$ 1,695.00
A full featured and durable waterproof housing for Panasonic Lumix GH5 and GH5S Mirrorless Micro Four-Thirds cameras. Suitable for scuba, snorkel, surf, pool, and any application in or around the water.
200' (60m) depth rating
Perfect for any wet environment including surf, dive, and pool use
Supremely functional for maximum creative control—access is provided for all important camera functions
The new Dry Lock (DL) Port System gives added security at the surface of the water and accommodates large diameter lenses
Extra-large, soft touch zoom knob; Zoom is accessible for many lenses using our unique universal zoom gear system
Vacuum valve included; Test your system after assembly prior to entering the water; Pump sold separately
Included Ikelite ICS-5 bulkhead connector with manual hotshoe for reliable electrical triggering of underwater strobes; Optional TTL circuitry provides automatic exposure with compatible Ikelite DS strobes
Control symbols are laser etched into the back and will never fade or rub off
Quick install camera mount plate does not need to be removed for battery or memory card access
One spare 1/2-20 threaded accessory port locations on the front of the housing for the addition of optional accessories
Includes a balanced aluminum base with left-hand quick release handle; Right-hand handle sold separately
Signature open-groove design suspends the rear o-ring in a natural position that is easier to maintain and more reliable than forcing the o-ring into a channel
ABS-PC construction is fundamentally corrosion-resistant
Made in the USA; Individually inspected for fit and water pressure tested to depth
1 year limited warranty
Install optional Panasonic TTL Kit # 46031 for automatic TTL exposure with compatible Ikelite DS-model Strobes. Ikelite DS-model strobes may be used with this system without the Panasonic TTL Kit installed, but will not provide TTL exposure.
SEA&SEA, INON, and Nikonos strobes with an electrical connection can be triggered in manual exposure modes using an electrical sync cord. Strobes without an electrical sync cord connection cannot be attached to this system unless slaved off of a hard-wired strobe.
Older non-digital strobes featuring an ICS-5 electrical sync cord bulkhead can be used with this system in manual exposure modes.
Fiber optic only strobes are not compatible with this installation. An external strobe must be connected by electrical sync cord.
Strobes with remote slave capabilities may be triggered off of a flash attached to the housing by electrical sync cord. Ikelite DS strobes support remote triggering using the Optical Slave Converter Product number 4403 or the Water Wizard system (manufactured and sold by Aquatica).
This housing is only compatible with the Panasonic Lumix GH5 and GH5S Mirrorless Cameras as shipped by the manufacturer. Unless otherwise noted, this housing does not accommodate the use of add-on grips, battery grips, eyepieces, LCD covers, or other accessories.
Differences in lens and control placement prevent other DSLR models from being used in this housing. We are not aware of any other models which may be used in or adapted to this particular housing.
The GH5 camera body is not compatible in older housings for Panasonic Lumix GH3/GH4 cameras.
This housing comes standard with the new Dry Lock (DL) port mount. Ports designed for our Four Lock (FL) or Two Lock DSLR housings are not compatible with this system. This housing can be converted by the user to the FL system by removing the DL mount and adding four # 9072.24 port locks.
The DL mount is not designed to be removed and replaced repeatedly. Conversion back to the DL system at a later time requires return of the housing to Ikelite for re-installation and water pressure testing.
DL ports are considerably lighter weight than the comparable FL versions and support a more robust mount. The DL system is recommended for surf photography.
200' (60m) depth rating
Compatible with DL system lens ports
Controls are provided for all important camera functions; Controls are not provided for Diopter Adjustment Control, Rear Control Dial, or Mode Dial Lock. Mode Dial must be un-locked prior to installation for use underwater
1/4-20 thread base mounts with 3.5" spacing
Near neutral buoyancy in fresh water
Actual buoyancy varies depending on choice of lens and port
5.1 lb (2.3 kg)
9.2 x 7.1 x 6.5" (234 x 180 x 165 mm)
Housing
Rear O-ring # 0132.61
Front O-ring # 0132.45
Base with Left-Hand Quick Release Handle # 4077.67
Port Hole Cover # 0200.92
Zoom Gear Retainer # 75900
Waterproof Bulkhead Cap # 9104.5
Silicone Lubricant # 0184.2
Control + Pushbutton Tip Assortment # 9249
1/16" Hex Key # 0945.16
1/8" Hex Key # 0945.18
1 year limited warranty
$ 974.95
This housing requires the addition of a compatible lens port for waterproof operation. Lens port not included.
