Asis Remote Control for Asis 500
$ 49.95
Asis Remote Control for Asis 500
Asis SKU: AS0100 | Helix SKU: AS0100
Overview
The ASIS Remote Control is a 2.4GHz transmitter that can trigger as well as wirelessly control the power levels and features of the ASIS 500 Monolight. It features two groups and 9 channels in each group to allow individual light control. The trigger takes 3 AAA batteries (not included) and has an effective range up to 164' (50m).
Also included is a 25" (64 cm) sync cable that can be used to trigger the remote with a camera's PC Sync socket if it does not have a compatible hot shoe.
Features
• Lighted LCD Display
• 2.4GHz Radio Trigger
• 2 Groups and 8 Channels
• Working Distance of 164' (50m)
Cactus Wireless HHS Flash Transceiver V6 IIS - Sony
$ 95.00
Cactus Wireless HHS Flash Transceiver V6 IIS - Sony
Cactus SKU: CACV6IIS | Helix SKU: CUCACV6IIS
Overview
Product Description
The Cactus V6 IIs is a wireless flash trigger dedicated for Sony camera and flash that supports HSS and can remote control power output and zoom angle of Sony system flashes. It can also triggers the Cactus V6 II, which makes the V6 IIs the World’s First Sony-supported wireless flash trigger that supports cross-brand high-speed sync (HSS) and control power output and zoom angle of Canon, Fujifilm, Nikon, Olympus, Panasonic and Pentax system flashes all at the same time.*
Equipped with two (2) high-speed sync modes (Normal HSS and Power Sync), AF-assist, auto-detect camera and flash system, Multi-master, and remote control abilities of power and zoom, Cactus V6 IIs packs all that you need for your Sony system in a compact body with simplistic controls.
* With the exception of Sony system flashes due to special timing requirements so it must be paired with a Sony camera in order to support HSS.
Specifications
Cactus Wireless Flash Transceiver V6 IIs
Major features:
- Cross-brand wireless manual power and zoom control with HSS support of Canon, Fujifilm, Nikon, Olympus, Panasonic and Pentax flashes with the Cactus V6 II
- Specifically designed for Sony camera and flashes with the Multi-Interface (MI) shoe
-
Two cross-brand high-speed sync modes:
- Normal HSS supports shutter speeds up to 1/8000s
- Power Sync boosts flash contribution above camera’s x-sync speed
- Multi-master supports up to 20 photo¬graphers firing the same set of flashes at their own power settings
- AF-assist light assists focusing in low light environment1
- Flash profile customization ensures accurate power output
- Work seamlessly with the Cactus RF60 Wireless Flash series to support HSS and Power Sync
- Other useful features inherited from the V6 including:
- Lo Power
- Absolute Power
- TTL Pass-through
- Group Sequence
- Sport Shutter
- Remote Shutter
- Relay Mode
- Delay Mode
- Firmware Update support
Compatible flash models
Sony ADI / P-TTL HS models:
- Metz 44AF-14, 64AF-1;
- Nissin i40, i60*;
- Sony F43M, F58AM4, F60M
* tested with Auto flash profile
Notes on compatibility:
- Cactus V6 IIs is not compatible with Cactus V6 on the current firmware. After updating to new firmware (version pending) on the V6, V6 II will be backward-compatible within camera’s x-sync speed;
- Cactus V6 (RX) does not support Normal HSS when triggered by the V6 IIs;
- Cactus V6 (RX) supports Power Sync by updating to new firmware (version pending) when triggered by the V6 IIs;
- Cactus RF60 (RX) supports Normal HSS and Power Sync by updating to new firmware (version 200 and onwards) when triggered by the V6 IIs;
- Cactus V6 IIs does not work with any other flash trigger model including Cactus V4, V2s or V2;
- Cactus V6 IIs does not transmit TTL information wirelessly;
- Cactus V6 IIs is not compatible with flashes or strobes with reversed polarity connectors;
- Cactus V6 IIs is compatible with practically all Sony cameras that come with either (1) a Sony Multi-interface Shoe, (2) a Minolta / Sony iISO hot shoe via an adapter, or (3) a female sync port connection (supports only basic flash triggering;
- Cactus V6 IIs is compatible with the Wireless Flash Transceiver V5 and Laser Trigger LV5 for basic flash triggering and shutter release.
1 AF-assist works when the camera sends out a corresponding signal.
2 Requires a hot shoe adapter such as Sony ADP-MAA.
Item Includes
Phottix Ares II Wireless Flash Trigger Receiver Only
$ 40.95
Phottix Ares II Wireless Flash Trigger Receiver Only
Phottix SKU: PH89551 | Helix SKU: PH89551
Overview
Phottix Odin II TTL Flash Trigger Receiver for Canon
$ 130.95
Phottix Odin II TTL Flash Trigger Receiver for Canon
Phottix SKU: PH89072 | Helix SKU: PH89072
Overview
The Odin II adds new cutting-edge functionality and features to Phottix's flagship flash trigger.
The Odin II UI and control system has been overhauled making it faster and easier to use. It features 5 groups with individual buttons and a control dial for quickly adjusting flash power levels. An AF assist light has been added to the Odin II TCU for improved focusing when used in low light environments.
With 32 channels and a new Digital ID function, the Odin II offers photographers a way to personalized their Odins and prevent triggering from other nearby triggers. By entering a unit 4 digit ID number, a photographers Odin II receivers will only trigger by transmitters using the same ID number.
The same features that made the original Phottix Odin an award-winning product are found in the new Odin II. TTL and Manual power control, flash zoom control, LCD display for visual feedback, high speed sync, and second curtain sync.
The Phottix Odin II is fully compatible with the Phottix ecosystem of flash triggers – the original Odin, Strato II and Atlas II. The Odin II will also control and trigger the Indra TTL Studio Light and Mitros+ TTL Transceiver Flash.
Designed based on input from photographers around the world, the Phottix Odin II features a USB port for firmware upgrades.
Items Include:
Odin II Receiver
2x AA Batteries
3.5mm to PC Sync Cable
3.5mm to 3.5mm cable
6.3mm adapter
Lanyard
Instructions CD
QC certificate
Specifications
| Weight | 0.2 lbs. (0.09 kg) |
| Dimensions | 1.89W X 2.72H X 3.19D in. (4.8 X 8.1 cm) |
| Warranty | Limited 1 Year |
| Frequency | 2.4Ghz |
| Channels | 32 |
| Zones | 5 |
| Antenna | Internal |
| Display | LCD |
| Range | 100m |
| Max Sync Speed | 1/8000 on compatible camera |
| Power Supply | AA batteries |
| Shape | 82x70x48cm |
Features:
- Wireless 2.4GHz. TTL and Manual Flash Triggering, Range 100m 32 channels with Digital ID Remote power control of groups in TTL with +/- EV adjustments (3 stops in 1/3 stop increments - 18 different levels.) hMix TTL and Manual flash – fire some groups in TTL, others as manual.
