Benro Video Hi-Hat w/75mm Bowl HH75AV
$ 219.95 - Sold Out
Benro Video Hi-Hat w/75mm Bowl HH75AV
Benro SKU: HH75AV | Helix SKU: IDHH75AV
Overview
The Benro 75mm Hi-Hat is a versatile video production tool that allows for unique camera placement and comes in a portable package. This aluminumleg/magnesium bowl hi-hat can be placed low to the ground, on stairs or evensecured to a wooden board.
The small footprint allows the hi-hat to be used in tight spaces and onsmaller surface areas. Each leg can be independently positioned at one of thethree locks located on the outside of the bowl. In addition, each leg featuresoversized rubber twist locks and is telescoping for adjusting the height. When you combine these two features, you can easily set up the hi-hat for use onuneven terrain and even stairs.
The 75mm version will accept a 75mm video head and includes a 3/8"-16 low profile tie down adapter forgetting low to the ground shots. You can add a 75mm half-ball adapter (BL75) to mount any standard 3/8"-16 flat basevideo head or photo head. The large rubber feet are attached to a metal balljoint for quick positioning, which can be removed for attaching the includedmetal spiked feet. The feet also have pre-drilled holes for securing to woodenoctagon boards when using on top of apple boxes or securing the board to thetop of a ladder. There are three accessory mounts on the outside of the bowlcome in handy for attaching monitor arms. Each 3/8"-16 male to ¼"-20 female insert can be used to convertany standard ¼"-20 screw to 3/8"-16 in addition to being removed forattaching 3/8"-16 accessories. Transportingthe hi-hat is easy with the included carrying case.
Specifications
| MAXIMUM LOAD | 165 lb (75 kg) |
| MINIMUM HEIGHT | 3.1 in (8 cm) |
| MAXIMUM HEIGHT | 11 in (28 cm) |
| NUMBER OF LEG SECTIONS | 2 |
| INDEPENDENT LEG SPREAD | Yes-with 3 stops |
| WEIGHT | 2.8 lb (1.3 kg) |
Dot Line Flo Pod Video Stabilizer
$ 303.95
Dot Line Flo Pod Video Stabilizer
Dot Line SKU: RS-3124 | Helix SKU: DLRS3124
Overview
* Special Order *
Dot Line Flo Pod Video Stabilizer by RPS Studio
Nikon Wind Muff for Z30 Mirrorless Camera
$ 9.95 - Sold Out
Nikon Wind Muff for Z30 Mirrorless Camera
Nikon SKU: 13569 | Helix SKU: NK13569
Overview
The Z 30 Wind Muff is designed to sit on the hot shoe of the Z 30 and covers the camera’s stereo mic to suppress wind noise when shooting video.
UPC: 018208135691
ProMaster Audio Cable 2.5mm Male to 3.5mm Female - Coiled
$ 9.95
ProMaster Audio Cable 2.5mm Male to 3.5mm Female - Coiled
Mfr SKU: 25588 | Helix SKU: PR25588
Overview:
The audio cable is useful for adapting microphones having a 3.5mm male 3-pole cord to cameras using a smaller 2.5mm mic jack. It is a coiled cord approximately 1 foot in length when relaxed. The 2.5mm male portion connects to the camera while the 3.5mm femail portion connects to the microphones 3.5mm male cord.
ProMaster Audio Cable 2.5mm Male to 3.5mm Male - Coiled
$ 9.95
ProMaster Audio Cable 2.5mm Male to 3.5mm Male - Coiled
Mfr SKU: 25519 | Helix SKU: PR25519
Overview:
The audio cable is useful for connecting microphones having a 3.5mm female 3-pole port to cameras using a smaller 2.5mm mic jack. It is a coiled cord approximately 1 foot in length when relaxed.
