reflector position, ISO 100)
- Bounce positions: 0o, 60o, 75o, 90o
- Swivel positions: Right 0o - 90o; Left 0o - 180o
- Flash coverage: 24 - 50 mm (manual)
- Flash duration: 1/800 - 1/20,000 second
- Color temperature: 5600 K
- Exposure compensation: +/- 3 EV in 1/3 EV increments
- Master/Slave mode: Optical pulse with 3 groups, 4 channels
- Recycling time: Alkaline cells 0.27 - 5 seconds; NiMH cells 0.15 - 2 seconds
- Dimensions: 5 1/2" x 2 3/4" x 2" / 140 mm x 70 mm x 50 mm
- Weight: 9 3/4 oz / 27 g (without batteries)
- Power source: 4 x 1.5 V AA alkaline batteries or 4 x 1.2 V NiMH batteries
ProMaster 100SL Speedlight for Sony (M.I.S.)
$ 149.95
ProMaster 100SL Speedlight for Sony (M.I.S.)
ProMaster SKU: 8377 | Helix SKU: PR8377
Overview
The ProMaster 100SL for Sony sports a full complement of advanced features in a small form factor. Its hybrid design gives you the option of an LED light for videos or flash for still photos. The 100SL is well-balanced so it 'just feels right' on your camera while throwing a flattering quality of light towards your subject. Use it in a wireless flash system as a master or slave unit. You can even use the 100SL to remotely fire your camera!
The 100SL for Sony features include:
- LED light for videography
- Remote camera triggering
- Swivel and bounce
- 22 levels of light output control
- HSS high-speed sync
- Thermal cut-off protection
- Quick release camera connection
- Wireless Master/Slave TTL functionality
- 1st and 2nd curtain sync
- Stroboscopic mode
- Flash exposure bracketing
Specifications
- Guide number: 100 (100' / 30 m at extended/50 mm reflector position, ISO 100)
- Bounce positions: 0o, 60o, 75o, 90o
- Swivel positions: Right 0o - 90o; Left 0o - 180o
- Flash coverage: 24 - 50 mm (manual)
- Flash duration: 1/800 - 1/20,000 second
- Color temperature: 5600 K
- Exposure compensation: +/- 3 EV in 1/3 EV increments
- Master/Slave mode: Optical pulse with 3 groups, 4 channels
- Recycling time: Alkaline cells 0.27 - 5 seconds; NiMH cells 0.15 - 2 seconds
- Dimensions: 5 1/2" x 2 3/4" x 2" / 140 mm x 70 mm x 50 mm
- Weight: 9 3/4 oz / 27 g (without batteries)
- Power source: 4 x 1.5 V AA alkaline batteries or 4 x 1.2 V NiMH batteries
ProMaster 170SL Speedlight for Canon
$ 189.95
ProMaster 170SL Speedlight for Canon- PR2029
The ProMaster 170SL Speedlight works with your camera to add light where you want it. It automatically adjusts its exposure and light beam to match your camera and lens settings. The articulating head can be adjusted for a variety of swivel and bounce positions; and is compatible with many light modifiers. The 170SL's powerful guide number of 52m/171ft combined with 180mm zoom head can illuminate subjects from afar. The built-in wireless TTL system provides expanded off-camera lighting options (functions as a master of slave).
• Durable tilt / swivel head
• Quick release locking foot
• Durable high voltage battery port
• High quality buttons and switches
• High grade zoom motors and capacitors
• Custom designed 2-lens flash head for best quality of light
The 170SL is a speedlight that can grow with a photographer. Advanced users can explore features such as: Rear Curtain Sync RPT (stroboscopic) mode Flash exposure bracketing Wireless flash photography that integrates with either Nikon or Canon’s optical pulse systems (non-RT) Includes a custom designed case with storage for 4 spare batteries
Guide Number: (ISO 100) 52 m/ 170' at 180mm reflector position
Flash Coverage: 24-180mm (18mm with wide panel)
Auto/Manual Zoom
Bounce/Swivel Flash Head
Bounce Position (degrees): -7, 0, 45, 60, 75, 90
Swivel Position (degrees): Right 0-180, Left 0-90
Built-in wide panel (18mm) and bounce reflector
Flash Duration: 1/800-1/20,000 second
Color Temperature: 5600K
Exposure Compensation: +/-3 EV
Master/Slave Mode: Optical pulse with 3 groups, 4 channels
Recycling Time: Alkaline cells 0.2-4.55; NiMH cells 0.15-2.5 seconds
Net Weight: 14 oz/396 g (without batteries)
Dimensions: 7 3/4" x 3 1/16" x 2 5/16" (196.8mm x 77.8mm x 58.7mm)
Power Source: 4 x 1.5V AA alkaline batteries, 4 x 1.2V NiMH batteries, optional HV external power source
ProMaster 170SL Speedlight for Nikon
$ 189.95
ProMaster 170SL Speedlight for Nikon - PR2057
The ProMaster 170SL Speedlight works with your camera to add light where you want it. It automatically adjusts its exposure and light beam to match your camera and lens settings. The articulating head can be adjusted for a variety of swivel and bounce positions; and is compatible with many light modifiers. The 170SL's powerful guide number of 52m/171ft combined with 180mm zoom head can illuminate subjects from afar. The built-in wireless TTL system provides expanded off-camera lighting options (functions as a master of slave).
