Ikelite Anti-Reflection Ring for Canon 16-35mm f/4 Lens
$ 10.00
Ikelite Anti-Reflection Ring for Canon 16-35mm f/4 Lens
Ikelite SKU: 0923.01 | Helix SKU: 092301
Overview
A self-adhesive vinyl label covers the white lettering and ring details on the front of the lens to reduce reflections when used behind a dome port underwater.
Designed specifically for use with the Canon EF 16-35mm f/4L IS USM lens.
Ikelite Anti-Reflection Ring for Canon 17-40mm f/4 USM Lens
$ 10.00
Ikelite Anti-Reflection Ring for Canon 17-40mm f/4 USM Lens
Ikelite SKU: 0923.02 | Helix SKU: 092302
Overview
A self-adhesive vinyl label covers the white lettering and ring details on the front of the lens to reduce reflections when used behind a dome port underwater.
Designed specifically for use with the Canon 17-40mm f/4 USM Lens.
Ikelite Anti-Reflection Ring for Canon 24-105mm Lenses
$ 10.00
Ikelite Anti-Reflection Ring for Canon 24-105mm Lenses
Ikelite SKU: 0923.06 | Helix SKU: 092306
Overview
A self-adhesive vinyl label covers the white lettering and ring details on the front of the lens to reduce reflections when used behind a dome port underwater.
Designed specifically for use with the following lenses:
- Canon EF 24-105mm f/4L IS USM
- Canon EF 24-105mm F3.5-5.6 IS STM
- Canon EF 24-105mm F4L IS II USM
Ikelite Australian-Plug for the Smart Charger
$ 2.95
Ikelite Australian-Plug for the Smart Charger - 017163
Ikelite Product Number 0171.63
Ikelite Base Extension for Release Handle
$ 24.95
Ikelite Base Extension for Release Handle - IK407703
Ikelite Base for 6800-Series DSLR & Mirrorless Housings
$ 59.95
Ikelite Base for 6800-Series DSLR & Mirrorless Housings - IK407766
Ikelite Base with Dual Handles for 6800-Series DSLR & Mirrorless Housings
$ 189.95
Ikelite Base with Dual Handles for 6800-Series DSLR & Mirrorless Housings - IK407768
Ikelite Base with Left Handle for 6800-Series DSLR & Mirrorless Housings
$ 124.95
Ikelite Base with Left Handle for 6800-Series DSLR & Mirrorless Housings - IK407767
Ikelite Battery Pack Cover for DS125, DS160, DS161
$ 15.00
Ikelite Battery Pack Cover for DS125, DS160, DS161
Ikelite SKU: 0591.4 | Helix SKU: 05914
Overview
The Battery Cover is designed to keep dirt and debris out of the battery pack charger socket and contact points when the battery pack is removed from the strobe front. This protective cap may be attached to the battery pack whenever storing or traveling with the battery pack separate from the strobe front.
The Battery Cover DOES NOT create a waterproof seal. Battery packs must be attached to a compatible strobe front to be waterproof.
Compatible with 4067 Li-Ion Battery Pack, 4066.5 NiMH Battery Pack, and 4066 Ni-Cad Battery Pack for DS125, DS160 and DS161 strobes. Battery Pack not included.
Ikelite Cable Grip for Housings
$ 89.95
Ikelite Cable Grip for Housings - 408007
Ikelite Cable Grip with Auxiliary Clamps
$ 189.95
Ikelite Cable Grip with Auxiliary Clamps - 408004
Ikelite Compact Ball Arm for Quick Release Handle
$ 179.00
Ikelite Compact Ball Arm for Quick Release Handle - 408005
Ikelite Connector Protector
$ 10.00
Ikelite Connector Protector - 0301
Ikelite Product Number 0301
Ikelite Connector Protector for Ikelite Sync Cord End
$ 12.95
Ikelite Connector Protector for Ikelite Sync Cord End
Ikelite SKU: 0301.12 | Helix SKU: 030112
Overview
Acetyl cover to protect the o-ring and contacts on the Ikelite plug of a sync cord. This connector protector is not waterproof and is not intended for use under pressure.
Ikelite Connector Protector for Nikonos Sync Cord End
$ 12.95
Ikelite Connector Protector for Nikonos Sync Cord End
Ikelite SKU: 0301.14 | Helix SKU: 030114
Overview
Acetyl cover to protect the o-ring and contacts on the Nikonos V type plug of a sync cord. This connector protector is not waterproof and is not intended for use under pressure. Not intended for use with non-Ikelite cords.
Ikelite CT1K Canon TTL Kit
$ 374.95
Ikelite CT1K Canon TTL Kit - IK46070
Overview
Ikelite CT2K Canon TTL Kit with Hotshoe
$ 374.95
Ikelite CT2K Canon TTL Kit with Hotshoe
Ikelite SKU: 46072 | Helix SKU: 46072
Overview
Add true TTL communication to your Ikelite DSLR or mirrorless housing to unlock the fastest rapid-firing and most accurate strobe exposure available. The TTL converter fits securely into the housing underneath the camera mounting tray with plug-and-play cabling for quick, simple installation.
Using TTL ("Thru-the-lens") metering, the camera evaluates the amount of light in the scene and the position of the subject and adjusts the external strobe(s)' power accordingly for a properly lit photo. All you need to do is set the strobe on TTL and pull the trigger.
Advantages to TTL
Several key advantages mean that you'll never miss the shot:
- You never have to change the power settings on your strobes.
- Your strobes will recycle faster.
- You can focus on your composition and camera settings.
- Your camera and strobe batteries will last longer.
- Support for Rear Curtain Sync flash mode.
A direct electrical connection to the strobe by sync cord means that the camera is aware that an external strobe is attached and can use this information for more accurate exposure. Strobe exposure compensation can be added or subtracted through the camera's menus.
Our internal TTL circuitry and hot shoe is designed for use with select Ikelite housings for Canon DSLR and mirrorless cameras, see Housing Compatibility below. Not intended for use with non-Ikelite housings.
Compatibility
- 200DL Housing for Canon EOS R # 71760
- 200DL Housing for Canon EOS RP # 71762
Not compatible with any other models except as listed above
Not intended for use with non-Ikelite housings
- Ikelite DS50 above serial # 70000
- Ikelite DS51
- Ikelite DS125 above serial # 5000
- Ikelite DS160, DS161
- Ikelite DS200 above serial # 7163
Ikelite Diffuser for DS161, DS160, DS125 Strobes
$ 10.00
Ikelite Diffuser for DS161, DS160, DS125 Strobes
Ikelite SKU: 0591.3 | Helix SKU: 05913
Overview
Diffuser for DS161, DS160 and DS125 type strobes. This diffuser increases angle of coverage by approximately 10 degrees, with a one f/stop reduction in intensity. Includes two lanyard holes.
Ikelite Diffuser for DS50, DS51, AF35 Strobes
$ 9.95
Ikelite Diffuser for DS50, DS51, AF35 Strobes
Ikelite SKU: 0561.2 | Helix SKU: 05612
Overview
Snap-in diffuser for DS50, DS51, and AF35 type strobes. This diffuser increases angle of coverage by approximately 10-degrees, with a one f/stop reduction in intensity. Includes two lanyard holes.