- Remote power control in A:B ratio modes with +/- EV adjustments.
- High speed sync – shutter speeds up to 1/8000 sec.
- Second curtain sync functions, Remote manual mode flash power control.
- Remote flash head zoom adjustments – auto or manual
- Compatible with Phottix Odin ,Strato II, Atlas II Wireless Triggers.
- Upgradeable via built-in USB ports.
Phottix Odin II TTL Flash Trigger Receiver for Nikon
$ 130.95
Phottix Odin II TTL Flash Trigger Receiver for Nikon
Phottix SKU: PH89067 | Helix SKU: PH89067
Overview
The Odin II adds new cutting-edge functionality and features to Phottix's flagship flash trigger.
The Odin II UI and control system has been overhauled making it faster and easier to use. It features 5 groups with individual buttons and a control dial for quickly adjusting flash power levels. An AF assist light has been added to the Odin II TCU for improved focusing when used in low light environments.
With 32 channels and a new Digital ID function, the Odin II offers photographers a way to personalized their Odins and prevent triggering from other nearby triggers. By entering a unit 4 digit ID number, a photographers Odin II receivers will only trigger by transmitters using the same ID number.
The same features that made the original Phottix Odin an award-winning product are found in the new Odin II. TTL and Manual power control, flash zoom control, LCD display for visual feedback, high speed sync, and second curtain sync.
The Phottix Odin II is fully compatible with the Phottix ecosystem of flash triggers – the original Odin, Strato II and Atlas II. The Odin II will also control and trigger the Indra TTL Studio Light and Mitros+ TTL Transceiver Flash.
Designed based on input from photographers around the world, the Phottix Odin II features a USB port for firmware upgrades.
Items Include:
Odin II Receiver
2x AA Batteries
3.5mm to PC Sync Cable
3.5mm to 3.5mm cable
6.3mm adapter
Lanyard
Instructions CD
QC certificate
Specifications
| Weight | 0.2 lbs. (0.09 kg) |
| Dimensions | 1.89W X 2.72H X 3.19D in. (4.8 X 8.1 cm) |
| Warranty | Limited 1 Year |
| Frequency | 2.4Ghz |
| Channels | 32 |
| Zones | 5 |
| Antenna | Internal |
| Display | LCD |
| Range | 100m |
| Max Sync Speed | 1/8000 on compatible camera |
| Power Supply | AA batteries |
| Shape | 82x70x48cm |
Features:
- Wireless 2.4GHz. TTL and Manual Flash Triggering, Range 100m 32 channels with Digital ID Remote power control of groups in TTL with +/- EV adjustments (3 stops in 1/3 stop increments - 18 different levels.) hMix TTL and Manual flash – fire some groups in TTL, others as manual.
- Remote power control in A:B ratio modes with +/- EV adjustments.
- High speed sync – shutter speeds up to 1/8000 sec.
- Second curtain sync functions, Remote manual mode flash power control.
- Remote flash head zoom adjustments – auto or manual
- Compatible with Phottix Odin ,Strato II, Atlas II Wireless Triggers.
- Upgradeable via built-in USB ports.
Phottix Odin II TTL Flash Trigger Transmitter for Canon
$ 170.95
Phottix Odin II TTL Flash Trigger Transmitter for Canon
Phottix SKU: PH89074 | Helix SKU: PH89074
Overview
The Odin II adds new cutting-edge functionality and features to Phottix's flagship flash trigger.
The Odin II UI and control system has been overhauled making it faster and easier to use. It features 5 groups with individual buttons and a control dial for quickly adjusting flash power levels. An AF assist light has been added to the Odin II TCU for improved focusing when used in low light environments.
With 32 channels and a new Digital ID function, the Odin II offers photographers a way to personalized their Odins and prevent triggering from other nearby triggers. By entering a unit 4 digit ID number, a photographers Odin II receivers will only trigger by transmitters using the same ID number.
The same features that made the original Phottix Odin an award-winning product are found in the new Odin II. TTL and Manual power control, flash zoom control, LCD display for visual feedback, high speed sync, and second curtain sync.
The Phottix Odin II is fully compatible with the Phottix ecosystem of flash triggers – the original Odin, Strato II and Atlas II. The Odin II will also control and trigger the Indra TTL Studio Light and Mitros+ TTL Transceiver Flash.
Designed based on input from photographers around the world, the Phottix Odin II features a USB port for firmware upgrades.
Features:
- 5 groups A,B,C,D,E
- Wireless 2.4GHz. TTL and Manual Flash Triggering, Range 100m
- Group buttons and control dial for fast power changes
- 32 channels with Digital ID
- Remote power control of groups in TTL with +/- EV adjustments (3 stops in 1/3 stop increments - 18 different levels.)
- Mix TTL and Manual flash – fire some groups in TTL, others as manual.
- Remote power control in A:B ratio modes with +/- EV adjustments.
- High speed sync – shutter speeds up to 1/8000 sec.
- Second curtain sync functions, Remote manual mode flash power control.
- Remote flash head zoom adjustments – auto or manual
- Compatible with Phottix Odin ,Strato II, Atlas II Wireless Triggers.
- Upgradeable via built-in USB ports.
Items Include:
Odin II TCU Transmitter
2x AA Batteries
3.5mm to PC Sync Cable
3.5mm to 3.5mm cable
6.3mm adapter
USB Cable
Lanyard
Instructions CD
QC certificate
Specifications
| Weight | 0.29 lbs. (0.13 kg) |
| Dimensions | 2.2W X 2.8H X 4.33D in. (5.6 X 11 cm) |
| Warranty | Limited 1 Year |
| Frequency | 2.4Ghz |
| Channels | 32 |
| Zones | 5 |
| Antenna | Internal |
| Display | LCD |
| Range | 100m |
| Max Sync Speed | 1/8000 on compatible camera |
| Power Supply | AA batteries |
| Shape |
11x72x56cm |
Phottix Odin II TTL Flash Trigger Transmitter for Nikon
$ 170.95
Phottix Odin II TTL Flash Trigger Transmitter for Nikon
Phottix SKU: PH89069 | Helix SKU: PH89069
Overview
The Odin II adds new cutting-edge functionality and features to Phottix's flagship flash trigger.
The Odin II UI and control system has been overhauled making it faster and easier to use. It features 5 groups with individual buttons and a control dial for quickly adjusting flash power levels. An AF assist light has been added to the Odin II TCU for improved focusing when used in low light environments.