• Durable tilt / swivel head
• Quick release locking foot
• Durable high voltage battery port
• High quality buttons and switches
• High grade zoom motors and capacitors
• Custom designed 2-lens flash head for best quality of light
The 170SL is a speedlight that can grow with a photographer. Advanced users can explore features such as: Rear Curtain Sync RPT (stroboscopic) mode Flash exposure bracketing Wireless flash photography that integrates with either Nikon or Canon’s optical pulse systems (non-RT) Includes a custom designed case with storage for 4 spare batteries
Guide Number: (ISO 100) 52 m/ 170' at 180mm reflector position
Flash Coverage: 24-180mm (18mm with wide panel)
Auto/Manual Zoom
Bounce/Swivel Flash Head
Bounce Position (degrees): -7, 0, 45, 60, 75, 90
Swivel Position (degrees): Right 0-180, Left 0-90
Built-in wide panel (18mm) and bounce reflector
Flash Duration: 1/800-1/20,000 second
Color Temperature: 5600K
Exposure Compensation: +/-3 EV
Master/Slave Mode: Optical pulse with 3 groups, 4 channels
Recycling Time: Alkaline cells 0.2-4.55; NiMH cells 0.15-2.5 seconds
Net Weight: 14 oz/396 g (without batteries)
Dimensions: 7 3/4" x 3 1/16" x 2 5/16" (196.8mm x 77.8mm x 58.7mm)
Power Source: 4 x 1.5V AA alkaline batteries, 4 x 1.2V NiMH batteries, optional HV external power source
ProMaster 170SL Speedlight for Sony M.I.S.
$ 189.95
ProMaster 170SL Speedlight for Sony M.I.S.
ProMaster SKU: 8469 | Helix SKU: PR8469
Overview
The ProMaster 170SL Speedlight works with your camera to add light where you want it. It automatically adjusts its exposure and light beam to match your camera and lens settings. The articulating head can be adjusted for a variety of swivel and bounce positions; and is compatible with many light modifiers. The 170SL's powerful guide number of 52m/171ft combined with 180mm zoom head can illuminate subjects from afar. The built-in wireless system provides expanded off-camera lighting options. Wireless manual functionality is non-TTL (F1 and F2 modes)
+ Durable tilt / swivel head
+ Quick release locking foot
+ Durable high voltage battery port
+ High quality buttons and switches
+ High grade zoom motors and capacitors
+ Custom designed 2-lens flash head for best quality of light
The 170SL is a speedlight that can grow with a photographer. Advanced users can explore features such as:
+ Rear Curtain Sync
+ RPT (stroboscopic) mode
+ Flash exposure bracketing
+ Wireless manual functionality (non-TTL)
Includes a custom designed case with storage for 4 spare batteries
Specifications
- Guide Number: (ISO 100) 52 m/ 170' at 180mm reflector position
- Maximum output power: 400 lx-s at 10' / 3m (at 180mm zoom position)
- Flash Coverage: 24-180mm (18mm with wide panel)
- Auto/Manual Zoom
- Bounce/Swivel Flash Head
- Bounce Position (degrees): -7, 0, 45, 60, 75, 90
- Swivel Position (degrees): Right 0-180, Left 0-90
- Built-in wide panel (18mm) and bounce reflector
- Flash Duration: 1/800-1/20,000 second
- Color Temperature: 5600K
- Exposure Compensation: +/-3 EV
- Slave Mode: Optical F1 and F2 modes (non-TTL)
- Recycling Time: Alkaline cells 0.2-4.55; NiMH cells 0.15-2.5 seconds
- Net Weight: 14 oz/396 g (without batteries)
- Dimensions: 7 3/4" x 3 1/16" x 2 5/16" (196.8mm x 77.8mm x 58.7mm)
- Power Source: 4 x 1.5V AA alkaline batteries, 4 x 1.2V NiMH batteries, optional HV external power source
ProMaster 200SL Speedlight for Nikon
$ 149.95 - Sold Out
ProMaster 200SL Speedlight for Nikon
ProMaster SKU: 4653 | Helix SKU: PR4653
Overview
The ProMaster 200SL Speedlight for Nikon has tremendous power to light your subject from up to 200' away. The ProMaster 200SL integrates with your Nikon camera's metering system automatically for perfect exposures. It also works with your camera's advanced functions for creative lighting control.
The 200SL's wireless TTL abilities provide ultimate flash freedom and advanced multi-light options. A quality storage case is included which holds the 200SL along with spare AA batteries so you won't run out of power.