ProMaster AXIS Mobile Stabilizer
$ 69.95 - Sold Out
ProMaster AXIS Mobile Stabilizer
ProMaster SKU: 6677 | Helix SKU: PR6677
Overview
Videos from your phone look their best when they are as steady as possible. The PROMASTER AXIS is your solution to eliminate the shake. This compact motorized stabilizer works with your phone to create smooth video footage. An internal rechargeable battery powers the Axis for hours. It can even recharge your phone's battery in a pinch! Whether or not you have a protective case on your phone, the Axis connects securely in just seconds. Its compact size means you can take it everywhere and record the best video memories of once in a lifetime events.
Axis Features include:
- Connects to most phones with or without a protective case
- Silent operation so you also get the best audio
- Built-in rechargeable battery runs for up to 8 hours of video
- Can serve as a 'power bank' by recharging your phone's internal battery
- Mounts anywhere via the built-in tripod mount
- Dust and light splash resistant to IP54 standards
Specifications
- Dimensions: 4 1/2" x 3 1/8" x 2 5/8" (115 mm x 79 mm x 66 mm)
- Weight: 7.6 oz / 215 g
- Internal battery capacity: 2600 mAh
- Run time on a full charge: approximately 8 hours
- Charging input: 5V 1.5A
- USB power output: 5V 1.5A
- Encasement protection: IP54
Includes:
- Axis phone stabilizer
- USB charging cable
- Additional grip handle
- Note: A USB cable is included for charging the Axis from a common USB-A port. For wall AC charging, a USB household adapter is required but no included.
RODE 3.5mm TRRS to TRRS patch 1.6m cable
$ 30.00 - Sold Out
RODE 3.5mm TRRS to TRRS patch 1.6m cable
Rode SKU: SC9 | Helix SKU: RMSC9
Overview
The SC9 is a high-quality 1.5m TRRS to TRRS cable for easy and reliable connection of smartphones to the RØDECaster Pro.
Specifications:
Connector-1 1 x 1/8" / 3.5 mm TRRS Male Straight
Connector-2 1 x 1/8" / 3.5 mm TRRS Male Straight
Cable Length 4.92' / 1.5 m
RODE Boompole Bag for Boompole, Shotgun Mic, Softie and Shock Mount
$ 39.95 - Sold Out
Designed to carry the Boompole with attached mic and shock mount.
| Weight | 575.00gm |
| Dimensions | 960.00mmH x 200.00mmW x 20.00mmD |
| Warranty | 1 year |
RODE DC to USB Power Cable
$ 20.00
RODE DC to USB Power Cable
Rode SKU: DC-USB1 | Helix SKU: RMDCUSB1
Overview
The DC-USB1 is a handy power adaptor for powering the RØDECaster Pro from any compatible USB output, making the console completely portable. A high-power (2.4A minimum) USB output is required for operation. Power bank is not included.
- Power Adapter for RODECaster Pro
- Use RODECaster Pro with 2.4mA USB Power
- Makes RODECaster Pro Portable
Specifications:
| Power Requirements | USB: 5 V, 2.4 mA DC: 12 V / 1 A |
RODE DS-1 Microphone Desk Stand
$ 29.99 - Sold Out
The DS1 is a weighted table top microphone stand.
RODE GN1 Flexible Gooseneck for NT-6 Microphone
$ 19.95 - Sold Out
Miniature (85mm) flexible goose neck for NT6. By using the GN1 with NT6 microphone stand you get an added height that allows you to have total control over the placement of the NT6.
RODE invisiLav Discreet Lavalier Mounting System (10-Pack)
$ 40.00 - Sold Out
Discreet skinsafe mount for lavalier microphones. Supports RODE Lavalier and smartLav. Pack of 10.
The RØDE invisiLav is designed to aid the concealing of the Lavalier and smartLav microphones. Its soft construction absorbs noise and vibration, while the wide, flat profile provides coverage from the elements and allows for versatile mounting. There's two mounting points in case a redundant mic is required, and cable management on the side. Available in either a pack of three or a bulk pack of ten, the invisiLav comes with pre-cut, skinsafe adhesive that can be used to stick the invisiLav to either the body or to fabric. The invisiLav itself is also made from a medical grade skin safe material so it can be mounted on the body without fear of irritation.
| Weight | 5.00gm |
| Dimensions | 18.00mmH x 25.00mmW x 6.00mmD |
| Warranty | 1 year |
RODE invisiLav Discreet Lavalier Mounting System (3-Pack)
$ 18.00 - Sold Out
Discreet skinsafe mount for lavalier microphones. Supports RODE Lavalier and smartLav. Pack of 3.
