$ 999.00 - Sold Out
DJI SKU: 7125 | Helix SKU: DJ7125
Dials, Levers, and Knobs
The two knobs on the front panel control gimbal pitch and yaw, and the right/left levers and Focus Adjustment Knob are used to tune flight controller settings and the gimbal camera in real-time, allowing you to pull focus and set aperture.
For quick camera adjustments, you can customize several shortcut buttons for particular groups of settings, or save frequently used settings.
Customizable buttons can quickly enable or disable frequently used functions like focus peaking, color waveform, obstacle avoidance, and home point resetting, or close warnings and tips midflight, all without using an app.
Rotate the dials or the toggle the right/left levers while holding certain buttons to control gimbal roll, shutter speed, aperture, or ISO.
Detachable Design, CrystalSky Compatibility
The CrystalSky monitor mounts to the Cendence remote controller via the Cendence Monitor Mounting Bracket.
The Cendence remote controller’s antennas, PCB, mounting bracket, and battery are all detachable, making its hardware easily upgradable, allowing you to customize the controller for compatibility with future DJI aircraft.
Dual Operator Control
When precision camera control is required, the Cendence remote controller can connect as either a master or slave controller with the Inspire 2’s remote controller or another Cendence remote controller.
Cendence uses a detachable battery that operates for up to four hours. If you run out of power, just swap in a charged battery or charge Cendence via the power port. Cendence uses the same batteries as CrystalSky monitors, enhancing product synergy.
Practical accessories make using Cendence easy.
The Cendence Support Rig takes on part of the controller’s weight, making it easier to hold for long periods of time.
Control Stick Covers prevent dust from entering both sticks, ensuring smooth and reliable control.
The Interchangeable Mobile Device Holder lets you attach a phone or tablet instead of a CrystalSky monitor.
Cendence Remote Controller × 1
WB37 Intelligent Battery × 1
Cendence Monitor Mounting Bracket × 1
Cendence Remote Controller Support Rig × 1
Screwdriver × 1
Screw × 2
Cendence Control Stick Cover × 2
Cendence Control Stick Cover Mounting Key × 1
Remote Controller Strap × 1
Matrice 200 Series
CrystalSky Intelligent Battery
Cadence - Mobile Device Holder
$ 156.99 - Sold Out
Meade SKU: 07640 | Helix SKU: ME07640
The Meade AudioStar features audio files and an internal speaker. This computerized celestial object locating system plugs into the telescope's handbox port allowing a quick telescope alignment.
Once aligned with the sky the AudioStar is ready to take you to any object in the over 30,000 object database. In addition to GOTO and tracking capability the AudioStar permits a wide array of fascinating and educational functions such as multiple Guided Tours, digital positional readouts, the ability to link with a PC using optionally available software and cord, and much more.
AudioStar Controller #07640 is compatable with the StarNavigator, ETX, LT, LX80, LX90, and LXD75 series telescopes.
Nikon D90, D3100, D3200, D3300, D5000, D5100, D5200, D5300, D5500, D7000, D7100, D7200, D600, D610, D750, Df, D90 and COOLPIX P7700, COOLPIX P7800, COOLPIX A
Mfr SKU: 25952 | Helix SKU: NK25952
The ML-L7 is a Remote Control that uses Bluetooth® to connect with select Nikon cameras. It allows photographers to control various camera functions on the camera as well as trigger the shutter from the remote, so you don't need to disrupt your shooting while super telephoto shooting or when using the camera on a tripod or in a remote location.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Nikon Corporation and its Affiliates is under license.
|Release Type||Wireless: Bluetooth|
|Transmitter Power Source||Battery|
|Package Weight||0.12 lb|
|Box Dimensions (LxWxH)||4.6 x 3.5 x 2"|
The Phottix Wired Remote Switch with 1m/3.28' C8 (Small) Cable for Canon EOS 1V/3/1D/1Ds/1DS, Mark II/1Ds, Mark III/1D, Mark II/1Ds, Mark III 10D/20D/30D/40D/50D/5D/5D,MkII/5D, MkIII/6D/7D Cameras features a compact remote switch with all functions of the camera's shutter release button. Particularly important to avoid camera moving, making it convenient and easy to use when taking long exposure photos.Half press on the shutter button will cause the camera to focus, full press will trigger the shutter and cause the camera to take a photo. For long exposures, press the release button completely and slide it in the direction of the arrow to lock the button in the depressed position. To unlock the button, slide it back to its original position. The C8 1m/3.28' extendable spiral cable connects compatible Phottix products to Canon EOS 1V/3/1D/1Ds/1DS, Mark II/1Ds, Mark III/1D, Mark II/1Ds, Mark III 10D/20D/30D/40D/50D/5D/5D, MkII/5D, MkIII/6D/7D Cameras.
The Pre-Release Trigger Adapter features a switch box and fits between the PocketWizard radios, current ACC and new one-foot length ACC-1 camera cables to add a switchable Pre-Release function. Use this combination for PocketWizard Plus II and MultiMAX radios in place of the previous PocketWizard Pre-Trigger-style Motor Drive cables.
Promaster Infrared Remote Control - for Olympus The PROMASTER wireless infrared remote control instantly triggers the shutter of your camera. A MUST HAVE accessory for anyone using a tripod. Perfect for taking pictures of subjects that are difficult to approach, or for close-up and time exposure photography. Helps to minimize vibration when using long telephoto lenses so you get much sharper pictures. Easy-to-replace CR2025 lithium battery Typical battery life: up to 3 years, 20,000 exposures Operation distance: 1cm-20 meters Dimension: 86 x 40 x 11.5 MM Weight: 22g
The PROMASTER SystemPRO Remote + offers you the convenience and flexibility of having both a wireless infrared remote and a modular wired remote all in a single device.
Sony A700 & A900 Cameras
Electromagnetic cable release. Operates AF & metering separately from shutter release, also features Running Lock.
For the T70, T90, EOS 650, 620, 750, 850, 630, 1, RT, A2, A2e, 1N & 1N-RS Cameras 1V, 1V-HS & EOS 3 Cameras Require Adapters