Specifications
- Guide Number: (ISO 100) 60m/200' at 180mm reflector position
- Bounce Position: -7º, 0º, 45º, 60º, 75º, 90º
- Swivel Position: Right 0º - 180º; Left 0º - 90º
- Flash Coverage: 24 - 180mm (18mm with wide panel)
- Auto/Manual zoom
- Built-in wide panel (18mm) and bounce reflector
- Flash Duration: 1/800 - 1/20,000 second
- Color Temperature: 5600K
- Exposure Compensation: +/-6 EV in 1/3 EV increments
- Master/Slave Mode: Optical pulse with 3 groups, 4 channels
- Recycling Time: Alkaline cells 0.27-5.25; NiMh cells 0.15-3 seconds
- Net Weight: 15oz / 425g (without batteries)
- Dimensions: 7 3/4" x 3 1/16" x 2 5/16" (196.8mm x 77.8mm x 58.7mm)
ProMaster 200ST-R Speedlight & ST1C TTL Trigger Kit - Canon
$ 279.95
ProMaster 200ST-R Speedlight & ST1C TTL Trigger Kit - Canon
ProMaster SKU: 9967 | Helix SKU: PR99671
Overview
The ProMaster 200ST-R Speedlight works with your camera to provide powerful light, TTL exposure, and a wide range of advanced features including HSS high-speed sync, second curtain sync, and more. The articulating head can be adjusted for a variety of swivel and bounce positions; and is compatible with many light modifiers. The 200ST-R's powerful guide number of 60m/200ft combined with 200mm zoom head can illuminate subjects from afar. The built-in wireless 2.4 GHz radio TTL system provides expanded off-camera lighting options when commanded by a ProMaster ST1 transceiver. Wireless non-TTL (F1 and F2 modes) optical slave is also on-board.
Specifications
+ Guide Number: (ISO 100) 60 m / 200’ at 200 mm zoom head position
+ Flash Coverage: 24 - 200 mm (18 mm with built-in wide panel) Auto/Manual Zoom
+ Bounce / Swivel Flash Head
Bounce Positions: -7º, 0º, 45º, 60º, 75º, 90º
Swivel Positions: Right 0º, 30º, 60º, 90º, 120º, 150º, 180º ;
Left 0º, 30º, 60º, 90º
+ Manual Output Power Range: 1 - 1/128
+ Flash Duration: 1/800 - 1/20,000 second
+ Color Temperature: 5600K
+ Exposure Compensation: +/- 3 EV in 1/3 EV increments
+ Wireless Slave Mode: 2.4 GHz radio, 15 channels + auto, 5 groups A/B/C/D/E
+ Wireless Range: 325’ / 100 m
+ Recycling Time: Alkaline cells 0.27 - 5.2 s ; NiMH cells 0.15 - 3 seconds
+ Net Weight: 15 oz / 425 g (without batteries)
+ Dimensions: 7 ¾" x 3 1/16 " x 2 5/16" (196.8mm x 77.8mm x 58.7mm)
+ Power Source: 4 x 1.5V AA alkaline batteries, 4 x 1.2V NiMH
batteries, optional HV external power supply
+ Maximum output power: 500 lx-s at 10' / 3m (at 200mm zoom position)
+ ProMaster 3717 USB firmware downloading cable for computer connection
Item Includes
Flash Case
Flash Stand
Flash Diffuser
Fluorescent Filter (Green)
Incandescent Filter (Amber)
Instruction Manual
ProMaster 200ST-R Speedlight & ST1N TTL Trigger Kit - Nikon
$ 279.95
ProMaster 200ST-R Speedlight & ST1N TTL Trigger Kit - Nikon
ProMaster SKU: 9974 | Helix SKU: PR99749
Overview
The ProMaster 200ST-R Speedlight works with your camera to provide powerful light, TTL exposure, and a wide range of advanced features including HSS high-speed sync, second curtain sync, and more. The articulating head can be adjusted for a variety of swivel and bounce positions; and is compatible with many light modifiers. The 200ST-R's powerful guide number of 60m/200ft combined with 200mm zoom head can illuminate subjects from afar. The built-in wireless 2.4 GHz radio TTL system provides expanded off-camera lighting options when commanded by a ProMaster ST1 transceiver. Wireless non-TTL (F1 and F2 modes) optical slave is also on-board.