With 32 channels and a new Digital ID function, the Odin II offers photographers a way to personalized their Odins and prevent triggering from other nearby triggers. By entering a unit 4 digit ID number, a photographers Odin II receivers will only trigger by transmitters using the same ID number.
The same features that made the original Phottix Odin an award-winning product are found in the new Odin II. TTL and Manual power control, flash zoom control, LCD display for visual feedback, high speed sync, and second curtain sync.
The Phottix Odin II is fully compatible with the Phottix ecosystem of flash triggers – the original Odin, Strato II and Atlas II. The Odin II will also control and trigger the Indra TTL Studio Light and Mitros+ TTL Transceiver Flash.
Designed based on input from photographers around the world, the Phottix Odin II features a USB port for firmware upgrades.
Items Include:
Odin II TCU Transmitter
2x AA Batteries
3.5mm to PC Sync Cable
3.5mm to 3.5mm cable
6.3mm adapter
USB Cable
Lanyard
Instructions CD
QC certificate
Specifications
| Weight | 0.29 lbs. (0.13 kg) |
| Dimensions | 2.2W X 2.8H X 4.33D in. (5.6 X 11 cm) |
| Warranty | Limited 1 Year |
| Frequency | 2.4Ghz |
| Channels | 32 |
| Zones | 5 |
| Antenna | Internal |
| Display | LCD |
| Range | 100m |
| Max Sync Speed | 1/8000 on compatible camera |
| Power Supply | AA batteries |
| Shape |
11x72x56cm |
Features:
- 5 groups A,B,C,D,E
- Wireless 2.4GHz. TTL and Manual Flash Triggering, Range 100m
- Group buttons and control dial for fast power changes
- 32 channels with Digital ID
- Remote power control of groups in TTL with +/- EV adjustments (3 stops in 1/3 stop increments - 18 different levels.)
- Mix TTL and Manual flash – fire some groups in TTL, others as manual.
- Remote power control in A:B ratio modes with +/- EV adjustments.
- High speed sync – shutter speeds up to 1/8000 sec.
- Second curtain sync functions, Remote manual mode flash power control.
- Remote flash head zoom adjustments – auto or manual
- Compatible with Phottix Odin ,Strato II, Atlas II Wireless Triggers.
- Upgradeable via built-in USB ports.
Phottix Odin II TTL Flash Trigger Transmitter for Sony
$ 170.95
Phottix Odin II TTL Flash Trigger Transmitter for Sony
Phottix SKU: PH89079 | Helix SKU: PH89079
Overview
The Odin II adds new cutting-edge functionality and features to Phottix's flagship flash trigger.
The Odin II UI and control system has been overhauled making it faster and easier to use. It features 5 groups with individual buttons and a control dial for quickly adjusting flash power levels. An AF assist light has been added to the Odin II TCU for improved focusing when used in low light environments.
With 32 channels and a new Digital ID function, the Odin II offers photographers a way to personalized their Odins and prevent triggering from other nearby triggers. By entering a unit 4 digit ID number, a photographers Odin II receivers will only trigger by transmitters using the same ID number.
The same features that made the original Phottix Odin an award-winning product are found in the new Odin II. TTL and Manual power control, flash zoom control, LCD display for visual feedback, high speed sync, and second curtain sync.
The Phottix Odin II is fully compatible with the Phottix ecosystem of flash triggers – the original Odin, Strato II and Atlas II. The Odin II will also control and trigger the Indra TTL Studio Light and Mitros+ TTL Transceiver Flash.
Designed based on input from photographers around the world, the Phottix Odin II features a USB port for firmware upgrades.
Features:
- 5 groups A,B,C,D,E
- Wireless 2.4GHz. TTL and Manual Flash Triggering, Range 100m
- Group buttons and control dial for fast power changes
- 32 channels with Digital ID
- Remote power control of groups in TTL with +/- EV adjustments (3 stops in 1/3 stop increments - 18 different levels.)
- Mix TTL and Manual flash – fire some groups in TTL, others as manual.
- Remote power control in A:B ratio modes with +/- EV adjustments.
- High speed sync – shutter speeds up to 1/8000 sec.
- Second curtain sync functions, Remote manual mode flash power control.
- Remote flash head zoom adjustments – auto or manual
- Compatible with Phottix Odin ,Strato II, Atlas II Wireless Triggers.
- Upgradeable via built-in USB ports.
Items Include:
Odin II TCU Transmitter
2x AA Batteries
3.5mm to PC Sync Cable
3.5mm to 3.5mm cable
6.3mm adapter
USB Cable
Lanyard
Instructions CD
QC certificate
Specifications
| Weight | 0.29 lbs. (0.13 kg) |
| Dimensions | 2.2W X 2.8H X 4.33D in. (5.6 X 11 cm) |
| Warranty | Limited 1 Year |
| Frequency | 2.4Ghz |
| Channels | 32 |
| Zones | 5 |
| Antenna | Internal |
| Display | LCD |
| Range | 100m |
| Max Sync Speed | 1/8000 on compatible camera |
| Power Supply | AA batteries |
| Shape |
11x72x56cm |
Phottix Strato II Multi 5-in-1 Receiver for Canon
$ 64.95
Phottix Strato II Multi 5-in-1 Receiver for Canon
Phottix SKU: PH15656 | Helix SKU: PH15656
Overview
Extra receivers for the Phottix Strato II system. The Phottix Strato II Multi 5-in-1 Wireless Trigger System gives photographers incredible control over their flashes and Monolights. Four channels and four groups provide unparalleled control in the studio or on location.
The Strato II Multi can be used as a wired or wireless shutter release. The 2.4 GHz. transmitter and receivers offer ranges of more than 150 meters and sync at speeds of 1/250 second.
Features
- 4 groups: A,B,C,D
- 4 Channels
- 150+ m range
- 1/250 sec. sync speed
- Flash wake-up functions
- Hot shoe / PC Flash triggering
- Studio strobe triggering
- Wired and wireless shutter release functions
- Pass-through hot shoe on transmitter allows on camera flash to use TTL functions
- 2.4 GHz. frequency
- Uses AAA batteries
- Compatible with Phottix Strato™ 4-in-1, Phottix Atlas II, Phottix Odin Wireless Triggers and Phottix Mitros+
- TTL Transceiver Flashes.