Ikelite Diffuser M27 for Gamma
$ 14.95
Ikelite Diffuser M27 for Gamma
Ikelite SKU: 1870 | Helix SKU: 1870
Overview
Threads onto the front of the Gamma and other lights with M27 thread to spread out beam for use as a video or focus assist light. A special material provides exceptional light transmission and an extremely smooth pattern. Includes diffuser and lanyard.
Ikelite DL 20mm Port Extension
$ 199.95
Ikelite DL 20mm Port Extension - IK75020
Ikelite DL 28mm Port Extension
$ 224.95
Ikelite DL 28mm Port Extension - IK75028
Ikelite DL 42mm Port Extension
$ 249.95
Ikelite DL 42mm Port Extension - IK75042
Ikelite DL 50mm Port Extension
$ 274.95
Ikelite DL 50mm Port Extension - IK75050
Ikelite DL 8 Inch Dome Port
$ 495.00
Ikelite DL 8 Inch Dome Port - IK75340
Ikelite DL 8 inch Dome Port with Extended Base
$ 549.95
Ikelite DL 8 inch Dome Port with Extended Base - IK75342
Ikelite DL Compact 8 inch Dome Port
$ 395.00
Ikelite DL Compact 8 inch Dome Port - IK75344
Ikelite DL Compact 8 inch Dome Port Extended
$ 349.95
Ikelite DL Compact 8 inch Dome Port Extended
Ikelite SKU: 75348 | Helix SKU: 75348
Overview
A low volume dome which provides similar image quality to our standard 8” dome port in with a reduced size ideal for close focus wide angle and great for travel. This port was originally designed for use with the Tokina 10-17mm Fisheye lens when used with compatible 200DL and 50 DL housings.
This port can be attached directly to housings featuring the Dry Lock (DL) port system or combined with DL extensions.
Specifications
Optical grade acrylic dome
Acetyl body
6.2" diameter x 2.1" (157 x 53 mm)
Weighs 10.4 oz (295 g)
In the Box
Dome port
Securing thumbscrews (set of 3) # 9249.7 (installed)
Dome shade # 75346 (installed)
Neoprene cover # 0200.1 (installed)
Silicone lubricant 1cc tube
Ikelite DL Macro Flat Port
$ 374.95
Ikelite DL Macro Flat Port - IK75301
Ikelite DL System Zoom Gear Retainer
$ 49.95
Ikelite DL System Zoom Gear Retainer - IK75900
Ikelite DL1 DS Link Nikon TTL Converter Ikelite NT2 Hotshoe Kit
$ 375.00
Ikelite DL1 DS Link Nikon TTL Converter Ikelite NT2 Hotshoe Kit
Ikelite SKU: 46054 | Helix SKU: 46054
Overview
We pioneered underwater TTL flash exposure for DSLR and Mirrorless cameras and this is the next iteration of our world renowned Nikon TTL flash circuitry.
Key Advantages
- Faster, more accurate, and more reliable than fiber optic TTL triggers
- Always ready when you are - no batteries required
- Switch between TTL and manual exposure with the press of a button
- Supports flash exposure (EV) compensation set in the camera
- Supports rear curtain sync
- Improves strobe battery life and recycle time
- One TTL converter supports a wide selection of camera models
- Independently waterproof sealed
- Includes NT2 TTL Hotshoe for use with compatible Ikelite DL DSLR and Mirrorless housings
About Nikon TTL
TTL or "Thru-the-Lens" flash metering means the camera evaluates the scene and communicates exposure information directly to the compatible flash. The camera automatically adjusts the power output of the external flash so you don't have to.
TTL exposure is faster and often more accurate than setting the flash output manually. TTL can be the difference between getting a properly exposed image or not, especially when shooting fast-moving subjects and subjects that are moving towards or away from you. TTL is by far the easiest way to shoot perfectly exposed macro photography and allows you to concentrate on focus and framing. When shooting wide angle or close focus wide angle (CFWA), set your camera to properly expose the background and let the DL1 adjust your strobe intensity for proper exposure of the foreground.
Ikelite was the first company to introduce TTL for underwater strobes with Nikon DSLR cameras, and continues to set the standard for accuracy of Nikon TTL flash protocol.
ISO 100 • f/22 • 1/160 • Nikon D850 with DL1 DS Link TTL Converter and two DS161 strobes
Electrical flash triggering
Connecting an electrical sync cord is as quick and easy as screwing in a light bulb. Electrical triggering supports greater accuracy, faster rapid firing, and less missed flashes as compared to fiber optic triggering. Use of electrical TTL also dramatically increases strobe battery life.
The included NT2 Nikon TTL Hotshoe is necessary for TTL operation with most Ikelite DL DSLR housings. See Housing Compatibility information below.
The ultimate flexibility
Switch between TTL and manual flash exposure modes with the simple push of a button. A super bright LED indicator light shows you which mode you are in with a quick glance. When in TTL mode, flash exposure (EV) compensation can be accessed quickly and easily through the camera's menus. The DL1 DS Link fully supports rear curtain sync flash modes.
The DL1 DS Link is independently waterproof sealed and can be used with a wide array of camera models. Simply use a dual sync cord to fire two strobes in TTL from a single DL1 DS Link converter.
ISO 100 • f/11 • 1/125 • Nikon D850 with DL1 DS Link TTL Converter and two DS161 strobes
This product replaces the Nikon TTL Converters # 4301 / 4301.2 / 4301.3.
Compatibility
Housing Compatibility
- Ikelite 200DL Housing for Nikon D500 # 71005
- Ikelite 200DL Housing for Nikon D7100, D7200 # 71001
- Ikelite 200DL Housing for Nikon D750 # 71007
- Ikelite 200DL Housing for Nikon D7500 # 71017
- Ikelite 200DL Housing for Nikon D800, D800E # 71011
- Ikelite 200DL Housing for Nikon D810 # 71009
- Ikelite 200DL Housing for Nikon D850 # 71015
- Ikelite 200DL Housing for Nikon Z7 # 71063
- Ikelite 50DL Housing for Nikon D500 # 73005
- Non-Ikelite housings for Nikon DSLR cameras featuring a TTL flash hotshoe and Ikelite ICS-5 bulkhead; If you are unsure whether your housing meets these requirements, please contact the manufacturer.
Camera Compatibility
- Nikon D2X, D3, D4
- Nikon D40, D50, D60, D70, D70s, D80, D90
- Nikon D200, D300, D300s
- Nikon D500
- Nikon D600, D610, D700, D750
- Nikon D800, D810, D850
- Nikon D3300, D3400, D3500
- Nikon D5000, D5100, D5200, D5300, D5500, D5600
- Nikon D7000, D7100, D7200, D7500
- Nikon Z6, Z7
Strobe Compatibility
- DS50 strobes: above serial number 75510 with update
- DS51 strobes: above serial number 78700
- DS125 strobes: above serial number 7928
- DS160, DS161 strobes: all
- DS200 strobes: above serial number 7163
- Not compatible with non-digital Ikelite strobes including but not limited to SS50, SS200, SS400, Ai, 100/A
- Not compatible with SEA&SEA, INON, or other non-Ikelite strobes
Sync Cord Compatibility
- Ikelite Housing to Ikelite Strobes # 45151
- Ikelite Housing to Two Ikelite Strobes # 45152
- Ikelite Housing to Ikelite Strobe # 4103.51 (out of production)
- Ikelite Housing to Two Ikelite Strobes # 4103.52 (out of production)
What's Included
DL1 DS Link TTL converter
Plug o-ring # 0136.13 (installed)
Connector protector for plug # 0301.12 (installed)
Waterproof Bulkhead Cap # 9104.7 (installed)
NT2 Nikon TTL Hotshoe # 46064
Silicone lubricant 1cc tube
Ikelite DL1 DS Link Nikon TTL Converter Ikelite NT3 Hotshoe Kit
$ 375.00
Ikelite DL1 DS Link Nikon TTL Converter Ikelite NT3 Hotshoe Kit
Ikelite SKU: 46056 | Helix SKU: 46056
Overview
We pioneered underwater TTL flash exposure for DSLR and mirrorless cameras and this is the next iteration of our world renowned Nikon TTL flash circuitry.