Specifications
+ Guide Number: (ISO 100) 60 m / 200’ at 200 mm zoom head position
+ Flash Coverage: 24 - 200 mm (18 mm with built-in wide panel) Auto/Manual Zoom
+ Bounce / Swivel Flash Head
Bounce Positions: -7º, 0º, 45º, 60º, 75º, 90º
Swivel Positions: Right 0º, 30º, 60º, 90º, 120º, 150º, 180º ;
Left 0º, 30º, 60º, 90º
+ Manual Output Power Range: 1 - 1/128
+ Flash Duration: 1/800 - 1/20,000 second
+ Color Temperature: 5600K
+ Exposure Compensation: +/- 3 EV in 1/3 EV increments
+ Wireless Slave Mode: 2.4 GHz radio, 15 channels + auto, 5 groups A/B/C/D/E
+ Wireless Range: 325’ / 100 m
+ Recycling Time: Alkaline cells 0.27 - 5.2 s ; NiMH cells 0.15 - 3 seconds
+ Net Weight: 15 oz / 425 g (without batteries)
+ Dimensions: 7 ¾" x 3 1/16 " x 2 5/16" (196.8mm x 77.8mm x 58.7mm)
+ Power Source: 4 x 1.5V AA alkaline batteries, 4 x 1.2V NiMH
batteries, optional HV external power supply
+ Maximum output power: 500 lx-s at 10' / 3m (at 200mm zoom position)
+ ProMaster 3717 USB firmware downloading cable for computer connection
Item Includes
Flash Case
Flash Stand
Flash Diffuser
Fluorescent Filter (Green)
Incandescent Filter (Amber)
Instruction Manual
ProMaster 200ST-R TTL Speedlight - Canon
$ 239.95
ProMaster 200ST-R TTL Speedlight - Canon
ProMaster SKU: 8574 | Helix SKU: PR85742
Overview
The ProMaster 200ST-R Speedlight works with your camera to provide powerful light, TTL exposure, and a wide range of advanced features including HSS high-speed sync, second curtain sync, and more. The articulating head can be adjusted for a variety of swivel and bounce positions; and is compatible with many light modifiers. The 200ST-R's powerful guide number of 60m/200ft combined with 200mm zoom head can illuminate subjects from afar. The built-in wireless 2.4 GHz radio TTL system provides expanded off-camera lighting options when commanded by a ProMaster ST1 transceiver. Wireless non-TTL (F1 and F2 modes) optical slave is also on-board.
Specifications
+ Guide Number: (ISO 100) 60 m / 200’ at 200 mm zoom head position
+ Flash Coverage: 24 - 200 mm (18 mm with built-in wide panel) Auto/Manual Zoom
+ Bounce / Swivel Flash Head
Bounce Positions: -7º, 0º, 45º, 60º, 75º, 90º
Swivel Positions: Right 0º, 30º, 60º, 90º, 120º, 150º, 180º ;
Left 0º, 30º, 60º, 90º
+ Manual Output Power Range: 1 - 1/128
+ Flash Duration: 1/800 - 1/20,000 second
+ Color Temperature: 5600K
+ Exposure Compensation: +/- 3 EV in 1/3 EV increments
+ Wireless Slave Mode: 2.4 GHz radio, 15 channels + auto, 5 groups A/B/C/D/E
+ Wireless Range: 325’ / 100 m
+ Recycling Time: Alkaline cells 0.27 - 5.2 s ; NiMH cells 0.15 - 3 seconds
+ Net Weight: 15 oz / 425 g (without batteries)
+ Dimensions: 7 ¾" x 3 1/16 " x 2 5/16" (196.8mm x 77.8mm x 58.7mm)
+ Power Source: 4 x 1.5V AA alkaline batteries, 4 x 1.2V NiMH
batteries, optional HV external power supply
+ Maximum output power: 500 lx-s at 10' / 3m (at 200mm zoom position)
+ ProMaster 3717 USB firmware downloading cable for computer connection
Item Includes
Flash Case
Flash Stand
Flash Diffuser
Fluorescent Filter (Green)
Incandescent Filter (Amber)
Instruction Manual
ProMaster 200ST-R TTL Speedlight - Nikon
$ 239.95
ProMaster 200ST-R TTL Speedlight - Nikon
ProMaster SKU: 8581 | Helix SKU: PR85810
Overview
The ProMaster 200ST-R Speedlight works with your camera to provide powerful light, TTL exposure, and a wide range of advanced features including HSS high-speed sync, second curtain sync, and more. The articulating head can be adjusted for a variety of swivel and bounce positions; and is compatible with many light modifiers. The 200ST-R's powerful guide number of 60m/200ft combined with 200mm zoom head can illuminate subjects from afar. The built-in wireless 2.4 GHz radio TTL system provides expanded off-camera lighting options when commanded by a ProMaster ST1 transceiver. Wireless non-TTL (F1 and F2 modes) optical slave is also on-board.