- On compatible flashes and cameras
Items Include:
1 - Strato II multi receiver
1 - 2x AAA batteries
1 - PC to 3.5mm cable
1 - 3.5mm to 3.5mm cable
1 - 6.3mm adapter
1 - Lanyard
1 - Instruction manual
1 - QC certificate
Specifications
| Weight | 0.49 lbs. (0.22 kg) |
| Dimensions | 1.57W X 1.42H X 3.35D in. (4 X 3.6 X 8.5 cm) |
| Warranty | Limited 1 Year |
| Frequency | 2.4GHz |
| Channels | 4 |
| Zones | 3 groups |
| Antenna | internal antenna PCB layout |
| Display | No |
| Range | Approx. 492 ft. (150m) |
| Max Sync Speed | 0 |
| Power Supply | 2 AAA batteries |
| Operating Temperature | ~5 ~ 149 F (15 ~ 65 C) |
| Storage Temperature | -22 ~ 185 F (-30 ~ 85 C) |
| Input/ Output | 3.5 mm port for PC Sync Cable, Hot Shoe ,DC Ports (receiver) |
Phottix Strato II Multi 5-in-1 Receiver for Nikon
$ 64.95
Phottix Strato II Multi 5-in-1 Receiver for Nikon
Phottix SKU: PH15657 | Helix SKU: PH15657
Overview
Extra receivers for the Phottix Strato II system. The Phottix Strato II Multi 5-in-1 Wireless Trigger System gives photographers incredible control over their flashes and Monolights. Four channels and four groups provide unparalleled control in the studio or on location.
The Strato II Multi can be used as a wired or wireless shutter release. The 2.4 GHz. transmitter and receivers offer ranges of more than 150 meters and sync at speeds of 1/250 second.
Features
- 4 groups: A,B,C,D
- 4 Channels
- 150+ m range
- 1/250 sec. sync speed
- Flash wake-up functions
- Hot shoe / PC Flash triggering
- Studio strobe triggering
- Wired and wireless shutter release functions
- Pass-through hot shoe on transmitter allows on camera flash to use TTL functions
- 2.4 GHz. frequency
- Uses AAA batteries
- Compatible with Phottix Strato™ 4-in-1, Phottix Atlas II, Phottix Odin Wireless Triggers and Phottix Mitros+
- TTL Transceiver Flashes.
- On compatible flashes and cameras
Items Include:
1 - Strato II multi receiver
1 - 2x AAA batteries
1 - PC to 3.5mm cable
1 - 3.5mm to 3.5mm cable
1 - 6.3mm adapter
1 - Lanyard
1 - Instruction manual
1 - QC certificate
Specifications
| Weight | 0.49 lbs. (0.22 kg) |
| Dimensions | 1.57W X 1.42H X 3.35D in. (4 X 3.6 X 8.5 cm) |
| Warranty | Limited 1 Year |
| Frequency | 2.4GHz |
| Channels | 4 |
| Zones | 3 groups |
| Antenna | internal antenna PCB layout |
| Display | No |
| Range | Approx. 492 ft. (150m) |
| Max Sync Speed | 0 |
| Power Supply | 2 AAA batteries |
| Operating Temperature | ~5 ~ 149 F (15 ~ 65 C) |
| Storage Temperature | -22 ~ 185 F (-30 ~ 85 C) |
| Input/ Output | 3.5 mm port for PC Sync Cable, Hot Shoe ,DC Ports (receiver) |
Phottix Strato II Multi 5-in-1 Trigger Set for Canon
$ 109.95
Phottix Strato II Multi 5-in-1 Trigger Set for Canon
Phottix SKU: PH15651 | Helix SKU: PH15651
Overview
The Strato II Multi is a flash trigger and it can be used as a wired or wireless shutter release. The 2. 4 GHz. transmitter and receivers offer ranges of more than 150 meters and sync at speeds of 1/250 second .
Transmitters feature an innovative TTL pass-through hot shoe - allowing full TTL mode to be used with a camera mounted flash. Receivers offer flash wake-up functions. It's fast, sexy, and powerful - perfect for your studio or location work.
Items Include:
1 - Strato II multi transmitter
1 - Strato II multi receiver
1 - 4x AAA batteries
1 - PC to 3.5mm cable
1 - 3.5mm to 3.5mm cable
1 - 6.3mm adapter
1 - 2x Lanyard
1 - C6 and C8 shutter cables (Canon set)
1 - N6, N8 and N10 shutter cable (Nikon set)
1 - S6 shutter cable (Sony set)
1 - Instruction manual
1 - QC certificate
Specifications
| Weight | 0.82 lbs. (0.37 kg) |
| Dimensions | 3.15W X 2.91H X 6.77D in. (8 X 7.4 X 17.2 cm) |
| Warranty | Limited 1 Year |
| Frequency | 2.4GHz |
| Channels | 4 |
| Zones | 3 groups |
| Antenna | internal antenna PCB layout |
| Display | No |
| Range | Approx. 492 ft. (150m) |
| Max Sync Speed | 0 |
| Power Supply | 2 AAA batteries |
| Operating Temperature | ~5 ~ 149 F (15 ~ 65 C) |
| Storage Temperature | -22 ~ 185 F (-30 ~ 85 C) |
| Input/ Output | 3.5 mm port for PC Sync Cable, Hot-Shoe (transmitter),2.5 mm port for accessory cable, 3.5 mm port for PC Sync Cable, Hot Shoe ,DC Ports (receiver) |
Phottix Strato II Multi 5-in-1 Trigger Set for Nikon
$ 109.95
Phottix Strato II Multi 5-in-1 Trigger Set for Nikon
Phottix SKU: PH15653 | Helix SKU: PH15653
Overview
The Strato II Multi is a flash trigger and it can be used as a wired or wireless shutter release. The 2.4 GHz. transmitter and receivers offer ranges of more than 150 meters and sync at speeds of 1/250 second .
Transmitters feature an innovative TTL pass-through hot shoe - allowing full TTL mode to be used with a camera mounted flash. Receivers offer flash wake-up functions. It's fast, sexy, and powerful - perfect for your studio or location work.
Items Include:1 - Strato II multi transmitter
1 - Strato II multi receiver
1 - 4x AAA batteries
1 - PC to 3.5mm cable
1 - 3.5mm to 3.5mm cable
1 - 6.3mm adapter
1 - 2x Lanyard
1 - C6 and C8 shutter cables (Canon set)
1 - N6, N8 and N10 shutter cable (Nikon set)
1 - S6 shutter cable (Sony set)
1 - Instruction manual
1 - QC certificate
ProMaster Flash Trigger System 2.4GHz
$ 99.95
ProMaster Flash Trigger System 2.4GHz
ProMaster SKU: 5741 | Helix SKU: PR5741
OVERVIEW
The ultimate remote tool, the ProMaster Remote Camera and Flash Trigger System works as a wireless remote trigger for your on camera or studio flash or it can be used as a wireless remote shutter release for your camera (optional modular cord required).