The RØDE invisiLav is designed to aid the concealing of the Lavalier and smartLav microphones. Its soft construction absorbs noise and vibration, while the wide, flat profile provides coverage from the elements and allows for versatile mounting. There's two mounting points in case a redundant mic is required, and cable management on the side. Available in either a pack of three or a bulk pack of ten, the invisiLav comes with pre-cut, skinsafe adhesive that can be used to stick the invisiLav to either the body or to fabric. The invisiLav itself is also made from a medical grade skin safe material so it can be mounted on the body without fear of irritation.
RODE iXY-L Stereo Microphone (Lightning Connector)
$ 199.00 - Sold Out
RODE iXY-L Stereo Microphone (Lightning Connector)
Rode SKU: iXY-L | Helix SKU: RMiXYL
Overview
Digital stereo microphone (up to 24/96K recording) for lightning-compatible Apple devices including iPhone 5, 5s & 5c. Supplied with carry case and windshield.
- Record stereo audio at 24-bit, 96kHz*
- Matched pair of 1/2" cardioid condenser capsules
- Metal casing for enhanced durability and electromagnetic interference immunity.
- Includes windshield, zip case
- Software-switchable 72Hz high pass filter for reduction of unwanted low frequency noise.
- iXY-L compatible with iPhone 5, iPhone 5s, iPhone 5c, iPhone 6 and iPhone 6plus.
- iXY-30PIN compatible with iPhone 4s and earlier
- Twelve month warranty
The RØDE i-XY is the ultimate recording microphone for iPhone® and iPad®. With up to 24-bit/96k* recording and on-board high-fidelity A/D conversion, your i-XY recordings are rich, smooth and accurate. At the heart of the i-XY is a matched pair of ½” cardioid condenser capsules, fixed in a perfect 90 degree ‘near-coincident’ alignment. This results in immersive and true-to-life stereo recordings, captured in incredibly high detail. Designed and manufactured in Australia, the i-XY is available in two versions - Lightning and 30-pin. The Lightning version supports the iPhone® 5s, iPhone® 5 and iPhone® 5c. The 30-pin version supports the iPhone® 4S, iPhone® 4, iPad® (3rd generation) and iPad® 2. A foam windshield is supplied for outdoor recording as well as a reinforced protective zip case to ensure your i-XY is available whenever you need it. *RØDE Rec or RØDE Rec LE app required for 24/96 quality. iPhone and iPad are trademarks of Apple Inc., registered in the U.S. and other countries.
Specifications
| Acoustic Principle | Pressure Gradient |
| Capsule | 0.50" |
| Polar Pattern |
 
|
| Address Type | End |
| Frequency Range | 20Hz - 20kHz |
| Output Impedance | 0Ω |
| Maximum SPL | 120dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Sensitivity | -42.0dB re 1 Volt/Pascal (8.52mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 18dB-A |
| Weight | 40.00gm |
| Dimensions | 46.00mmH x 55.00mmW x 40.00mmD |
| Warranty | 1 year |
What's in the Box
|
i-XY (Lightning Version) Stereo Microphone for Apple iPhone® & iPad® |
 |
Wind Shield |
 |
Zip Pod |
RODE MiCon Cable 1.2m (4') (Black)
$ 32.00 - Sold Out
The RØDE MiConTM connector system provides seamless integration between the RØDE HS1 headset and Lavalier microphones and a wide range of wireless systems. Like all MiConTM cables, this 1.2m (4') length is heavy-duty, shielded and Kevlar reinforced.