Specifications
+ Guide Number: (ISO 100) 60 m / 200’ at 200 mm zoom head position
+ Flash Coverage: 24 - 200 mm (18 mm with built-in wide panel) Auto/Manual Zoom
+ Bounce / Swivel Flash Head
Bounce Positions: -7º, 0º, 45º, 60º, 75º, 90º
Swivel Positions: Right 0º, 30º, 60º, 90º, 120º, 150º, 180º ;
Left 0º, 30º, 60º, 90º
+ Manual Output Power Range: 1 - 1/128
+ Flash Duration: 1/800 - 1/20,000 second
+ Color Temperature: 5600K
+ Exposure Compensation: +/- 3 EV in 1/3 EV increments
+ Wireless Slave Mode: 2.4 GHz radio, 15 channels + auto, 5 groups A/B/C/D/E
+ Wireless Range: 325’ / 100 m
+ Recycling Time: Alkaline cells 0.27 - 5.2 s ; NiMH cells 0.15 - 3 seconds
+ Net Weight: 15 oz / 425 g (without batteries)
+ Dimensions: 7 ¾" x 3 1/16 " x 2 5/16" (196.8mm x 77.8mm x 58.7mm)
+ Power Source: 4 x 1.5V AA alkaline batteries, 4 x 1.2V NiMH
batteries, optional HV external power supply
+ Maximum output power: 500 lx-s at 10' / 3m (at 200mm zoom position)
+ ProMaster 3717 USB firmware downloading cable for computer connection
Item Includes
Flash Case
Flash Stand
Flash Diffuser
Fluorescent Filter (Green)
Incandescent Filter (Amber)
Instruction Manual
ProMaster 200ST-R TTL Speedlight - Sony M.I.S.
$ 249.95
ProMaster 200ST-R TTL Speedlight - Sony M.I.S.
ProMaster SKU: 8588 | Helix SKU: PR85889
Overview
The ProMaster 200ST-R Speedlight works with your camera to provide powerful light, TTL exposure, and a wide range of advanced features including HSS high-speed sync, second curtain sync, and more. The articulating head can be adjusted for a variety of swivel and bounce positions; and is compatible with many light modifiers. The 200ST-R's powerful guide number of 60m/200ft combined with 200mm zoom head can illuminate subjects from afar. The built-in wireless 2.4 GHz radio TTL system provides expanded off-camera lighting options when commanded by a ProMaster SM1S Speedlight Master Transmitter. Wireless non-TTL (F1 and F2 modes) optical slave is also on-board.
Specifications
+ Guide Number: (ISO 100) 60 m / 200’ at 200 mm zoom head position
+ Flash Coverage: 24 - 200 mm (18 mm with built-in wide panel) Auto/Manual Zoom
+ Bounce / Swivel Flash Head
Bounce Positions: -7º, 0º, 45º, 60º, 75º, 90º
Swivel Positions: Right 0º, 30º, 60º, 90º, 120º, 150º, 180º ;
Left 0º, 30º, 60º, 90º
+ Manual Output Power Range: 1 - 1/128
+ Flash Duration: 1/800 - 1/20,000 second
+ Color Temperature: 5600K
+ Exposure Compensation: +/- 3 EV in 1/3 EV increments
+ Wireless Slave Mode: 2.4 GHz radio, 15 channels + auto, 3 groups A/B/C (up to 15 units in a group)
+ Wireless Range: 325’ / 100 m
+ Recycling Time: Alkaline cells 0.27 - 5.2 s ; NiMH cells 0.15 - 3 seconds
+ Net Weight: 15 oz / 425 g (without batteries)
+ Dimensions: 7 ¾" x 3 1/16 " x 2 5/16" (196.8mm x 77.8mm x 58.7mm)
+ Power Source: 4 x 1.5V AA alkaline batteries, 4 x 1.2V NiMH batteries, optional HV external power supply
+ Maximum output power: 500 lx-s at 10' / 3m (at 200mm zoom position)
+ ProMaster 3717 USB firmware downloading cable for computer connection
Item Includes
Flash Case
Flash Stand
ProMaster 200ST-R TTL Speedlight - Sony M.I.S. with SM1S Transmitter Kit
$ 319.90
ProMaster 200ST-R TTL Speedlight - Sony M.I.S. with SM1S Transmitter Kit
ProMaster SKU: 8588 | Helix SKU: PR85889K
Overview
The ProMaster 200ST-R Speedlight works with your camera to provide powerful light, TTL exposure, and a wide range of advanced features including HSS high-speed sync, second curtain sync, and more. The articulating head can be adjusted for a variety of swivel and bounce positions; and is compatible with many light modifiers. The 200ST-R's powerful guide number of 60m/200ft combined with 200mm zoom head can illuminate subjects from afar. The built-in wireless 2.4 GHz radio TTL system provides expanded off-camera lighting options when commanded by a ProMaster SM1S Speedlight Master Transmitter. Wireless non-TTL (F1 and F2 modes) optical slave is also on-board.