$ 1,599.95
We've designed this housing to offer one of the best performance to dollar purchases in the world. The Ikelite DSLR housing is a seamless blend of functionality, lighting integration, durability and waterproof integrity.
$ 259.95
Ikelite Product Number 6270.25
Dive into underwater photography with this compact and easy to use system. Durable clear polycarbonate construction provides a unique view of the camera to ensure correct waterproof installation and confidence underwater. The camera installs with drop-in loading for quick and easy set up. Simply close the side latch and see the o-ring form a solid black, watertight seal. Large, ergonomic controls provide access to all important camera functions.
Product Details:
An included flash diffuser improves lighting quality when the camera's built-in flash is used. A built-in flash is effective between 1-3 feet (0.3-0.9m) from the subject in clear conditions. For best results a color correcting filter or external lighting is recommended. External lighting is more powerful than the camera's flash and can be placed in a position to virtually eliminate the backscatter - or "snow" - from your underwater images.
The nature of this camera's lens prevents the effective use of external wide angle lenses.
Ikelite products are designed, built and tested in the USA. We use locally sourced, top-grade materials. Our housings are built by hand and individually tested for fit, function and waterproof integrity. We back our products with over 50 years of experience and service within the dive industry.
Specifications:
What's Included:
$ 974.95
A compact, full-featured waterproof housing for scuba diving, surf, pool, and creative photo opportunities anywhere there's water.
This housing requires the addition of a compatible lens port for waterproof operation. Lens port not included.
$ 474.95
Dive into underwater photography with this compact and simple to use combination!
$ 429.00 - Sold Out
Profoto SKU:901047 | Helix SKU: PF901047
Overview
There’s no simpler way to get perfect exposure. Connect your Profoto AirTTL light to your camera wirelessly by attaching the remote to your camera’s hot shoe. Then, point and shoot in TTL mode, and the Air Remote TTL communicates with the flash. You get perfect exposure. Automatically.
Using Profoto AirTTL, you can even leave your light meter at home and get your shot faster. For more precise control, first shoot in TTL mode to get perfect exposure, then switch to Manual Mode while keeping the same settings, and finally creatively fine-tune and tweak the light just as you want it.
The AirTTL remotes are equipped with Profoto High-Speed Sync (HSS), which allows you to use your flash at shutter speeds up to 1/8,000s. HSS ensures you can control and shape light in broad daylight, and it enables you to get crisp images without motion blur when mixing flash with available light.
For compatible cameras, see the Technical specifications tab.
Supported camera models
$ 9.95
ProMaster SKU: 7130 | Helix SKU: PR7130
ProMaster Body Caps keep dust and dirt out of your camera body when you are storing it with the lens removed.
$ 6.95
ProMaster SKU: 1506 | Helix SKU: PR1506
Overview
Cable Only
UPC: 029144015060
$ 11.99 - Sold Out
ProMaster SKU: 6216 | Helix SKU: PR6216
ProMaster batteries are a high quality, long lasting power source for your digital camera or camcorder. All ProMaster replacement batteries are manufactured to meet or exceed the equipment manufacturer's
Specifications
7.2V 700mAH Lithium Ion
Replaces Panasonic CGA-S002
$ 24.95
ProMaster SKU: 1704 | Helix SKU: PR1704
Protects your camera’s LCD while preserving touch screen functions. It is easily applied through static adhesion – no messy adhesives! Special multi-coatings make this shield highly resistant to water, oil, fingerprints, and nose prints. It is constructed of hardened optical shatter-proof glass for maximum damage protection.
Dimensions: 74 mm W x 50.5 mm H
Fits: Pansonic DCG9, GX85, GX80, G85, G80, G8, GX7 MK II, G7, FZ2000, FZ2500, FZH1, FZ300, LX10, LX15, LX9
$ 17.78
PROMASTER batteries are a high quality, long lasting power source for your digital camera or camcorder. All PROMASTER replacement batteries are manufactured to meet or exceed the equipment manufacturer's specifications. 3.6V 950mAH Replaces Panasonic DMW-BCF10.
$ 49.95
ProMaster SKU: 7678 | Helix SKU: PR7678
ProMaster batteries are a high quality, long lasting power source for your digital camera or camcorder. ProMaster replacement batteries are manufactured to meet or exceed the equipment manufacturer's specifications.
$ 19.99
Promaster DMW-BJC13 (Panasonic) Battery
$ 59.95
$ 49.00
$ 34.95
ProMaster SKU: 6364 | Helix SKU: PR6364
ProMaster batteries are a high quality, long lasting power source for your digital camera or camcorder. ProMaster replacement batteries are manufactured to meet or exceed the equipment manufacturer's specifications.