These units operate on the 2.4GHz frequency, providing for extended distance and much higher reliability than older systems. With the dual functionality, the ProMaster Remote Camera and Flash Trigger System is a must have accessory for both the avid photographer or the casual shooter. Available in either single flash or 2 flash configurations.
Functions:
Wired Remote Control(for DSLR camera with remote socket)
Wireless Remote Control(for DSLR camera with remote socket)
BULB/Continuous Shooting
Delayed Shutter Release
Wireless Flash Trigger (for camera speed light or studio light)
Receiver includes 1/4"-20 tripod mount
SPECIFICATIONS
| Wireless Frequency: | 2.4GHz |
| Channels | 16 |
| Operating Distance: | 300’ / 100 meters (Max) |
| Flash Sync Speed: | 1/250th (Max) |
| Transmitter Power: | CR2032 (1qty) |
| Receiver Power: | AAA Battery (2qty) |
| Transmitter Weight: | 1.1 oz / 32g (w/o Battery) |
| Transmitter Dimensions: | 2 7/16 x 1 9/16 x 1 1/16'' / 62.6x39.2x27.1mm |
| Receiver Weight: | 1.4 oz. / 40g (w/o Battery) |
| Receiver Dimensions: | 3 1/8 x 1 1/2 x 1 5/16" / 79.9x37.8x33.2mm |
ProMaster Flash Trigger System 2.4GHz
$ 69.95
ProMaster Flash Trigger System 2.4GHz
ProMaster SKU: 5734 | Helix SKU: PR5734
Overview
The ultimate remote tool, the ProMaster Remote Camera and Flash Trigger System works as a wireless remote trigger for your on camera or studio flash or it can be used as a wireless remote shutter release for your camera (optional modular cord required).
These units operate on the 2.4GHz frequency, providing for extended distance and much higher reliability than older systems. With the dual functionality, the ProMaster Remote Camera and Flash Trigger System is a must have accessory for both the avid photographer or the casual shooter. Available in either single flash or 2 flash configurations.
Functions:
Wired Remote Control(for DSLR camera with remote socket)
Wireless Remote Control(for DSLR camera with remote socket)
BULB/Continuous Shooting
Delayed Shutter Release
Wireless Flash Trigger (for camera speed light or studio light)
Receiver includes 1/4"-20 tripod mount
Specifications
| Wireless Frequency: | 2.4GHz |
| Channels | 16 |
| Operating Distance: | 300’ / 100 meters (Max) |
| Flash Sync Speed: | 1/250th (Max) |
| Transmitter Power: | CR2032 (1qty) |
| Receiver Power: | AAA Battery (2qty) |
| Transmitter Weight: | 1.1 oz / 32g (w/o Battery) |
| Transmitter Dimensions: | 2 7/16 x 1 9/16 x 1 1/16'' / 62.6x39.2x27.1mm |
| Receiver Weight: | 1.4 oz. / 40g (w/o Battery) |
| Receiver Dimensions: | 3 1/8 x 1 1/2 x 1 5/16" / 79.9x37.8x33.2mm |
ProMaster Multi-Function Flash Trigger, 8 Channel, 2.4ghz
$ 49.95 - Sold Out
ProMaster Multi-Function Flash Trigger, 8 Channel, 2.4ghz
ProMaster SKU: 9518 | Helix SKU: PR9518
Overview
The ProMaster Multi-Function Flash Trigger System is an all-in-one solution for triggering all types of studio flash as well as your shoe mount flash. The 8 channel, 2.4 GHz trigger is engineered to reduce interference providing the maximum reliability both indoors and out. Works with studio flash heads, monolights or shoe mount flash units Flash sync speeds up to 1/250th second (determined by flash/camera combination) Operates on 2.4 GHz frequency to minimize RF interference 8 operating channels helps achieve the most reliable operation and allows for the use of multiple triggers in the same shooting set up Trigger uses hot shoe or PC cord for maximum compatibility The ProMaster Multi-Function Flash Trigger is an all-in-one solution for triggering all types of studio flash as well as your shoe mount flash.
ProMaster ST1C TTL Speedlight Transceiver - Canon
$ 99.95
ProMaster ST1C TTL Speedlight Transceiver - Canon
ProMaster SKU: 4667 | Helix SKU: PR4667
Overview
+ Multiple Channels
+ HSS high-speed sync: TTL 1/8000
+ 325’ range
+ Functions as a transmitter or receiver
+ AF assist beam
+ Also works as a wireless shutter release (with additional cable)
+ USB fireware upgradable
+ Stand included
- 2.4GHz operating frequency
- Manual output setting: 1/1 - 1/128
- Master/Slave Mode
- Net Weight: 3.5oz / 98g (without batteries)
- Dimensions: 3 1/6” x 2 9/16” x 2 7/16” (77.8mm x 65mm x 62mm)
- Power Source: 2 x 1.5V AA alkaline batteries, 2 x 1.2V NiMh batteries
The following cables are available to expand the capabilities of the ST1
- ProMaster 6368 camera triggering cable for Nikon MC30 port
- ProMaster 6375 camera triggering cable for Nikon MCDC2 port
- ProMaster 6382 camera triggering cable for Canon RS80 port
- ProMaster 6389 camera triggering cable for Canon RS60 port
- ProMaster 3717 USB firmware downloading cable for computer connection
ProMaster ST1N TTL Speedlight Transceiver - Nikon
$ 99.95
ProMaster ST1N TTL Speedlight Transceiver - Nikon
ProMaster SKU: 4660 | Helix SKU: PR4660
Overview
+ Multiple Channels
+ HSS high-speed sync: TTL 1/8000
+ 325’ range
+ Functions as a transmitter or receiver
+ AF assist beam
+ Also works as a wireless shutter release (with additional cable)
+ USB fireware upgradable
+ Stand included
- 2.4GHz operating frequency
- Manual output setting: 1/1 - 1/128
- Master/Slave Mode
- Net Weight: 3.5oz / 98g (without batteries)
- Dimensions: 3 1/6” x 2 9/16” x 2 7/16” (77.8mm x 65mm x 62mm)
- Power Source: 2 x 1.5V AA alkaline batteries, 2 x 1.2V NiMh batteries
The following cables are available to expand the capabilities of the ST1
- ProMaster 6368 camera triggering cable for Nikon MC30 port
- ProMaster 6375 camera triggering cable for Nikon MCDC2 port
- ProMaster 6382 camera triggering cable for Canon RS80 port
- ProMaster 6389 camera triggering cable for Canon RS60 port
- ProMaster 3717 USB firmware downloading cable for computer connection
ProMaster Unplugged 3-Flash M-Firing Kit 3-Flash Receiver Kit
$ 79.95
ProMaster Unplugged 3-Flash M-Firing Kit 3-Flash Receiver Kit
ProMaster SKU: 6733 | Helix SKU: PR6733
Overview
- Fires up to 3 speedlights at once
- 16 Channels
- 1/250s max. sync. speed
- 300' / 100m range
- Includes 3-mReceiver with 2 AAA batteries
- Includes mTransmitter with 23A battery
- Receiver has mounting hole for umbrella and mounts to most light stands
Specifications
mTransmitter Specs:
- 2.4GHz operating frequency
- 2.5mm sync. socket
- Weight: 1.6 oz / 46 g
- Dimensions: 2 11/16" x 2 1/16" x 1 5/8" / 68mm x 52mm x 41mm
- Power source: 1 x 23A battery
3-mReceiver Specs:
- 2.4GHz operating frequency
- Weight: 10.9 oz / 310 g
- Dimensions: 7 1/4" x 3" x 1 3/4" / 185mm x 75mm x 45mm
- Power source: 2 x AAA batteries
Note: Weight and dimensions do not include batteries or cords.