| Weight | 6.00gm |
| Dimensions | 1200.00mmH x 1.50mmW x 1.50mmD |
| Warranty | 1 year |
RODE MiCon Cable 1.2m (4') (Pink)
$ 32.00 - Sold Out
The RØDE MiConTM connector system provides seamless integration between the RØDE HS1 headset and Lavalier microphones and a wide range of wireless systems. Like all MiConTM cables, this 1.2m (4') length is heavy-duty, shielded and Kevlar reinforced.
| Weight | 6.00gm |
| Dimensions | 1200.00mmH x 1.50mmW x 1.50mmD |
| Warranty | 1 year |
RODE MiCon-1 Connector for RODE MiCon Microphones (Sennheiser)
$ 18.00
The RØDE MiConTM connector system provides seamless integration between the RØDE HS1 headset,PinMic and Lavalier microphones and a wide range of wireless systems. The MICON-1 is designed to connect to the Sennheiser transmitters SK 500 G3, SK 300 G3, SK 100 G3, SK 500 G2, SK 300 G2, SK 2 Freeport Sennheiser and the Sennheiser products listed are registered names and trademarks owned by Sennheiser.
RODE MiCon-10 Connector for MIPRO Devices
$ 23.00 - Sold Out
The RØDE MiConTM connector system provides seamless integration between the RØDE HS1 headset, PinMic and Lavalier microphones and a wide range of wireless systems. The MICON-10 is designed to connect to MIPRO transmitters with 4-pin mini XLR connector. MIPRO is a registered name and trademark owned by MIPRO Electronics.
| Weight | 10.00gm |
| Dimensions | 36.00mmH x 13.65mmW x 10.40mmD |
| Warranty | 1 year |
RODE MiCon-11 Connector for TRRS Devices & Smartphones
$ 23.00 - Sold Out
The RØDE MiConTM connector system provides seamless integration between the RØDE HS1 headset, PinMic and Lavalier microphones and a wide range of wireless systems. The MICON-11 is designed to connect to TRRS devices such as the iPhone, iPad, iPod touch and select Android devices.
| Weight | 7.00gm |
| Dimensions | 1200.00mmH x 9.00mmW x 9.00mmD |
| Warranty | 1 year |
RODE MiCon-2 Connector for 3.5mm Stereo Mini Jack (1v Min Pwr Supply)
$ 18.00
The RØDE MiConTM connector system provides seamless integration between the RØDE HS1 headset,PinMic and Lavalier microphones and a wide range of wireless systems. The MICON-2 is designed to connect to a standard 3.5mm stereo minijack, with a power supply of 1V minimum.
| Weight | 8.00gm |
| Dimensions | 37.00mmH x 10.00mmW x 10.00mmD |
| Warranty | 1 year |
RODE MiCon-3 Connector for RODE MiCon Microphones (Shure)
$ 23.00 - Sold Out
The RØDE MiConTM connector system provides seamless integration between the RØDE HS1 headset,PinMic and Lavalier microphones and a wide range of wireless systems. The MICON-3 is designed to connect to Shure transmitters UR1, UR1M, ULX1, SLX1, PGX1 and PG1. Shure and the Shure products listed are registered names and trademarks owned by Shure.
| Weight | 10.00gm |
| Dimensions | 36.00mmH x 13.65mmW x 10.40mmD |
| Warranty | 1 year |
RODE MiCon-4 Connector for RODE MiCon Microphones (Audio-Technica)
$ 27.00 - Sold Out
The RØDE MiConTM connector system provides seamless integration between the RØDE HS1 headset,PinMic and Lavalier microphones and a wide range of wireless systems. The MiCon-4 is designed to connect to Audio Technica UniPakTM Body-Pack transmitters 1800, 2000 and 3000. Audio Technica, Uni-Pak and the Audio Technica products listed are registered names and trademarks owned by Audio Technica.