$ 69.95
$ 9.95
ProMaster SKU: 7116 | Helix SKU: PR7116
ProMaster Rear Lens Caps protect the rear element of you lens from dust, smudges and scratches when your lens is not mounted on your camera.
$ 39.95
ProMaster SKU: 9176 | Helix SKU: PR9176
The ProMaster Traveler + Lithium Ion Battery Charger is a versatile, compact, go anywhere charger for your Li-ION digital camera and camcorder batteries. The Traveler + charger features a built in switching power supply that can be powered from either 110v - 240v AC or 12V DC (optional DC power cord required) for true worldwide compatibility. Combined with the USB power output port and its compact size, it makes a PERFECT solution for those on the go or to use at home. The ProMaster Traveler + charger is available in models to fit most Li-ION digital camera batteries.
• Charges most batteries in 2 hours or less.
• Compact and light weight with no wires and no A/C adapters. Simply plug it in and charge your battery.
• Power with 110v - 240v AC or 12v DC (optional cord required)
Input Power: 100 - 240 V AC, 50/60 Hz | 12 - 24 V DC (for DC In Socket)
Output Power: 4.2 V / 8.4 V DC, Max. 750 mA (with auto detection) | 5.0 V DC Max. 650 mA (for USB Power Port)
This charger will charge the following Canon batteries:
This charger will charge the following Fuji batteries:
This charger will charge the following Minolta batteries:
This charger will charge the following Nikon batteries:
This charger will charge the following Olympus batteries:
This charger will charge the following Panasonic batteries:
This charger will charge the following Pentax batteries:
This charger will charge the following Ricoh batteries:
This charger will charge the following Samsung batteries:
This charger will charge the following Sony batteries:
$ 39.95
ProMaster SKU: 3049 | Helix SKU: PR3049
The ProMaster Traveler + Lithium Ion Battery Charger is a versatile, compact, go anywhere charger for your Li-ION digital camera and camcorder batteries. The Traveler + charger features a built in switching power supply that can be powered from either 110v - 240v AC or 12V DC (optional DC power cord required) for true worldwide compatibility. Combined with the USB power output port and its compact size, it makes a PERFECT solution for those on the go or to use at home. The ProMaster Traveler + charger is available in models to fit most Li-ION digital camera batteries.
• Charges most batteries in 2 hours or less.
• Compact and light weight with no wires and no A/C adapters. Simply plug it in and charge your battery.
• Power with 110v - 240v AC or 12v DC (optional cord required)
This charger will charge the following Panasonic batteries:
$ 69.95
ProMaster SKU: 9183 | Helix SKU: PR9183
Charge two Interchangeable Lens Camera batteries at once with the ProMaster Traveler+ Dual Battery Charger and ensure that you always have a fully charged spare. The Traveler+ Dual Charger is also a great solution for camera grips, which require two batteries. It works with a wide variety of lithium-ion Interchangeable Lens Camera batteries. The built-in USB power port lets you charge phones, tablets, and other USB devices, too.
+ Fast Charging: Charges 2 batteries in 2 hours or less
+ LCD FUEL GAUGE: Shows remaining capacity as well as charging progress for each battery
+ Worldwide Power Compatibility: 100 – 240V internal switching power supply
+ USB Power port: Charges your mobile devices
This charger will charge the following Canon batteries:
This charger will charge the following Fuji batteries:
This charger will charge the following Minolta batteries:
This charger will charge the following Nikon batteries:
This charger will charge the following Olympus batteries:
This charger will charge the following Panasonic batteries:
This charger will charge the following Pentax batteries:
This charger will charge the following Ricoh batteries:
This charger will charge the following Samsung batteries:
This charger will charge the following Sony batteries:
$ 19.95
ProMaster SKU: 7718 | Helix SKU: PR7718
Overview
ProMaster offers a complete line of wired remote shutter release cables to cover almost every popular DSLR and film SLR. The innovative modular design allows the maximum flexibility in working distances. Many cameras offer built-in infrared remote capability but limit the use of your remote to standing in front of the camera. A wired remote cable allows more freedom to work from any position. The ProMaster Wired Remote Shutter Release Cable is fully compatible with all shutter release functions including prefocus and timed exposure.
Features:
- Fully compatible with all shutter release functions including prefocus and timed exposure
- Modular construction allows maximum flexibility in working distance
- Includes camera connector cable and extension for up to 6’ working distance
CA Residents: Prop 65 WARNING(S)