ProMaster Unplugged M-Firing Kit Transmitter & Receiver Kit
$ 79.95
ProMaster Unplugged M-Firing Kit Transmitter & Receiver Kit
ProMaster SKU: 6726 | Helix SKU: PR6726
Overview
The ProMaster Unplugged M-Firing Kit includes a transmitter and receiver in one package. The mTransmitter allows for the use of an on camera flash while also triggering an off camera speedlight or strobe. The m-Firing kit can be used in conjunction with ProMaster m-Series Strobes and the ProMaster 3-Flash M-Firing Kit. Additional receivers are available separately for triggering more than one off camera strobe.
- 16 Channels
- 1/250s max. sync. speed
- 300' / 100m range
- Includes mReceiver with 2 AAA batteries, 3.5mm sync cord, and 6.35mm sync adapter.
- Includes mTransmitter with 23A battery
- Can fire speedlights/flashes and strobe lights.
- Compatible with Unplugged m-Series m300, m400 & m600 monolights.
Specifications
mTransmitter Specs:
- 2.4GHz operating frequency
- 2.5mm sync. socket
- Weight: 1.6 oz / 46 g
- Dimensions: 2 11/16" x 2 1/16" x 1 5/8" / 68mm x 52mm x 41mm
- Power source: 1 x 23A battery
mReceiver Specs.
- 2.4GHz operating frequency
- 2.5mm sync. socket
- Weight: 1.4 oz / 41 g
- Dimensions: 3" x 1 11/16" x 1" / 76mm x 43mm x 26mm
- Power source: 2 x AAA batteries
Note: Weight and dimensions do not include batteries or cords.
ProMaster Unplugged M-Receiver 2.4GHz Radio Receiver
$ 39.95
ProMaster Unplugged M-Receiver 2.4GHz Radio Receiver
ProMaster SKU: 6719 | Helix SKU: PR6719
Overview
- 16 Channels
- 1/250s max. sync. speed
- 300' / 100m range
- Includes 2 AAA batteries
- Includes 1/8" / 3.5mm sync. cord
- Includes 1/4" / 6.35mm sync adapter
- Can fire speedlights/flashes and strobe lights
- Works with the Unplugged mTransmitter
Specifications
- 2.4GHz operating frequency
- 2.5mm sync. socket
- Weight: 1.4 oz / 41 g
- Dimensions: 3" x 1 11/16" x 1" / 76mm x 43mm x 26mm
- Power source: 2 x AAA batteries
Note: Weight and dimensions do not include batteries or cords.
ProMaster Unplugged M-Transmitter 2.4GHz Radio Transmitter
$ 39.95
ProMaster Unplugged M-Transmitter 2.4GHz Radio Transmitter
ProMaster SKU: 6712 | Helix SKU: PR6712
Overview
- 16 Channels
- 1/250s max. sync. speed
- 300' / 100m range
- Includes 23A battery
- Works with Unplugged mReceivers, 3-mReceiver, and m300 / m400 / m600 monolights
Specifications
- 2.4GHz operating frequency
- 2.5mm sync. socket
- Weight: 1.6 oz / 46 g
- Dimensions: 2 11/16" x 2 1/16" x 1 5/8" / 68mm x 52mm x 41mm
- Power source: 1 x 23A battery
note: Weight & dimensions do not include batteries or cords
ProMaster Unplugged TTL Transmitter - Canon
$ 79.95
ProMaster Unplugged TTL Transmitter - Canon
ProMaster SKU: 6866 | Helix SKU: PR6866
Overview
- ETTL mode with exposure compensation
- Multi flash mode
- High speed sync.
- Manual mode
- 15 Channels with 99 IDs
- A, B, and C Groups with ratio control
- Modeling light control (on/off & intensity)
- AF assist beam (on and off)
- Control of lights's audible function (on and off)
- 300' / 100 m range
- USB firmware upgradeable
Availability of some features is camera-model dependent
Specifications
- Compatible with UNPLUGGED TTL lights
- 2.4 GHz operating frequency
- 1/8,000 second maximum sync. speed
- Weight: 3 1/4 oz / 92 g
- Dimensions: 4 1/4" x 2 3/4" x 1 1/2" / 108mm x 70mm x 38mm
- Power source: 2 x AA batteries
Weights & dimensions do not include batteries or cords.
Item Includes
- 1 UNPLUGGED TTL Transmitter for Canon
- 2 x AA batteries
ProMaster 5398 USB firmware downloading cable for computer connection. USB micro-B.
ProMaster Unplugged TTL Transmitter - Nikon
$ 79.95
ProMaster Unplugged TTL Transmitter - Nikon
ProMaster SKU: 6859 | Helix SKU: PR6859
Overview
- iTTL mode with exposure compensation
- RPT repeat flsh mode
- High speed sync.
- Rear curtain sync.
- Manual mode
- 15 Channels with 99IDs
- A, B, and C Groups with ratio control
- Modeling light control (on/off & intensity)
- AF assist beam (on and off)
- Control of light's audible function (on and off)
- 300' /100m range
- USB firmware upgradeable
Availability of some features is camera-model dependent
Specifications
- Compatible with UNPLUGGED TTL lights
- 2.4 GHz operating frequency
- 1/8,000 second maximum sync. speed
- Weight: 3 1/4 oz / 92 g
- Dimensions: 4 1/4" x 2 3/4" x 1 1/2" / 108mm x 70mm x 38mm
- Power source: 2 x AA batteries
Weights & dimensions do not include batteries or cords.