| Weight | 13.00gm |
| Dimensions | 36.00mmH x 11.60mmW x 11.60mmD |
| Warranty | 1 year |
RODE MiCon-6 Connector for AKG PT40, PT60, PT61, PT80, PT400, PT2000, PT4000 and Audix RAD-360
$ 23.00 - Sold Out
The RØDE MiConTM connector system provides seamless integration between the RØDE HS1 headset,PinMic and Lavalier microphones and a wide range of wireless systems. The MICON-6 is designed to connect to AKG transmitters PT40, PT60, PT61, PT80, PT400, PT2000 and PT4000, as well as the Audix RAD-360. AKG, Audix and the AKG and Audix products listed are registered names and trademarks of their respective owners.
| Weight | 10.00gm |
| Dimensions | 36.00mmH x 13.00mmW x 10.50mmD |
| Warranty | 1 year |
RODE MiCon-7 Connector for RODE MiCon Microphones (Lectrosonics)
$ 23.00 - Sold Out
The RØDE MiConTM connector system provides seamless integration between the RØDE HS1 headset,PinMic and Lavalier microphones and a wide range of wireless systems. The MICON-7 is designed to connect to Lectrosonics transmitters SM Series, UMa Series, LMa Series and UM450. Lectrosonics and the Lectrosonics products listed are registered names and trademarks owned by Lectrosonics Inc.
| Weight | 10.00gm |
| Dimensions | 36.00mmH x 13.00mmW x 10.50mmD |
| Warranty | 1 year |
RODE MiCon-8 Connector for RODE MiCon Microphones (Sony UWP)
$ 18.00 - Sold Out
The RØDE MiConTM connector system provides seamless integration between the RØDE HS1 headset, PinMic and Lavalier microphones and a wide range of wireless systems. The MICON-8 is designed to connect to Sony UWP transmitters. Sony and the Sony products listed are registered names and trademarks owned by Sony Corp.
| Weight | 10.00gm |
| Dimensions | 39.00mmH x 10.00mmW x 10.00mmD |
| Warranty | 1 year |
RODE MiCon-9 Adapter Cable for Sennheiser SK500/2000/5000
$ 60.00 - Sold Out
The RØDE MiConTM connector system provides seamless integration between the RØDE HS1 headset,PinMic and Lavalier microphones and a wide range of wireless systems. The MICON-9 is designed to connect to the Sennheiser transmitters SK 2000 and SK 5000 Sennheiser and the Sennheiser products listed are registered names and trademarks owned by Sennheiser.
| Weight | 10.00gm |
| Dimensions | 1200.00mmH x 9.00mmW x 9.00mmD |
| Warranty | 1 year |
RODE Micro Boompole - 3-Section Boom Pole
$ 49.00 - Sold Out
- Precision balanced anodized aluminium construction
- New intuitive lock/release system
- Ergonomic grip handle
The RØDE Micro Boompole provides ultimate boom pole performance in a convenient and portable size. Intuitive twist locks allow the Micro Boompole’s three sections to smoothly extend to 2063mm (6¾’), while the ergonomic grip provides comfort during use.
| Weight | 396.00gm |
| Dimensions | 844.00mmH x 33.00mmW x 33.00mmD |
| Warranty | 1 year |
RODE Microphones RC5 Case for the NT5 Or NT55 Microphones with Accessories
$ 39.00 - Sold Out
A sturdy flight case designed to house a matched pair of NT5 or NT55 microphones with stand mounts and windshields
| Weight | 880.00gm |
| Dimensions | 300.00mmH x 350.00mmW x 100.00mmD |
| Warranty | 1 year |
RODE Microphones RM1 Stand Mount for S1, M2 Microphones (Replacement)
$ 14.99 - Sold Out
The RM1 mic clip effectively secures your microphone to its stand without interfering with its polarity or frequency response. Includes 3/8-5/8" adaptor.
| Weight | 92.00gm |
| Dimensions | 95.00mmH x 40.00mmW x 65.00mmD |
| Warranty | 1 year |
RODE MINIFUR HS1 Furry Wind Cover for HS1 Headset
$ 24.99 - Sold Out
The MINIFUR-HS1 is an artificial fur wind shield designed for us on the HS1 headset microphone in outdoor or high wind conditions. The MINIFUR-HS1 is supplied in a pack of three.