Key Advantages
- Faster, more accurate, and more reliable than fiber optic TTL triggers
- Always ready when you are - no batteries required
- Switch between TTL and manual exposure with the press of a button
- Supports flash exposure (EV) compensation set in the camera
- Supports rear curtain sync
- Improves strobe battery life and recycle time
- One TTL converter supports a wide selection of camera models
- Independently waterproof sealed
- Includes NT3 TTL Hotshoe for use with compatible Ikelite DSLR and mirrorless housings
About Nikon TTL
TTL or "Thru-the-Lens" flash metering means the camera evaluates the scene and communicates exposure information directly to the compatible flash. The camera automatically adjusts the power output of the external flash so you don't have to.
TTL exposure is faster and often more accurate than setting the flash output manually. TTL can be the difference between getting a properly exposed image or not, especially when shooting fast-moving subjects and subjects that are moving towards or away from you. TTL is by far the easiest way to shoot perfectly exposed macro photography and allows you to concentrate on focus and framing. When shooting wide angle or close focus wide angle (CFWA), set your camera to properly expose the background and let the DL1 adjust your strobe intensity for proper exposure of the foreground.
Ikelite was the first company to introduce TTL for underwater strobes with Nikon DSLR cameras, and continues to set the standard for accuracy of Nikon TTL flash protocol.
ISO 100 • f/22 • 1/160 • Nikon D850 with DL1 DS Link TTL Converter and two DS161 strobes
Electrical flash triggering
Connecting an electrical sync cord is as quick and easy as screwing in a light bulb. Electrical triggering supports greater accuracy, faster rapid firing, and less missed flashes as compared to fiber optic triggering. Use of electrical TTL also dramatically increases strobe battery life.
The included NT3 Nikon TTL Hotshoe is necessary for TTL operation with select Ikelite DSLR and mirrorless housings. See Housing Compatibility information below.
The ultimate flexibility
Switch between TTL and manual flash exposure modes with the simple push of a button. A super bright LED indicator light shows you which mode you are in with a quick glance. When in TTL mode, flash exposure (EV) compensation can be accessed quickly and easily through the camera's menus. The DL1 DS Link fully supports rear curtain sync flash modes.
The DL1 DS Link is independently waterproof sealed and can be used with a wide array of camera models. Simply use a dual sync cord to fire two strobes in TTL from a single DL1 DS Link converter.
ISO 100 • f/11 • 1/125 • Nikon D850 with DL1 DS Link TTL Converter and two DS161 strobes
This product replaces the Nikon TTL Converters # 4301 / 4301.2 / 4301.3.
Compatibility
Housing Compatibility
- Ikelite 200DLM/C Housing for Nikon D3500 # 6902.35
- Ikelite 200DLM/C Housing for Nikon D5500, D5600 # 6902.56
- Ikelite 200DL Housing for Nikon Z7 # 71063
Camera Compatibility
- Nikon D2X, D3, D4
- Nikon D40, D50, D60, D70, D70s, D80, D90
- Nikon D200, D300, D300s
- Nikon D500
- Nikon D600, D610, D700, D750
- Nikon D800, D810, D850
- Nikon D3300, D3400, D3500
- Nikon D5000, D5100, D5200, D5300, D5500, D5600
- Nikon D7000, D7100, D7200, D7500
- Nikon Z6, Z7
Strobe Compatibility
- DS50 strobes: above serial number 75510 with update
- DS51 strobes: above serial number 78700
- DS125 strobes: above serial number 7928
- DS160, DS161 strobes: all
- DS200 strobes: above serial number 7163
- Not compatible with non-digital Ikelite strobes including but not limited to SS50, SS200, SS400, Ai, 100/A
- Not compatible with SEA&SEA, INON, or other non-Ikelite strobes
Sync Cord Compatibility
- Ikelite Housing to Ikelite Strobes # 45151
- Ikelite Housing to Two Ikelite Strobes # 45152
- Ikelite Housing to Ikelite Strobe # 4103.51 (out of production)
- Ikelite Housing to Two Ikelite Strobes # 4103.52 (out of production)
What's Included
DL1 DS Link TTL converter
Plug o-ring # 0136.13 (installed)
Connector protector for plug # 0301.12 (installed)
Waterproof Bulkhead Cap # 9104.7 (installed)
NT3 Nikon TTL Hotshoe # 46066
Silicone lubricant 1cc tube
Ikelite DL1 DS Link Nikon TTL Converter with Ikelite Connector
$ 350.00
Ikelite DL1 DS Link Nikon TTL Converter with Ikelite Connector
Ikelite SKU: 46051 | Helix SKU: 46051
Overview
We pioneered underwater TTL flash exposure for DSLR and mirrorless cameras and this is the next iteration of our world renowned Nikon TTL flash circuitry.
Key Advantages
- Faster, more accurate, and more reliable than fiber optic TTL triggers
- Always ready when you are - no batteries required
- Switch between TTL and manual exposure with the press of a button
- Supports flash exposure (EV) compensation set in the camera
- Supports rear curtain sync
- Improves strobe battery life and recycle time
- One TTL converter supports a wide selection of camera models
- Independently waterproof sealed
About Nikon TTL
TTL or "Thru-the-Lens" flash metering means the camera evaluates the scene and communicates exposure information directly to the compatible flash. The camera automatically adjusts the power output of the external flash so you don't have to.
TTL exposure is faster and often more accurate than setting the flash output manually. TTL can be the difference between getting a properly exposed image or not, especially when shooting fast-moving subjects and subjects that are moving towards or away from you. TTL is by far the easiest way to shoot perfectly exposed macro photography and allows you to concentrate on focus and framing. When shooting wide angle or close focus wide angle (CFWA), set your camera to properly expose the background and let the DL1 adjust your strobe intensity for proper exposure of the foreground.
Ikelite was the first company to introduce TTL for underwater strobes with Nikon digital cameras, and continues to set the standard for accuracy of Nikon TTL flash protocol.
ISO 100 • f/22 • 1/160 • Nikon D850 with DL1 DS Link TTL Converter and two DS161 strobes
Electrical flash triggering
Connecting an electrical sync cord is as quick and easy as screwing in a light bulb. Electrical triggering supports greater accuracy, faster rapid firing, and less missed flashes as compared to fiber optic triggering. Use of electrical TTL also dramatically increases strobe battery life.
A compatible Nikon TTL hotshoe is necessary for TTL operation. Ikelite TTL hotshoes are designated by a yellow band at the connector end.
The ultimate flexibility
Switch between TTL and manual flash exposure modes with the simple push of a button. A super bright LED indicator light shows you which mode you are in with a quick glance. When in TTL mode, flash exposure (EV) compensation can be accessed quickly and easily through the camera's menus. The DL1 DS Link fully supports rear curtain sync flash modes.