Item Includes
- 1 UNPLUGGED TTL Transmitter for Nikon
- 2 x AA batteries
ProMaster 5398 USB firmware downloading cable for computer connection. USB micro-B.
Smith-Victor RTK4 4 Channel Radio Trigger Kit
$ 93.95
Smith-Victor RTK4 4 Channel Radio Trigger Kit
Smith-Victor SKU: 401552 | Helix SKU: SV401552
Overview
• 1 Hot Shoe Radio Transmitter
• 1 Radio Receiver with 1/4 In. Phono Plug and Hook and Loop Strap
• 1 Mini-phono Plug Sync Adapter for Receiver
• 1 PC to Mini-phono Plug Adapter for Cameras with a PC Connector but no Hot Shoe
• 1 Transmitter Battery
• 1 Set Hook and Loop Straps
Used Pocket Wizard Flex TT5 - Canon
$ 79.97
Used Pocket Wizard Flex TT5 - Canon
Pocket Wizard SKU: PW-FLEX-C | Helix SKU: PWFLEXCU
Overview
PocketWizard’s newest firmware platform taps into the camera’s digital communications to enable an entirely new level of remote flash capability through our proven radio system. ControlTL allows remote TTL for Canon E-TTL II systems as well as Manual Power Control. ControlTL firmware is configurable and upgradeable for “future-proof” continuous improvement.
Dedicated E-TTL II Triggering
Locking your MiniTTI Transmitter into the hot shoe of a Canon DSLR camera and mounting E-TTL II flashes onto FlexTT5 Transceivers gives you full autoflash exposure control with the freedom and reliability of a PocketWizard radio. There are no special settings to make or modes to call up. Use the camera, on-camera flash or flash commander controls for flash compensation, zone and ratio control
Adjust the manual power settings of your remote Canon Speedlites directly from a 580EX II flash mounted on your on-camera MiniTT1 or FlexTT5. Working with a Canon 580EX II in the shoe of the MiniTT1 or FlexTT5, you can independently control the power output of up to three groups of lights (you can have as many lights in each group as you want) from full power down to the lowest setting simply through the user interface on the back of the 580EX II. Now you can work with total control with your remote lights, without leaving your shooting position
Zone Select
The FlexTT5 Transceiver has an A-B-C zone select switch to allow use with the remote groups/zones found on on the PocketWizard AC3 ZoneController or Canon flashes. Zones allow you to control single or groups of lights independently from other lights in different zones. These zones can also be used with a MuiltiMAX thus allowing you to pair a single MultiMAX radio on camera with FlexTT5's Transceivers on your remote flashes and utilize many of the MultiMAX's advance trigger functions.
HyperSync™
Our patent pending HyperSync technology allows photographers to achieve faster X-sync speeds, sometimes up to 1/8000 of a second, with full power flash. Now you can cut the ambient light and use wide-open apertures, outdoors in bright sunlight. HyperSync automatically adjusts the timing of your flash trigger so that faster than X-sync speeds can be achieved. With certain Canon camera and flash combinations, you can achieve sync all the way to 1/8000th of a second. Just imagine what you can do using flash in bright sun with wide open apertures and fast shutter speeds. Since HyperSync is a trigger function you can use any PocketWizard Receiver including the FlexTT5, PlusX, Plus III, Plus II or MultiMAX. HyperSync works optimally with Studio flash. See Optimized HSS below for higher than XSync speeds with Speedlights,
HyperSync Automation adjusts HyperSync timing in two separate places – on the transmitter and on the receiving ControlTL radio. The transmitting or on-camera MiniTT1 or FlexTT5 automatically adjusts HyperSync to compensate for changes made to shutter speed. Photographers can further refine HyperSync via the PocketWizard Utility. For more information on Configuring HyperSync Automation, visit the HyperSync section of the PocketWizard Wiki
Optimized High SpeedSync (HSS)
When HyperSync can’t keep up, High Speed Sync takes over for Speedlite flash photography all the way to 1/8000. ControlTL optimizes this amazing feature and provides more light (which equals greater working distance), faster recycling times and more flashes per battery set when shooting in Canon's HSS/FP Flash mode. Use this feature to shoot wide open in bright sun for amazing results.
Optimized Rear Curtain Sync
Precise rear curtain sync capability is engaged automatically, no buttons to press. Set the shutter speed 2at which rear curtain sync is engaged with the PocketWizard Utility. Capture natural light trails with sharp exposures at the end
– no “after trails!
Pre-Flash Boost
In some E-TTL situations, including shooting in full sun, over long distance or using diffusers or bounce flash, the normal pre-flash is simply not enough for the camera to see. With Pre-Flash Boost, the pre-flash is two stops brighter. This will approximately double the working distance of E-TTL II, compensating for the light loss when defusing or bouncing
Power Tracking
When working with the PowerST4, PowerMC2 and AC9/FlexTT5 paired with compatible manual flashes, you can change any of your settings on your camera and the system adjusts for those changes. Change your flash exposure compensation to adjust the exposure or make adjustments in aperture or ISO and the system balances your flash for proper exposure
Basic Trigger Mode
Allows the MiniTT1 or FlexTT5 to work as a transmitter on ANY camera it will fit. Anyone looking for the small form factor of the MiniTT1 can use it on other DSLR’s, SLR’s or even medium format cameras with standard hot shoes. The MiniTT1 and FlexTT5 are completely reverse compatible with all previous PocketWizards so they will work with whatever PocketWizards you already own
PocketWizard Compatible
The FlexTT5 operates on the same channels as all other PocketWizards and will work with any unit you may already have
PocketWizard Utility - Programmable and Upgradeable
Use the supplied PocketWizard Utility software with the on-board USB port to program the FlexTT5 to any PocketWizard channel and zone as well as many other custom settings. The FlexTT5 can be upgraded whenever updates and feature enhancements are available (many planned!)
Auto-Sensing Transceiver Technology
PocketWizard's Auto-Sensing Transceiver Technology enables the FlexTT5 Transceiver to switch back and forth between Transmitter and Receiver modes as needed for greater flexibility on the job. All PocketWizard Transceivers default to Reciever mode. When a hot shoe or other trigger is detected, it automatically switches to Transmitter mode
Auto-Relay Mode
Easily trigger a remote camera in sync with distant remote flashes with Auto-Relay Mode. Put a camera where you can't be and have remote TTL or non-TTL lighting at the same time. Expand your coverage and increase your creativity
Channels / Learn Mode
The FlexTT5 has two channel configuration settings; C1 and C2. Each can be programmed as needed with up to 20 ControlTL channels* for TTL photography or Manual Power Control, or 32 standard channels** for manual flash photography. Channels can be configured with the PocketWizard utility or use the Learn function to quickly program channels, or the reset function to configure back to factory settings.