Specifications
+ Guide Number: (ISO 100) 60 m / 200’ at 200 mm zoom head position
+ Flash Coverage: 24 - 200 mm (18 mm with built-in wide panel) Auto/Manual Zoom
+ Bounce / Swivel Flash Head
Bounce Positions: -7º, 0º, 45º, 60º, 75º, 90º
Swivel Positions: Right 0º, 30º, 60º, 90º, 120º, 150º, 180º ;
Left 0º, 30º, 60º, 90º
+ Manual Output Power Range: 1 - 1/128
+ Flash Duration: 1/800 - 1/20,000 second
+ Color Temperature: 5600K
+ Exposure Compensation: +/- 3 EV in 1/3 EV increments
+ Wireless Slave Mode: 2.4 GHz radio, 15 channels + auto, 3 groups A/B/C (up to 15 units in a group)
+ Wireless Range: 325’ / 100 m
+ Recycling Time: Alkaline cells 0.27 - 5.2 s ; NiMH cells 0.15 - 3 seconds
+ Net Weight: 15 oz / 425 g (without batteries)
+ Dimensions: 7 ¾" x 3 1/16 " x 2 5/16" (196.8mm x 77.8mm x 58.7mm)
+ Power Source: 4 x 1.5V AA alkaline batteries, 4 x 1.2V NiMH batteries, optional HV external power supply
+ Maximum output power: 500 lx-s at 10' / 3m (at 200mm zoom position)
+ ProMaster 3717 USB firmware downloading cable for computer connection
Item Includes
Flash Case
Flash Stand
ProMaster FL1 Professional TTL Flash - For Nikon
$ 149.95
Adding a whole new level of creativity, the ProMaster Professional FL1 has the power to light up subjects 60 yards away. It also features the custom controls to bounce, fill, and deliver the lighting you want, making it the last flash you’ll ever need.
Features:
- Built-in fill flash enhances foreground detail when using the main flash in the bounce mode
- Adjustable bounce angles and swivel mounted head give you more creative control over your lighting
- Motorized zoom head automatically responds to camera zoom to adjust flash power level to subject distance
- Choose the E-TTL/I-TTL mode for fully automatic flash or manual mode for total control
- Built-in wireless TTL and optical slave functions for the maximum flexibility in off camera flash
Specifications:
Guide Number: (ISO 100) 54m/180' at 105mm position
Bounce Position: -7º, 0º, 45º, 60º, 75º, 90º
Swivel Position: Right 0º-120º; Left 0º-180º
Flash Duration: 1/1,000-1/20,000 second
Slave Mode: Instant Sync & Pre-flash Suppression (S0-S3)
Recycling Time: 0.5-9 seconds
Net Weight: 10.6 oz / 300 g (without batteries)
Dimensions: 2 15/16" x 4 5/16" x 5 1/8" (75 x 110 x 130mm)
Power Source: 4x 1.5V AA alkaline batteries
Sony HVL-F20M
$ 149.99
Sony HVL-F20M Flash
Sony SKU: HVL-F20M | Helix SKU: SYHVLF20M
Overview
Compact, easy-to-use flash for advanced lighting
Compact and slim with a body that’s only 0.94" thick, but packed with advanced lighting features. Its guide number of 20 (GN203) makes it about two or three times brighter than a built-in flash. Powerful enough to illuminate subjects up to 16.4 feet away (TELE position, ISO 100, F4), it will expand your shooting possibilities.
Enjoy the bounce shooting
The flash light is diffused by being bounced off the ceiling, resulting in natural lighting with soft shadows. The flash position is easily adjusted via a slide switch. Simply rotating the flash head upwards 75 ° enables bounce flash for more natural-looking illumination of your subject.
Wireless control
Attach to a compatible camera and use this flash unit to wirelessly control other compatible flash units.
Common features for uncommon lighting techniques
Control the ideal combination of shutter speed and flash intensity for precisely the effect you are looking for.
Auto White Balance Adjustment (AWB)
Incorporates White Balance compensation based on color temperature information. Count on more accurate White Balance in flash photography.
Specifications
MAIN SPECIFICATIONS
| PRODUCT DESCRIPTION | SONY HVL-F20M - HOT-SHOE CLIP-ON FLASH |
| CAMERA FLASH | HOT-SHOE CLIP-ON FLASH |
| DIMENSIONS (WXDXH) | 2.4 IN X 0.9 IN X 4.5 IN |
| WEIGHT | 3.88 OZ |
| COLOR | BLACK |
| GUIDE NUMBER (M / ISO 100) | 20 |
| LENS COVERAGE | 27MM |
| SUPPORTED EXPOSURE CONTROL | TTL, ADI |
| FEATURES | WIRELESS OFF-CAMERA CONTROL |
| REQUIRED BATTERY | 2 X BATTERY - AAA TYPE |
| DESIGNED FOR | CYBER-SHOT DSC-HX60, RX10, RX1R, RX10; HANDYCAM FDR-AX30, AX33, AX40, AX55, AXP33, AXP35, AXP55, HDR-CX675, CX900, PJ620, PJ630, PJ670, PJ675, PJ800, PJ810, PJ820; A SLT-A65; A3000; A3500; A58; A6000; A6300; A6400; A6500; A68; A7; A7 II; A7 III; A77 II; A7R; A7R II; A7R III; A7S; A7S II; A9; A99 II |
EXTENDED SPECIFICATIONS
| GENERAL | |||||||||||||||||||||
|
|||||||||||||||||||||
| CAMERA FLASH | |||||||||||||||||||||
|
|||||||||||||||||||||
| MISCELLANEOUS | |||||||||||||||||||||
|
|||||||||||||||||||||
| POWER | |||||||||||||||||||||
|
|||||||||||||||||||||
| COMPATIBILITY INFORMATION | |||||||||||||||||||||
|
Item Includes
- Carrying pouch (1)
- Connector protect cap (1)
Sony HVL-F32M TTL Speedlight (M.I.S.)