The DL1 DS Link is independently waterproof sealed and can be used with a wide array of camera models. Simply use a dual sync cord to fire two strobes in TTL from a single DL1 DS Link converter.
ISO 100 • f/11 • 1/125 • Nikon D850 with DL1 DS Link TTL Converter and two DS161 strobes
This product replaces the Nikon TTL Converters # 4301 / 4301.2 / 4301.3.
Compatibility
Housing Compatibility
- Ikelite housings for Nikon DSLR or mirrorless cameras featuring a TTL flash hotshoe and Ikelite ICS-5 bulkhead
- Non-Ikelite housings for Nikon DSLR or mirrorless cameras featuring a TTL flash hotshoe and Ikelite ICS-5 bulkhead; If you are unsure whether your housing meets these requirements, please contact the manufacturer.
Camera Compatibility
- Nikon D2X, D3, D4
- Nikon D40, D50, D60, D70, D70s, D80, D90
- Nikon D200, D300, D300s
- Nikon D500
- Nikon D600, D610, D700, D750
- Nikon D800, D810, D850
- Nikon D3300, D3400, D3500
- Nikon D5000, D5100, D5200, D5300, D5500, D5600
- Nikon D7000, D7100, D7200, D7500
- Nikon Z6, Z7
Strobe Compatibility
- DS50 strobes: above serial number 75510 with update
- DS51 strobes: above serial number 78700
- DS125 strobes: above serial number 7928
- DS160, DS161 strobes: all
- DS200 strobes: above serial number 7163
- Not compatible with non-digital Ikelite strobes including but not limited to SS50, SS200, SS400, Ai, 100/A
- Not compatible with SEA&SEA, INON, or other non-Ikelite strobes
Sync Cord Compatibility
- Ikelite Housing to Ikelite Strobes # 45151
- Ikelite Housing to Two Ikelite Strobes # 45152
- Ikelite Housing to Ikelite Strobe # 4103.51 (out of production)
- Ikelite Housing to Two Ikelite Strobes # 4103.52 (out of production)
What's Included
DL1 DS Link TTL converter
Plug o-ring # 0136.13 (installed)
Connector protector for plug # 0301.12 (installed)
Waterproof Bulkhead Cap # 9104.7 (installed)
Silicone lubricant 1cc tube
Ikelite DL1 DS Link Nikon TTL Converter with Nikonos N5 Connector
$ 395.00
Ikelite DL1 DS Link Nikon TTL Converter with Nikonos N5 Connector
Ikelite SKU: 46055 | Helix SKU: 46055
Overview
We pioneered underwater TTL flash exposure for DSLR and Mirrorless cameras and this is the next iteration of our world renowned Nikon TTL flash circuitry. Provided with a Nikonos N5 connector for use with a wide variety of other manufacturers' DSLR and Mirrorless housings.
Key Advantages
- Faster, more accurate, and more reliable than fiber optic TTL triggers
- Always ready when you are - no batteries required
- Switch between TTL and manual exposure with the press of a button
- Supports flash exposure (EV) compensation set in the camera
- Supports rear curtain sync
- Improves strobe battery life and recycle time
- One TTL converter supports a wide selection of camera models
- Independently waterproof sealed
- Standard Nikonos N5 type connector at housing end
About Nikon TTL
TTL or "Thru-the-Lens" flash metering means the camera evaluates the scene and communicates exposure information directly to the compatible flash. The camera automatically adjusts the power output of the external flash so you don't have to.
TTL exposure is faster and often more accurate than setting the flash output manually. TTL can be the difference between getting a properly exposed image or not, especially when shooting fast-moving subjects and subjects that are moving towards or away from you. TTL is by far the easiest way to shoot perfectly exposed macro photography and allows you to concentrate on focus and framing. When shooting wide angle or close focus wide angle (CFWA), set your camera to properly expose the background and let the DL1 adjust your strobe intensity for proper exposure of the foreground.
Ikelite was the first company to introduce TTL for underwater strobes with Nikon DSLR cameras, and continues to set the standard for accuracy of Nikon TTL flash protocol.
ISO 100 • f/22 • 1/160 • Nikon D850 with DL1 DS Link TTL Converter and two DS161 strobes
Electrical flash triggering
Connecting an electrical sync cord is as quick and easy as screwing in a light bulb. Electrical triggering supports greater accuracy, faster rapid firing, and less missed flashes as compared to fiber optic triggering. Use of electrical TTL also dramatically increases strobe battery life.
Use of this TTL Converter requires a Nikonos N5-style electrical bulkhead strobe connector and TTL hotshoe (not included). This type of connection is offered by a wide variety of housing manufacturers including Aquatica, Nauticam, Subal, Seacam, SEA&SEA, Isotta, and others. If you are unsure whether your housing meets these requirements, please contact the housing manufacturer.
The ultimate flexibility
Switch between TTL and manual flash exposure modes with the simple push of a button. A super bright LED indicator light shows you which mode you are in with a quick glance. When in TTL mode, flash exposure (EV) compensation can be accessed quickly and easily through the camera's menus. The DL1 DS Link fully supports rear curtain sync flash modes.
The DL1 DS Link is independently waterproof sealed and can be used with a wide array of camera models. Simply use a dual sync cord to fire two strobes in TTL from a single DL1 DS Link converter.
ISO 100 • f/11 • 1/125 • Nikon D850 with DL1 DS Link TTL Converter and two DS161 strobes
This product replaces the Nikon TTL Converters # 4302 / 4302.2 / 4302.3.
Compatibility
Housing Compatibility
- Non-Ikelite housings for Nikon DSLR cameras featuring a TTL flash hotshoe and Nikonos N5 bulkhead; If you are unsure whether your housing meets these requirements, please contact the manufacturer.
Camera Compatibility
- Nikon D2X, D3, D4
- Nikon D40, D50, D60, D70, D70s, D80, D90
- Nikon D200, D300, D300s
- Nikon D500
- Nikon D600, D610, D700, D750
- Nikon D800, D810, D850
- Nikon D3300, D3400, D3500
- Nikon D5000, D5100, D5200, D5300, D5500, D5600
- Nikon D7000, D7100, D7200, D7500
- Nikon Z6, Z7
Strobe Compatibility
- DS50 strobes: above serial number 75510 with update
- DS51 strobes: above serial number 78700
- DS125 strobes: above serial number 7928
- DS160, DS161 strobes: all
- DS200 strobes: above serial number 7163
- Not compatible with non-digital Ikelite strobes including but not limited to SS50, SS200, SS400, Ai, 100/A
- Not compatible with SEA&SEA, INON, or other non-Ikelite strobes
Sync Cord Compatibility
- Ikelite Housing to Ikelite Strobes # 45151
- Ikelite Housing to Two Ikelite Strobes # 45152
- Ikelite Housing to Ikelite Strobe # 4103.51 (out of production)
- Ikelite Housing to Two Ikelite Strobes # 4103.52 (out of production)
What's Included
DL1 DS Link TTL converter
Plug o-ring # 0136.13 (installed)
Connector protector for plug # 0301.12 (installed)
Waterproof Bulkhead Cap # 9104.7 (installed)
Silicone lubricant 1cc tube
Ikelite DL2 DS Link Sony TTL Converter Ikelite ST1 Hotshoe and B1A Bulkhead Kit
$ 450.00
Ikelite DL2 DS Link Sony TTL Converter Ikelite ST1 Hotshoe and B1A Bulkhead Kit
Ikelite SKU: 46045 | Helix SKU: 46045
Overview
We pioneered underwater TTL flash exposure for DSLR and mirrorless cameras and this is the next iteration of our world renowned Sony TTL flash circuitry.