| Weight | 1.00gm |
| Dimensions | 26.00mmH x 44.00mmW x 44.00mmD |
| Warranty | 1 year |
RODE PSM1 Shock Mount for RODE Podcaster Microphone
$ 39.00 - Sold Out
RODE PSM1 Shock Mount for RODE Podcaster Microphone
The perfect suspension shock mount for the Procaster or Podcaster, the PSM1 provides isolation from external vibrations which can translate as low frequency noise or manipulate the microphone position. The PSM1 gives you confidence when using your microphone in environments where there is any movement that may interfere with the microphones performance.
| Weight | 390.00gm |
| Dimensions | 122.00mmH x 110.00mmW x 155.00mmD |
| Warranty | 1 year |
RODE RC1 Case for the NT-2000 Microphone
$ 39.00 - Sold Out
RODE RC1 Case for the NT-2000 Microphone
The RC1 is a rugged flight case designed to house the NT2000 and an SM2 shock mount.
| Weight | 1300.00gm |
| Dimensions | 330.00mmH x 40.00mmW x 170.00mmD |
| Warranty | 1 year |
RODE SC1 TRRS Extension Cable For SmartLav Microphone - 20'
$ 25.00 - Sold Out
RODE SC1 TRRS Extension Cable For SmartLav Microphone - 20'
The SC1 is a premium shielded extension cable for the smartLav and smartLav+ TRRS microphones. Measuring 6m/20', the SC1 features gold plated contacts for superior audio reproduction.
| Weight | 75gm |
| Dimensions | 6000mmH x 3mmW x 3mmD |
| Warranty | 1 year |
RODE Set of Eight Coloured XLR Rings
$ 10.00 - Sold Out
RODE Set of Eight Coloured XLR Rings
Rode SKU: XLR-ID | Helix SKU: RMXLRID
Overview
The XLR-ID is a set of eight colour-coded rings that can be affixed to any XLR plug, making them easier to identify and keep organised. The colours of the rings match the colours used for each of the microphone channels on the RØDECaster Pro.
- For RODECaster Pro
- Keep Track of Your XLR Cable
- Color-Coded Rings for XLR Connections
- 2 Green, Orange, Blue & Pink Rings
Specifications:
Dimensions: 0.4 x 0.3 x 0.7" / 1.0 x 0.8 x 1.9 cm
RODE Set of Four 3.5mm to 1/4 inch TRS Headphone Adaptors
$ 15.00 - Sold Out
RODE Set of Four 3.5mm to 1/4 inch TRS Headphone Adaptors
Rode SKU: HJA-4 | Helix SKU: RMHJA4
Overview
The HJA-4 is a pack of four high-quality adaptors for converting headphones with 3.5mm plugs (as used on most consumer models) for use with the RØDECaster Pro’s ¼-inch headphone outputs.
- 4 x 3.5mm to 1/4" Headphone Adapters
- Use Consumer Headphones with Pro Gear
- For RODECaster Pro
- For AI-1
Specifications:
Dimensions: 1.77 x 0.39 x 0.39" / 45 x 10 x 10 mm
RODE Tripod Mini Stand
$ 24.99 - Sold Out
A collapsible mini tripod designedfor mounting lightweight microphones that support 1/4" mounting. The tripod allows you to mount the microphone on any surface that will give you a concentrated and centralized location for picking up sound. It provides 360 degree rotation and a wide angle of vertical adjustment.
| Weight | 185.00gm |
| Dimensions | 195.00mmH x 175.00mmW x 175.00mmD |
| Warranty | 1 year |
Rode Vlogger Kit - iOS Edition for iOS devices
$ 149.00 - Sold Out
Rode Vlogger Kit - iOS Edition for iOS devices
Rode SKU: VLOGVMML | Helix SKU: RMVLOGVMML
Overview
The iOS Vlogger Kit contains everything you need to get professional results when filming using your iPhone. The VideoMic Me-L microphone connects directly to your device, delivering crisp, clear, directional sound for any application. The SmartGrip secures your device firmly in place for stable recording and connects seamlessly to the Tripod 2 for either handheld or tabletop use, while the MicroLED ensures all your shots are perfectly lit.