$ 299.99
Sony HVL-F32M TTL Speedlight (M.I.S.)
Sony SKU: HVL-F32M | Helix SKU: SYHVLF32M
Overview
Slim, compact, and lightweight flash
Easy to store and carry thanks to its slim, compact and lightweight design. With a guide number of 32 (GN32), this powerful yet compact flash is the perfect size to fit E-mount cameras. It is convenient for everyday shooting and is easy to carry with its flat design.
Control your shadows with bounce flash
Bouncing the flash will reduce the shadow intensity and produce softer lighting.
Flash settings in plain sight
Flash mode and intensity settings are shown on the LCD panel, plus a warning display when the remaining charge gets too low.
Dust and moisture-resistant design
To ensure maximum reliability even in challenging conditions, especially outdoors, uniquely designed seals at joints around the body, LCD panel, mounting foot, and moving parts keep dust and moisture out.4
Common features for uncommon lighting techniques
Control the ideal combination of shutter speed and flash intensity for precisely the effect you are looking for.
Wireless / Remote HSS control
Flash photography is possible with the unit detached from the camera, enabling creation of shadows to add a sense of dimensionality and depth to the image.
High-speed sync (HSS)
Synched flash with high-speed shutter in Auto. Supports all shutter speeds and wireless operation.
Specifications
MAIN SPECIFICATIONS
| PRODUCT DESCRIPTION | SONY HVL-F32M - HOT-SHOE CLIP-ON FLASH |
| CAMERA FLASH | HOT-SHOE CLIP-ON FLASH |
| DIMENSIONS (WXDXH) | 2.6 IN X 3.2 IN X 4.7 IN |
| WEIGHT | 8.29 OZ |
| COLOR | BLACK |
| SUPPORTED EXPOSURE CONTROL | P-TTL, ADI |
| FLASH DURATION | 4.5 MS |
| COLOR TEMPERATURE | 5500K |
| RED-EYE REDUCTION | YES |
| REQUIRED BATTERY | 2 X BATTERY - AA TYPE |
| DESIGNED FOR | CYBER-SHOT DSC-RX10 III, DSC-RX1R II, RX10 IV; HANDYCAM FDR-AX30, FDR-AX40, FDR-AX55, FDR-AXP33, FDR-AXP35, FDR-AXP55; A SLT-A58; A3000; A3500; A6000; A6300; A6400; A6500; A68; A7; A7 II; A7 III; A77 II; A7R; A7R II; A7R III; A7S; A7S II; A9; A99 II |
EXTENDED SPECIFICATIONS
| GENERAL | |||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
| CAMERA FLASH | |||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
| POWER | |||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
| COMPATIBILITY INFORMATION | |||||||||||||||||||||||||||
|
Item Includes
- Connector protect cap (1)
- Mini-stand(1)
- Carrying case (1)
Sony HVL-F45RM TTL Speedlight (M.I.S.)
$ 399.99
Sony HVL-F45RM TTL Speedlight (M.I.S.)
Sony SKU: HVL-F45RM | Helix SKU: SYHVLF45RM
Overview
Powerful yet compact
Radio wireless flash control for versatile shooting
Supply powerful lighting with the compact high-performance HVL-F45RM clip-on flash. Explore freedom of built-in wireless radio control in multi-flash settings and conventional optical wireless communication. Easy operation, excellent reliability, expert results — especially for enthusiasts of compact α E-mount interchangeable-lens cameras.
Powerful compact with stamina
Dramatically downsized to fit the α E-mount cameras, this compact flash is as powerful as guide number 45. Recycle time is approx. 2.5 seconds, with flash output up to approx. 210 times.
Multi-flash shooting via built-in radio wireless
With its built-in wireless radio-controlled system, the versatile HVL-F45RM can be used as either commander or receiver, supporting a wide range of shooting situations. As a commander, connect up to 15 units of compatible flashes or receivers in up to 5 groups. You'll appreciate wireless convenience and varied lighting for flashes placed at distances of up to 98.4 feet.
Reliable and precise control in any setting
Radio signals enable stable connection over a wider shooting area (about 98.4 ft/30 m). Compatible off-camera flash units or receivers pick up radio signals — in bright light, around obstacles, and even when installed behind the camera. That means more consistent results without pairing errors.