Key Advantages
- Faster, more accurate, and more reliable than fiber optic TTL triggers
- Always ready when you are - no batteries required
- Switch between TTL and manual exposure with the press of a button
- Supports flash exposure (EV) compensation set in the camera
- Supports rear curtain sync
- Improves strobe battery life and recycle time
- One TTL converter supports a wide selection of camera models
- Independently waterproof sealed
About Sony TTL
TTL or "Thru-the-Lens" flash metering means the camera evaluates the scene and communicates exposure information directly to the compatible flash. The camera automatically adjusts the power output of the external flash so you don't have to.
TTL exposure is faster and usually more accurate than setting the flash output manually. TTL can be the difference between getting a properly exposed image or not, especially when shooting fast-moving subjects and subjects that are moving towards or away from you. TTL is by far the easiest way to shoot perfectly exposed macro photography and allows you to concentrate on focus and framing.
Some people think TTL is only good for macro... but they're wrong! When shooting wide angle or close focus wide angle (CFWA), set your camera to properly expose the background and let the DL2 adjust your strobe intensity for proper exposure of the foreground.
Ikelite was the first company to introduce TTL for underwater strobes with Sony DSLR and mirrorless digital cameras, and continues to set the standard for accuracy of Sony TTL flash protocol.
Electrical flash triggering
Connecting an electrical sync cord is as quick and easy as screwing in a light bulb. Electrical triggering supports greater accuracy, faster rapid firing, and less missed flashes as compared to fiber optic triggering. Use of electrical TTL also dramatically increases strobe battery life.
The included ST1 Sony TTL Hotshoe and B1A Bulkhead are necessary for TTL operation with most Ikelite DLM housings. See Housing Compatibility information below.
The ultimate flexibility
Switch between TTL and manual flash exposure modes with the simple push of a button. A super bright LED indicator light shows you which mode you are in with a quick glance. When in TTL mode, flash exposure (EV) compensation can be accessed quickly and easily through the camera's menus. The DL2 DS Link fully supports rear curtain sync flash modes.
The DL2 DS Link is independently waterproof sealed and can be used with a wide array of camera models. Simply use a dual sync cord to fire two strobes in TTL from a single DL2 DS Link converter.
Compatibility
Housing Compatibility
- Ikelite 200DLM/A Housing for Sony A6300, A6400, A6500 # 6911.64
- Non-Ikelite housings for Sony mirrorless cameras featuring 1/2" through or 1/2-20 threaded accessory port
Camera Compatibility
- Sony A6000, A6300, A6400, A6500
- Sony A7, A7R, A7S
- Sony A7 II, A7R II, A7S II
- Sony A7 III, A7R III
- Sony A9
Strobe Compatibility
- DS50 strobes: above serial number 75510 with update
- DS51 strobes: above serial number 78700
- DS125 strobes: above serial number 7928
- DS160, DS161 strobes: all
- DS200 strobes: above serial number 7163
- Not compatible with non-digital Ikelite strobes including but not limited to SS50, SS200, SS400, Ai, 100/A
- Not compatible with SEA&SEA, INON, or other non-Ikelite strobes
Sync Cord Compatibility
- Ikelite Housing to Ikelite Strobes # 45151
- Ikelite Housing to Two Ikelite Strobes # 45152
- Ikelite Housing to Ikelite Strobe # 4103.51 (out of production)
- Ikelite Housing to Two Ikelite Strobes # 4103.52 (out of production)
What's Included
DL2 DS Link TTL converter # 46043
ST1 Sony TTL Hotshoe # 46041
B1A Bulkhead # 46002
Ikelite DL2 DS Link Sony TTL Converter Ikelite ST1 Hotshoe Kit
$ 425.00
Ikelite DL2 DS Link Sony TTL Converter Ikelite ST1 Hotshoe Kit
Ikelite SKU: 46042 | Helix SKU: 46042
Overview
We pioneered underwater TTL flash exposure for DSLR and mirrorless cameras and this is the next iteration of our world renowned Sony TTL flash circuitry.
Key Advantages
- Faster, more accurate, and more reliable than fiber optic TTL triggers
- Always ready when you are - no batteries required
- Switch between TTL and manual exposure with the press of a button
- Supports flash exposure (EV) compensation set in the camera
- Supports rear curtain sync
- Improves strobe battery life and recycle time
- One TTL converter supports a wide selection of camera models
- Independently waterproof sealed
About Sony TTL
TTL or "Thru-the-Lens" flash metering means the camera evaluates the scene and communicates exposure information directly to the compatible flash. The camera automatically adjusts the power output of the external flash so you don't have to.
TTL exposure is faster and typically more accurate than setting the flash output manually. TTL can be the difference between getting a properly exposed image or not, especially when shooting fast-moving subjects and subjects that are moving towards or away from you. TTL is by far the easiest way to shoot perfectly exposed macro photography and allows you to concentrate on focus and framing.
Some people think TTL is only good for macro... but they're wrong! When shooting wide angle or close focus wide angle (CFWA), set your camera to properly expose the background and let the DL2 adjust your strobe intensity for proper exposure of the foreground.
Ikelite was the first company to introduce TTL for underwater strobes with Sony DSLR and mirrorless digital cameras, and continues to set the standard for accuracy of Sony TTL flash protocol.
Electrical flash triggering
Connecting an electrical sync cord is as quick and easy as screwing in a light bulb. Electrical triggering supports greater accuracy, faster rapid firing, and less missed flashes as compared to fiber optic triggering. Use of electrical TTL also dramatically increases strobe battery life.
The included ST1 Sony TTL Hotshoe is necessary for TTL operation with most Ikelite DL housings. See Housing Compatibility information below.
The ultimate flexibility
Switch between TTL and manual flash exposure modes with the simple push of a button. A super bright LED indicator light shows you which mode you are in with a quick glance. When in TTL mode, flash exposure (EV) compensation can be accessed quickly and easily through the camera's menus. The DL2 DS Link fully supports rear curtain sync flash modes.
The DL2 DS Link is independently waterproof sealed and can be used with a wide array of camera models. Simply use a dual sync cord to fire two strobes in TTL from a single DL2 DS Link converter.
Compatibility
Housing Compatibility
- Ikelite 200DL Housing for Sony A7, A7R, A7S # 71471
- Ikelite 200DL Housing for Sony A7 II, A7R II, A7S II # 71472
- Ikelite 200DL Housing for Sony A7 III, A7R III, A9 # 71473
- Non-Ikelite housings for Sony mirrorless cameras featuring a TTL flash hotshoe and Ikelite ICS-5 bulkhead; If you are unsure whether your housing meets these requirements, please contact the manufacturer.