Key Features:
- Complete iPhone filmmaking kit
- Directional sound pickup to reduce background noise
- MicroLED light offers over four hours operation on a single charge
- Three-position tripod for handheld or static use
- Gimbal tripod head for accurate camera positioning
- All-metal mount with rubberised grips for phones 65mm to 85mm wide
- All-in-one mobile filmmaking kit, including a RØDE VideoMic, Tripod 2, SmartGrip, MicroLED and accessories
- Options for iOS (Lightning), Android (USB-C) devices and a Universal Edition (3.5mm)
- High-quality microphone that delivers professional sound in any recording situation
- Three-position tripod for either handheld or tabletop use
- MicroLED on-camera light with eight coloured filters for flawless shots
- Lightweight all-metal mount with rubberised grips, accommodates phones 65mm to 85mm wide
IN THE BOX:
- VideoMic Me-C Microphone
- Rubber Clip
- WS9 Windshield
- SmartGrip
- Tripod 2
- MicroLED On-camera Light
- Clip-on Diffuser
- 8 Coloured Filters
- USB-C Cable for recharging the MicroLED on-camera light
Rode Vlogger Kit - USB-C Edition for compatible phones
$ 149.00 - Sold Out
Rode Vlogger Kit - USB-C Edition for compatible phones
Rode SKU: VLOGVMMC | Helix SKU: RMVLOGVMMC
Overview
The USB-C Vlogger Kit contains everything you need to get professional results when filming using your USB-C equipped mobile phone. The VideoMic Me-C microphone connects directly to your device, delivering crisp, clear, directional sound for any application. The SmartGrip secures your device firmly in place for stable recording and connects seamlessly to the Tripod 2 for either handheld or tabletop use, while the MicroLED ensures all your shots are perfectly lit.
Key Features:
- Complete USB-C mobile fi lmmaking kit
- Directional sound pickup to reduce background noise
- MicroLED light offers over four hours operation on a single charge
- Three-position tripod for handheld or static use
- Gimbal tripod head for accurate camera positioning
- All-in-one mobile filmmaking kit, including a RØDE VideoMic, Tripod 2, SmartGrip, MicroLED and accessories
- Options for iOS (Lightning), Android (USB-C) devices and a Universal Edition (3.5mm)
- High-quality microphone that delivers professional sound in any recording situation
- Three-position tripod for either handheld or tabletop use
- MicroLED on-camera light with eight coloured filters for flawless shots
- Lightweight all-metal mount with rubberised grips, accommodates phones 65mm to 85mm wide
|
IN THE BOX
|
RØDE K2 - Variable Pattern Studio Tube Condenser Microphone
$ 699.00
RØDE K2 - Variable Pattern Studio Tube Condenser Microphone
RØDE SKU: K2 | Helix SKU: RMK2
Overview
Seamlessly variable dual 1" condenser valve microphone featuring continually variable polar pattern (omni through cardioid to figure 8).
- Large 1" capsule with gold sputtered diaphragm and internal shock mounting
- Ultra low noise
- Wide dynamic range
- Class ‘A’ valve circuitry
- Hand-selected and graded 6922 twin-triode valve
- Dedicated Power Supply
- High strength welded and heat-treated steel mesh head
- Continuously variable polar patterns. From omni, through cardioid to figure 8, controlled at the power supply.
- 10 year extended warranty when you register your microphone
The RØDE K2 is a premium valve condenser microphone featuring dual 1” gold sputtered diaphragms. Infinitely variable control of the polar pattern from omnidirectional through cardioid and bidirectional/figure-8 provides the freedom and flexibility to excel in any recording situation.
High-performance specifications (including a maximum SPL of 162dB) are combined with the character and subtleties of the legendary mics of the 1950s to provide a microphone that not only provides world-class vocals but is perfectly at home recording a wide range of instruments both up-close or in a wider ‘room’ capacity.