Specifications
MAIN SPECIFICATIONS
| PRODUCT DESCRIPTION | SONY HVL-F45RM - HOT-SHOE CLIP-ON FLASH |
| CAMERA FLASH | HOT-SHOE CLIP-ON FLASH |
| DIMENSIONS (WXDXH) | 2.7 IN X 3.5 IN X 4.5 IN |
| WEIGHT | 11.18 OZ |
| GUIDE NUMBER (M / ISO 100) | 45 |
| LENS COVERAGE | 15MM - 105MM |
| SUPPORTED EXPOSURE CONTROL | TTL |
| COLOR TEMPERATURE | 5500K |
| ZOOM | AUTOMATIC |
| FEATURES | ILLUMINATED LCD DISPLAY, MODELING FLASH CAPABILITY, HIGH-SPEED SYNCHRONIZATION (HSS), FIRMWARE UPDATE VIA USB, WIRELESS RATIO CONTROL, BUILT-IN LED LIGHT |
| REQUIRED BATTERY | 4 X BATTERY - AA TYPE |
| DESIGNED FOR | CYBER-SHOT RX10 IV; A6300; A6400 ILCE-6400, ILCE-6400L, ILCE-6400M; A6500; A7 II; A7 III ILCE-7M3, ILCE-7M3K; A7R II; A7R III; A7S II; A9; A99 II |
EXTENDED SPECIFICATIONS
| GENERAL | ||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
| CAMERA FLASH | ||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
| MISCELLANEOUS | ||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
| POWER | ||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
| COMPATIBILITY INFORMATION | ||||||||||||||||||||||||||||||
|
Item Includes
- Connector protect cap (1)
- Mini-stand(1)
- Carrying case (1)
Sony HVL-F60RM TTL Speedlight (M.I.S.)
$ 599.99
Sony HVL-F60RM TTL Speedlight (M.I.S.)
Sony SKU: HVL-F60RM Helix SKU: SYHVLF60RM
Overview
High-output, high-speed flash with quick operation
The HVL-F60RM clip-on flash unit features high GN603 power, high-speed continuous shooting support and fast operation; ideal for advanced to professional users. Wireless radio commander/receiver functionality is included.
GN60 power and continuous shooting support
The high GN60 output and 220 times continuous emission of this flash unit provide plenty of power for various shooting.
Charge cycle time is 1.7 seconds4, or just 0.6 seconds4 with the External Battery Adaptor (FA-EBA1) (optional) for continuous shooting. Proper flash synchronization is maintained during continuous shooting, minimizing flash misfires and ruined shots.
Quick Shift Bounce and direct light output level button for smoother operation
Quick Shift Bounce allows use of the lighting features from horizontal to vertical
Quick Shift Bounce is Sony's original flash-head rotating mechanism, with the main unit tiltable from horizontal to vertical, allowing fast flash position changes. (90 ° left and right, 150 ° up/8 ° down)
Specifications
MAIN SPECIFICATIONS
| PRODUCT DESCRIPTION | SONY HVL-F60RM - HOT-SHOE CLIP-ON FLASH |
| CAMERA FLASH | HOT-SHOE CLIP-ON FLASH |
| DIMENSIONS (WXDXH) | 3.1 IN X 4.1 IN X 5.5 IN |
| WEIGHT | 15.84 OZ |
| GUIDE NUMBER (M / ISO 100) | 60 |
| LENS COVERAGE | 20MM - 200MM |
| SUPPORTED EXPOSURE CONTROL | TTL, P-TTL, ADI |
| FLASH DURATION | 2.8 MS |
| COLOR TEMPERATURE | 5500K |
| ZOOM | AUTOMATIC |
| FEATURES | AF ILLUMINATOR, ILLUMINATED LCD DISPLAY, FLASH +/- COMPENSATION, WIRELESS OFF-CAMERA CONTROL, HIGH-SPEED SYNCHRONIZATION (HSS), FIRMWARE UPDATE VIA USB, DUSTPROOF, REMOTE CAMERA TRIGGERING, BUILT-IN LED LIGHT, QUICK SHIFT BOUNCE, MOISTURE RESISTANT, MULTI FLASH RADIO CONTROL |
| REQUIRED BATTERY | 4 X BATTERY - AA TYPE |
| DESIGNED FOR | ?6300; A6400 ILCE-6400, ILCE-6400L, ILCE-6400M; A6500; A7 III ILCE-7M3, ILCE-7M3K |
EXTENDED SPECIFICATIONS
| GENERAL | |||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
| CAMERA FLASH | |||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
| MISCELLANEOUS | |||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
| POWER | |||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
| COMPATIBILITY INFORMATION | |||||||||||||||||||||||||||
|
Item Includes
Used Nikon SB-700 AF Speedlight
$ 229.97
Used Nikon SB-700 AF Speedlight
Nikon SKU: 4808 | Helix SKU: NK4808U
Includes: Original Box, Manuals, Flash Case, Flash Stand, Flash Diffuser & Color Correction Gels.
Condition: Like New.