Camera Compatibility
- Sony A6000, A6300, A6400, A6500
- Sony A7, A7R, A7S
- Sony A7 II, A7R II, A7S II
- Sony A7 III, A7R III
- Sony A9
Strobe Compatibility
- DS50 strobes: above serial number 75510 with update
- DS51 strobes: above serial number 78700
- DS125 strobes: above serial number 7928
- DS160, DS161 strobes: all
- DS200 strobes: above serial number 7163
- Not compatible with non-digital Ikelite strobes including but not limited to SS50, SS200, SS400, Ai, 100/A
- Not compatible with SEA&SEA, INON, or other non-Ikelite strobes
Sync Cord Compatibility
- Ikelite Housing to Ikelite Strobes # 45151
- Ikelite Housing to Two Ikelite Strobes # 45152
- Ikelite Housing to Ikelite Strobe # 4103.51 (out of production)
- Ikelite Housing to Two Ikelite Strobes # 4103.52 (out of production)
What's Included
DL2 DS Link TTL converter # 46043
ST1 Sony TTL hotshoe # 46041
Ikelite DL2 DS Link Sony TTL Converter with Ikelite Connector
$ 350.00
Ikelite DL2 DS Link Sony TTL Converter with Ikelite Connector
Ikelite SKU: 46043 | Helix SKU: 46043
Overview
We pioneered underwater TTL flash exposure for DSLR and mirrorless cameras and this is the next iteration of our world renowned Sony TTL flash circuitry.
Key Advantages
- Faster, more accurate, and more reliable than fiber optic TTL triggers
- Always ready when you are - no batteries required
- Switch between TTL and manual exposure with the press of a button
- Supports flash exposure (EV) compensation set in the camera
- Supports rear curtain sync
- Improves strobe battery life and recycle time
- One TTL converter supports a wide selection of camera models
- Independently waterproof sealed
About Sony TTL
TTL or "Thru-the-Lens" flash metering means the camera evaluates the scene and communicates exposure information directly to the compatible flash. The camera automatically adjusts the power output of the external flash so you don't have to.
TTL exposure is faster and often more accurate than setting the flash output manually. TTL can be the difference between getting a properly exposed image or not, especially when shooting fast-moving subjects and subjects that are moving towards or away from you. TTL is by far the easiest way to shoot perfectly exposed macro photography and allows you to concentrate on focus and framing.
Some people think TTL is only good for macro... but they're wrong! When shooting wide angle or close focus wide angle (CFWA), set your camera to properly expose the background and let the DL2 adjust your strobe intensity for proper exposure of the foreground.
Ikelite was the first company to introduce TTL for underwater strobes with Sony DSLR and mirrorless digital cameras, and continues to set the standard for accuracy of Sony TTL flash protocol.
Electrical flash triggering
Connecting an electrical sync cord is as quick and easy as screwing in a light bulb. Electrical triggering supports greater accuracy, faster rapid firing, and less missed flashes as compared to fiber optic triggering. Use of electrical TTL also dramatically increases strobe battery life.
A compatible Sony TTL hotshoe is necessary for TTL operation. Ikelite TTL hotshoes are designated by a yellow band at the connector end.
The ultimate flexibility
Switch between TTL and manual flash exposure modes with the simple push of a button. A super bright LED indicator light shows you which mode you are in with a quick glance. When in TTL mode, flash exposure (EV) compensation can be accessed quickly and easily through the camera's menus. The DL2 DS Link fully supports rear curtain sync flash modes.
The DL2 DS Link is independently waterproof sealed and can be used with a wide array of camera models. Simply use a dual sync cord to fire two strobes in TTL from a single DL2 DS Link converter.
Compatibility
Housing Compatibility
- Ikelite housings for Sony mirrorless cameras featuring a TTL flash hotshoe and Ikelite ICS-5 bulkhead
- Non-Ikelite housings for Sony mirrorless cameras featuring a TTL flash hotshoe and Ikelite ICS-5 bulkhead; If you are unsure whether your housing meets these requirements, please contact the manufacturer.
Camera Compatibility
- Sony A6000, A6300, A6400, A6500
- Sony A7, A7R, A7S
- Sony A7 II, A7R II, A7S II
- Sony A7 III, A7R III
- Sony A9
Strobe Compatibility
- DS50 strobes: above serial number 75510 with update
- DS51 strobes: above serial number 78700
- DS125 strobes: above serial number 7928
- DS160, DS161 strobes: all
- DS200 strobes: above serial number 7163
- Not compatible with non-digital Ikelite strobes including but not limited to SS50, SS200, SS400, Ai, 100/A
- Not compatible with SEA&SEA, INON, or other non-Ikelite strobes
Sync Cord Compatibility
- Ikelite Housing to Ikelite Strobes # 45151
- Ikelite Housing to Two Ikelite Strobes # 45152
- Ikelite Housing to Ikelite Strobe # 4103.51 (out of production)
- Ikelite Housing to Two Ikelite Strobes # 4103.52 (out of production)
What's Included
DL2 DS Link TTL converter
Plug o-ring # 0136.13 (installed)
Connector protector for plug # 0301.12 (installed)
Waterproof Bulkhead Cap # 9104.7 (installed)
Silicone lubricant 1cc tube
Ikelite DL3 DS Link Panasonic / Olympus TTL Converter Ikelite PT2 Hotshoe Kit
$ 375.00
Ikelite DL3 DS Link Panasonic / Olympus TTL Converter Ikelite PT2 Hotshoe Kit
Ikelite SKU: 46037 | Helix SKU: IK46037
TTL strobe exposure opens up a whole new world of creative possibilities for both wide angle and macro photographer. Let your camera control the strobe output so that you can devote your attention to adjusting your camera's settings, composing the shot, and focusing on your subject.
Key Advantages
- Faster, more accurate, and more reliable than fiber optic TTL triggers
- Always ready when you are - no batteries required
- Switch between TTL and manual exposure with the press of a button
- Supports flash exposure (EV) compensation set in the camera
- Supports rear curtain sync
- Improves strobe battery life and recycle time
- One TTL converter supports a wide selection of camera models
- Independently waterproof sealed
About TTL
TTL or "Thru-the-Lens" flash metering means the camera evaluates the scene and communicates exposure information directly to the compatible flash. The camera automatically adjusts the power output of the external flash so you don't have to.
TTL exposure is faster and typically more accurate than setting the flash output manually. TTL can be the difference between getting a properly exposed image or not, especially when shooting fast-moving subjects and subjects that are moving towards or away from you. TTL is by far the easiest way to shoot perfectly exposed macro photography and allows you to concentrate on focus and framing.
Some people think TTL is only good for macro... but they're wrong! When shooting wide angle or close focus wide angle (CFWA), set your camera to properly expose the background and let the DL2 adjust your strobe intensity for proper exposure of the foreground.
Ikelite was the first company to introduce TTL for underwater strobes with Olympus digital cameras, and continues to set the standard for accuracy of Olympus TTL flash protocol.
Electrical flash triggering
Connecting an electrical sync cord is as quick and easy as screwing in a light bulb. Electrical triggering supports greater accuracy, faster rapid firing, and less missed flashes as compared to fiber optic triggering. Use of electrical TTL also dramatically increases strobe battery life.
The included PT2 TTL Hotshoe is necessary for TTL operation with most Ikelite DL housings. See Housing Compatibility information below.
The ultimate flexibility
Switch between TTL and manual flash exposure modes with the simple push of a button. A super bright LED indicator light shows you which mode you are in with a quick glance. When in TTL mode, flash exposure (EV) compensation can be accessed quickly and easily through the camera's menus. The DL3 DS Link fully supports rear curtain sync flash modes.
The DL3 DS Link is independently waterproof sealed and can be used with a wide array of camera models. Simply use a dual sync cord to fire two strobes in TTL from a single DL3 DS Link converter.