* - 20 ControlTL channels for FCC/IC 344 MHz radios and
three ControlTL channels for CE 433 MHz radios.
** - 32 Standard channels for FCC/IC 344 MHz radios and
35 Standard channels for CE 433 MHz radios
ZoneControl
Add the AC3 ZoneController on top of your FlexTT5 and gain three zones of power control right from the camera’s position. Works in both auto/CLS/i-TTL and manual. Shut down an entire zone with the flick of a switch.
AC3 ZoneController sold separately.
SpeedCycler with an AC3 ZoneController
Previously only seen with PocketWizard’s MultiMAX radios, this new mode is designed to rapidly cycle through multiple flash units fired individually in sequence. This allows photographers to fire a camera in sync with flashes faster than a single flash unit can recycle. It can also be used for triggering remote cameras sequentially. SpeedCycler is engaged on a transmitting MiniTT1 or FlexTT5 via the PocketWizard Utility.
SpeedCycler mode requires an AC3 ZoneController in the top hot-shoe of the on-camera PocketWizard radio. Zones A, B, and C will be triggered sequentially and individual zones can be disabled by setting the AC3’s Zone Switch to the off position. Both TTL and manual flash controls are supported.
Flash Power Control without a Camera
Photographers can now take their AC3 and transmitting radio off-camera and use it to set power levels for any flash with a ControlTL receiver, making it more convenient to use an optically triggered light meter, or control the power levels with just a MiniTT1/FlexTT5 and AC3 in their hand while another photographer takes the pictures. Previously, an AC3 ZoneController on a MiniTT1 or FlexTT5 needed to be on camera to send manual power levels to remote flashes. Now, when connected to a MiniTT1 or FlexTT5, manual power levels are transmitted to remote flashes when the TEST button is pressed even when the transmitter is off the camera. This affects both speedlights connected to receiving FlexTT5s and larger flashes like AlienBees and Elinchrom RX units with ControlTL receivers
Camera/Flash Ports
The FlexTT5 Transceiver has two plug-in ports for use with remote E-TTL II cameras and other flash units, including studio strobes. With its auto-relay function, the Flex can trigger a remote camera and transmit to a remote strobe
Continuous Fast FPS
Never before have you been able to shoot remote E-TTL non-stop in continuous high-speed mode. Fill the buffer! Nothing else comes close
Low-Profile Design
The FlexTT5 lies flat, stays out of the way and features a flip-up antenna for additional range when needed
High Speed Sync (HSS or FP Sync) Disable Mode
Select either HSS Sync or HyperSync™ at shutter speeds at or over 1/640. This allows you to use HyperSync and the benefit of full power flash all the way up to 1/8000 with certain flash systems.
Auto Trigger Select for ControlTL
The hot shoe on both the MiniTT1 and Flex TT5 will trigger just about any hot shoe flash placed into it in addition to the Canon Speedlite’s it is designed for. Yes, you can now fire just about any hot shoe flash including Vivatar, Nikon, etc., in manual mode only and not TTL mode. (max trigger voltage < 50V, use P2 port for up to 200V)
Built-in Hot Shoe
Lock your Canon flash into the FlexTT5’s dedicated hot shoe and combine your remote flash with on-camera flash or use the on-camera flash for additional E-TTL II or Manual Power Control only. The metal and glass reinforced resin hot shoe assembly is a superstructure onto itself and incredibly durable. The best part; no more cords.
Continuous Remote Camera Triggering
This allows for triggering a continuous motor drive burst of a camera connected to the P1 port on a remote FlexTT5.
Transmit Only Mode
This prevents triggering of a flash mounted on a FlexTT5 to be used as a transmitter by other photographers in the area using PocketWizard radios.
Specifications
|
TTL Compatibility: |
Canon E-TTL II |
|
Frequency: |
FCC/IC model: 340.00-354.00 MHz North America |
|
Channels: |
52 Channels over 26 Frequencies (FCC/IC) |
|
Antenna: |
2.7" (6.9 cm) rubberized with 180 degree swing |
|
Transmit output power: |
Less than 0.001 watt (1/1000 of a watt or 1 milliwatt) |
|
Range Performance: |
Up to 10 to 240 meters (30 to 800 feet for E-TTL triggering. Up to 10 to 365 meters (30 to 1200 feet) for basic triggering. Range is dependent on multiple factors including equipment, mode, environment, positioning, orientation and interference. |
|
Mounting: |
Hot Shoe, 1/4-20, lanyard, velcro |
|
Maximum Shooting Rate Frames per second (fps) |
8 fps for E-TTL II and normal triggering |
|
Power / Channel Switch |
OFF - C.2 - C.1 |
|
Zone Select Switch |
A-B-C (matches Canon slave groups) |
|
Status Indicator |
LED: Green, Amber, Red status indications |
|
Camera / P1 Port |
1/8" (3.5 mm) stereo miniphone for 2-stage remote camera triggering. Port Voltage Handling: up to 50 Volts, 100 milliamp continuous |
|
Flash / P2 Port |
1/8" (3.5 mm) mono miniphone. Port Voltage Handling: up to 200 Volts, 4 amps peak, 250 milliamp continuous, non-polarized |
|
Minimum Receive Contact Time |
Camera / P1 Port = 80 milliseconds Flash / P2 Port = 500us |
|
Voltage Present |
3.3 VDC (all pins) - safe for all cameras |
|
Hot Shoe voltage protection: |
Hot Shoe: up to 50V |
|
USB: |
USB Compliant 2.0, Mini-B Connector, 5VDC regulated, 100mA, Pin 1 Positive, Pin 4 Ground |
|
Operating Temperature |
Above -15° C (5° F) and below 50° C (120° F). |
|
Storage Temperature (without battery) |
Above -30 C (-22 F) and below 85 C (185 F) |
|
Construction |
High impact plastic, captive battery door |
|
Power |
Two (2) AA (IEC:LR6) Alkaline recommended, other chemistries (NiMH, NiCAD, Lithium) allowed, USB |
|
Battery Life |
60 + Hours |
|
Dimensions |
3.6" (9.2 cm) long x 2.9" (7.3 cm) wide x 1.4" (3.6 cm) tall, antenna lowered |
|
Weight |
5.4 oz (153 grams) 3.8 oz (108 grams) without batteries |
|
Included in the box |
FlexTT5 Transceiver, USB cable, Two (2) AA batteries, Quick Guide |
|
ROHS Compliant |
|