The RØDE K2 microphone is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.
Specifications
| Acoustic Principle | Pressure Gradient |
| Active Electronics | Valve/tube impedance converter with bipolar output buffer |
| Capsule | 1.00" |
| Polar Pattern |
 
|
| Address Type | Side |
| Frequency Range | 20Hz - 20kHz |
| Output Impedance | 200Ω |
| Maximum SPL | 162dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Maximum Output Level | 30.0mV |
| Sensitivity | -36.0dB re 1 Volt/Pascal (16.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 10dB-A |
| Power Options |  |
| Weight | 815.00gm |
| Dimensions | 208.00mmH x 55.00mmW x 55.00mmD |
| Output |  |
| Warranty | 1 year with free extension to 10 years following registration |
Sony Stereo Mic For Multi-Interface Shoe (ECM-XYST1M)
$ 199.99
Sony Stereo Mic For Multi-Interface Shoe (ECM-XYST1M)
Sony SKU: ECM-XYST1M | Helix SKU: SYECMXYST1M
Overview
Features:
- Works with the Sony Multi-Interface Shoe
- Compatible with Sony Handycam Camcorders
- Compatible with Sony Cyber-Shot Cameras
- Compatible with Sony Alpha/NEX Cameras
- 70 Hz to 20 kHz Frequency Response
- Includes Windscreen, Pouch & Audio Cable
Compatible with:
FDR-AX700/FDR-AX53/HDR-CX455/HDR-CX675/FDR-AX33/HDR-PJ670/FDR-AX100/HDR-CX900/HDR-PJ540/HDR-PJ810/HDR-MV1/HDR-CX380/HDR-CX430V/HDR-PJ380/HDR-PJ430V/HDR-PJ650V/HDR-PJ790V/HDR-TD30V/HDR-CX260V/HDR-CX580V/HDR-CX760V/HDR-PJ260V/HDR-PJ580V/HDR-PJ710V/HDR-PJ760V/HDR-TD20V/HDR-XR260V/HDR-CX160/HDR-CX360V/HDR-CX560V/HDR-CX700V/HDR-PJ10/HDR-PJ30V/HDR-PJ50V/HDR-TD10/HDR-XR160/HDR-CX550V/HDR-XR550V/HDR-XR500V/HDR-XR520V/HDR-FX1000/HDR-FX7/HDR-HC7/HDR-SR1/HDR-SR11/HDR-SR12/HDR-SR8/HDR-UX1/HDR-UX7/NEX-VG30/NEX-VG30H/NEX-VG900/NEX-VG20/NEX-VG20H/NEX-VG10/DEV-50V/DEV-3/DEV-5/DSC-RX0/DSC-RX10M4/DSC-RX10M3/DSC-RX1RM2/DSC-RX10M2/DSC-HX400V/DSC-HX60V/DSC-RX10/DSC-RX100M2/DSC-RX1R/DSC-HX50V/ILCA-99M2/ILCA-68/ILCA-68K/ILCA-77M2/ILCA-77M2M/ILCA-77M2Q/SLT-A58K/SLT-A99/SLT-A99V/SLT-A37/SLT-A57/SLT-A57K/SLT-A65V/SLT-A65VK/SLT-A65VL/SLT-A77V/SLT-A35/SLT-A35K/DSLR-A560/DSLR-A560L/DSLR-A580/SLT-A33/SLT-A33L/SLT-A55V/ILCE-6400/ILCE-6400L/ILCE-6400M/ILCE-7M3/ILCE-7M3K/ILCE-7RM3/ILCE-9/ILCE-6500/ILCE-6500M/ILCE-6300/ILCE-6300L/ILCE-6300M/ILCE-7SM2/ILCE-7RM2/ILCE-7M2/ILCE-7M2K/ILCE-7S/ILCE-6000/ILCE-6000L/ILCE-6000Y/ILCE-3500J/ILCE-3000K/ILCE-7/ILCE-7K/ILCE-7R/NEX-6/NEX-7/NEX-7K