Housing Compatibility
- Ikelite 200DL Housing for Panasonic Lumix DC-S1, DC-S1R # 71301
Strobe Compatibility
- DS50 strobes: above serial number 75510 with update
- DS51 strobes: above serial number 78700
- DS125 strobes: above serial number 7928
- DS160, DS161 strobes: all
- DS200 strobes: above serial number 7163
- Not compatible with non-digital Ikelite strobes including but not limited to SS50, SS200, SS400, Ai, 100/A
- Not compatible with SEA&SEA, INON, or other non-Ikelite strobes
Sync Cord Compatibility
- Ikelite Housing to Ikelite Strobes # 45151
- Ikelite Housing to Two Ikelite Strobes # 45152
- Ikelite Housing to Ikelite Strobe # 4103.51 (out of production)
- Ikelite Housing to Two Ikelite Strobes # 4103.52 (out of production)
Specifications
3.4 ounces (97g)
In the Box
DL3 DS Link TTL converter # 46033
PT2 Panasonic & Olympus TTL hotshoe # 46035
Ikelite DL4 DS Link Fujifilm TTL Converter Ikelite FT1 Hotshoe Kit
$ 375.00
Ikelite DL4 DS Link Fujifilm TTL Converter Ikelite FT1 Hotshoe Kit
Ikelite SKU: 46082 | Helix SKU: 46082
Overview
TTL strobe exposure opens up a whole new world of creative possibilities for both wide angle and macro photographer. Let your camera control the strobe output so that you can devote your attention to adjusting your camera's settings, composing the shot, and focusing on your subject.
Key Advantages
- Faster, more accurate, and more reliable than fiber optic TTL triggers
- Always ready when you are - no batteries required
- Switch between TTL and manual exposure with the press of a button
- Supports flash exposure (EV) compensation set in the camera
- Supports rear curtain sync
- Improves strobe battery life and recycle time
- One TTL converter supports a wide selection of camera models
- Independently waterproof sealed
- Includes FT1 TTL Hotshoe for use with compatible Ikelite DL Mirrorless housings
About Fujifilm TTL
TTL or "Thru-the-Lens" flash metering means the camera evaluates the scene and communicates exposure information directly to the compatible flash. The camera automatically adjusts the power output of the external flash so you don't have to.
TTL exposure is faster and often more accurate than setting the flash output manually. TTL can be the difference between getting a properly exposed image or not, especially when shooting fast-moving subjects and subjects that are moving towards or away from you. TTL is by far the easiest way to shoot perfectly exposed macro photography and allows you to concentrate on focus and framing. When shooting wide angle or close focus wide angle (CFWA), set your camera to properly expose the background and let the DL4 adjust your strobe intensity for proper exposure of the foreground.
Electrical flash triggering
Connecting an electrical sync cord is as quick and easy as screwing in a light bulb. Electrical triggering supports greater accuracy, faster rapid firing, and less missed flashes as compared to fiber optic triggering. Use of electrical TTL also dramatically increases strobe battery life.
The included FT1 TTL Hotshoe is necessary for TTL operation with most Ikelite DL Mirrorless housings. See Housing Compatibility information below.
The ultimate flexibility
Switch between TTL and manual flash exposure modes with the simple push of a button. A super bright LED indicator light shows you which mode you are in with a quick glance. When in TTL mode, flash exposure (EV) compensation can be accessed quickly and easily through the camera's menus. The DL4 DS Link fully supports rear curtain sync flash modes.
The DL4 DS Link is independently waterproof sealed and can be used with a wide array of camera models. Simply use a dual sync cord to fire two strobes in TTL from a single DL4 DS Link converter.
Compatibility
Housing Compatibility
- Ikelite 200DL Housing for Fujifilm X-T3 # 71503
Camera Compatibility
- Fujifilm X-T3
Strobe Compatibility
- DS50 strobes: above serial number 75510 with update
- DS51 strobes: above serial number 78700
- DS125 strobes: above serial number 7928
- DS160, DS161 strobes: all
- DS200 strobes: above serial number 7163
- Not compatible with non-digital Ikelite strobes including but not limited to SS50, SS200, SS400, Ai, 100/A
- Not compatible with SEA&SEA, INON, or other non-Ikelite strobes
Sync Cord Compatibility
- Ikelite Housing to Ikelite Strobes # 45151
- Ikelite Housing to Two Ikelite Strobes # 45152
- Ikelite Housing to Ikelite Strobe # 4103.51 (out of production)
- Ikelite Housing to Two Ikelite Strobes # 4103.52 (out of production)
What's Included
DL4 DS Link TTL converter
Plug o-ring # 0136.13 (installed)
Connector protector for plug # 0301.12 (installed)
Waterproof Bulkhead Cap # 9104.7 (installed)
FT1 TTL Hotshoe # 46081
Silicone lubricant 1cc tube
Ikelite DL4 DS Link Fujifilm TTL Converter with Ikelite ICS-5 Connector
$ 350.00
Ikelite DL4 DS Link Fujifilm TTL Converter with Ikelite ICS-5 Connector
Ikelite SKU: 46083 | Helix SKU: 46083
Overview
TTL strobe exposure opens up a whole new world of creative possibilities for both wide angle and macro photographer. Let your camera control the strobe output so that you can devote your attention to adjusting your camera's settings, composing the shot, and focusing on your subject.
Key Advantages
- Faster, more accurate, and more reliable than fiber optic TTL triggers
- Always ready when you are - no batteries required
- Switch between TTL and manual exposure with the press of a button
- Supports flash exposure (EV) compensation set in the camera
- Supports rear curtain sync
- Improves strobe battery life and recycle time
- One TTL converter supports a wide selection of camera models
- Independently waterproof sealed
About Fujifilm TTL
TTL or "Thru-the-Lens" flash metering means the camera evaluates the scene and communicates exposure information directly to the compatible flash. The camera automatically adjusts the power output of the external flash so you don't have to.
TTL exposure is faster and often more accurate than setting the flash output manually. TTL can be the difference between getting a properly exposed image or not, especially when shooting fast-moving subjects and subjects that are moving towards or away from you. TTL is by far the easiest way to shoot perfectly exposed macro photography and allows you to concentrate on focus and framing. When shooting wide angle or close focus wide angle (CFWA), set your camera to properly expose the background and let the DL4 adjust your strobe intensity for proper exposure of the foreground.
Electrical flash triggering
Connecting an electrical sync cord is as quick and easy as screwing in a light bulb. Electrical triggering supports greater accuracy, faster rapid firing, and less missed flashes as compared to fiber optic triggering. Use of electrical TTL also dramatically increases strobe battery life.
A compatible TTL hotshoe is necessary for TTL operation. Ikelite TTL hotshoes are designated by a yellow band at the connector end.
The ultimate flexibility
Switch between TTL and manual flash exposure modes with the simple push of a button. A super bright LED indicator light shows you which mode you are in with a quick glance. When in TTL mode, flash exposure (EV) compensation can be accessed quickly and easily through the camera's menus. The DL4 DS Link fully supports rear curtain sync flash modes.
The DL4 DS Link is independently waterproof sealed and can be used with a wide array of camera models. Simply use a dual sync cord to fire two strobes in TTL from a single DL4 DS Link converter.
Compatibility
Camera Compatibility
- Fujifilm X-T3
Strobe Compatibility
- DS50 strobes: above serial number 75510 with update
- DS51 strobes: above serial number 78700
- DS125 strobes: above serial number 7928
- DS160, DS161 strobes: all
- DS200 strobes: above serial number 7163
- Not compatible with non-digital Ikelite strobes including but not limited to SS50, SS200, SS400, Ai, 100/A
- Not compatible with SEA&SEA, INON, or other non-Ikelite strobes
Sync Cord Compatibility
- Ikelite Housing to Ikelite Strobes # 45151
- Ikelite Housing to Two Ikelite Strobes # 45152
- Ikelite Housing to Ikelite Strobe # 4103.51 (out of production)
- Ikelite Housing to Two Ikelite Strobes # 4103.52 (out of production)
What's Included
DL4 DS Link TTL converter
Plug o-ring # 0136.13 (installed)
Connector protector for plug # 0301.12 (installed)
Waterproof Bulkhead Cap # 9104.7 (installed)
Silicone lubricant 1cc tube
Ikelite DL4 DS Link Fujifilm TTL Converter with Nikonos N5 Connector
$ 395.00
Ikelite DL4 DS Link Fujifilm TTL Converter with Nikonos N5 Connector
Ikelite SKU: 46084 | Helix SKU: 46084
Overview
TTL strobe exposure opens up a whole new world of creative possibilities for both wide angle and macro photographer. Let your camera control the strobe output so that you can devote your attention to adjusting your camera's settings, composing the shot, and focusing on your subject.
Key Advantages
- Faster, more accurate, and more reliable than fiber optic TTL triggers
- Always ready when you are - no batteries required
- Switch between TTL and manual exposure with the press of a button
- Supports flash exposure (EV) compensation set in the camera
- Supports rear curtain sync
- Improves strobe battery life and recycle time
- One TTL converter supports a wide selection of camera models
- Independently waterproof sealed
- Standard Nikonos N5 type connector at housing end
About Fujifilm TTL
TTL or "Thru-the-Lens" flash metering means the camera evaluates the scene and communicates exposure information directly to the compatible flash. The camera automatically adjusts the power output of the external flash so you don't have to.
TTL exposure is faster and often more accurate than setting the flash output manually. TTL can be the difference between getting a properly exposed image or not, especially when shooting fast-moving subjects and subjects that are moving towards or away from you. TTL is by far the easiest way to shoot perfectly exposed macro photography and allows you to concentrate on focus and framing. When shooting wide angle or close focus wide angle (CFWA), set your camera to properly expose the background and let the DL4 adjust your strobe intensity for proper exposure of the foreground.
Electrical flash triggering
Connecting an electrical sync cord is as quick and easy as screwing in a light bulb. Electrical triggering supports greater accuracy, faster rapid firing, and less missed flashes as compared to fiber optic triggering. Use of electrical TTL also dramatically increases strobe battery life.
A compatible TTL hotshoe is necessary for TTL operation. Ikelite TTL hotshoes are designated by a yellow band at the connector end.
The ultimate flexibility
Switch between TTL and manual flash exposure modes with the simple push of a button. A super bright LED indicator light shows you which mode you are in with a quick glance. When in TTL mode, flash exposure (EV) compensation can be accessed quickly and easily through the camera's menus. The DL4 DS Link fully supports rear curtain sync flash modes.
The DL4 DS Link is independently waterproof sealed and can be used with a wide array of camera models. Simply use a dual sync cord to fire two strobes in TTL from a single DL4 DS Link converter.
Compatibility
Housing Compatibility
- Non-Ikelite housings for Nikon DSLR cameras featuring a TTL flash hotshoe and Nikonos N5 bulkhead; If you are unsure whether your housing meets these requirements, please contact the manufacturer.
Camera Compatibility
- Fujifilm X-T3
Strobe Compatibility
- DS50 strobes: above serial number 75510 with update
- DS51 strobes: above serial number 78700
- DS125 strobes: above serial number 7928
- DS160, DS161 strobes: all
- DS200 strobes: above serial number 7163
- Not compatible with non-digital Ikelite strobes including but not limited to SS50, SS200, SS400, Ai, 100/A
- Not compatible with SEA&SEA, INON, or other non-Ikelite strobes
Sync Cord Compatibility
- Ikelite Housing to Ikelite Strobes # 45151
- Ikelite Housing to Two Ikelite Strobes # 45152
- Ikelite Housing to Ikelite Strobe # 4103.51 (out of production)
- Ikelite Housing to Two Ikelite Strobes # 4103.52 (out of production)
What's Included
DL4 DS Link TTL converter
Plug o-ring # 0118 (installed)
Connector protector for plug # 0301.14 (installed)
Waterproof Bulkhead Cap # 9104.7 (installed)
Silicone lubricant 1cc tube
Ikelite DLM 6 inch Dome Port with Zoom
$ 349.95
Ikelite DLM 6 inch Dome Port with Zoom - 551615
An extended dome port providing zoom function for most mirrorless interchangeable zoom lenses when used with the appropriate zoom sleeve. See Mirrorless Port System section to view lens compatibility.
Ikelite DLM 6 inch Dome Port with Zoom Extended .375 Inch
$ 424.95
Ikelite DLM 6 inch Dome Port with Zoom Extended .375 Inch
Ikelite SKU: 5516.16 | Helix SKU: 551616
Overview
An extended dome port providing zoom function for most mirrorless interchangeable zoom lenses when used with the appropriate zoom sleeve.
An optical-grade acrylic 6-inch diameter dome allows you to fully take advantage of the angle of view of your lens. Acrylic produces virtually identical image quality to glass yet is much lighter weight and easier to pack.
Our unique zoom sleeves are simple and affordable. Zoom sleeves are particular to the lens for proper operation. Refer to the appropriate port for your housing to determine compatibility.
A dome shade is in process for this item. It is expected to become available in late 2017.
Specifications
- Delrin body with acrylic dome
What's Included
- Dome Port
- Neoprene cover # 0200.1
- Silicone lubricant # 0184.2
Ikelite DLM 6 inch Dome Port with Zoom Extended 1.0 Inch
$ 449.95
Ikelite DLM 6 inch Dome Port with Zoom Extended 1.0 Inch
Ikelite SKU: 5516.17 | Helix SKU: 551617
Overview
An extended dome port providing zoom function for most mirrorless interchangeable zoom lenses when used with the appropriate zoom sleeve.
An optical-grade acrylic 6-inch diameter dome allows you to fully take advantage of the angle of view of your lens. Acrylic produces virtually identical image quality to glass yet is much lighter weight and easier to pack.
Our unique zoom sleeves are simple and affordable. Zoom sleeves are particular to the lens for proper operation. Refer to the appropriate port for your housing to determine compatibility.
A dome shade is in process for this item. It is expected to become available in late 2017.
Specifications
- Delrin body with acrylic dome
What's Included
- Dome Port
- Neoprene cover # 0200.1
- Silicone lubricant # 0184.2
Ikelite DLM Extended 6 inch Dome Port
$ 374.95
Ikelite DLM Extended 6 inch Dome Port - IK551612
Ikelite DLM Extended Flat Port
$ 249.95
Ikelite DLM Extended Flat Port - IK551650
Ikelite DLM Mirrorless 1.2-inch Lens Extension
$ 174.95
Ikelite DLM Mirrorless 1.2-inch Lens Extension - IK551665
Ikelite DLM Mirrorless 2-inch Lens Extension
$ 219.95
Ikelite DLM Mirrorless 2-inch Lens Extension - IK551669
