ProMaster SM1S Speedlight Master Transmitter for Sony M.I.S.
$ 69.95 - Sold Out
ProMaster SM1S Speedlight Master Transmitter for Sony M.I.S.
ProMaster SKU: 4959 | Helix SKU: PR49591
Overview
The ProMaster SM1S Wireless Speedlight Master Transmitter works over a long range (325' 100m) to control a ProMaster 200ST-R Speedlight as a slave flash. It can fire the slave(s) in up to 3 groups with up to 15 slaves per group using features such as TTL exposure control, slow sync. HSS high-speed sync., flash bracketing, exposure compensation, and more.
The SM1S utilizes an internal Li-Ion, rechargeable battery as its power source. The unit is incredibly efficient and the battery lasts a very long time. Plus, the SM1S can operate while connected to a charger, for times when you need even more run time. OK, wait a minute, let's explore this a bit more. Let's say your SM1S has sat dormant for 6 months and then you decide to use it extensively for a couple of days. Near the end of day-two you suddenly notice its battery is getting low and realize you had never thought about charging it. Perhaps you can take a 2-hour break and plug it into a wall outlet, since that's all it takes to bring the battery back up to 100%. But, maybe that's not a good option. It's cool. You can use the SM1S while it's plugged-in for charging. Maybe having a cord running to a wall outlet is not convenient. No worries! Grab a common power bank (like the one you use for your phone) and simply connect that to the SM1S. You'll be golden! The USB micro-b to USB-A charging cord is included with the SM1S and is s common cord that can be bought at any corner store (in case you forget it at home). In fact, you may already have one or a dozen laying around from other devices.
Specifications
- 2.4GHz radio operating frequency
- Wireless range: 325' / 100 m
- 15 Channels + auto
- 3 Groups A/B/C with ratio control (up to 15 units in a group)
- Manual output power range: 1 - 1/128th
- Net Weight: 3.6 oz / 102 g
- Dimensions: 3 5/16" x 2 9/16" x 1 11/16" (84.1 mm x 65.1 mm x 42.9 mm)
- Power Source: Integrated, rechargeable Li-Ion battery (3.7 V 1,000 mAh)
- Charging input: DC 5V 0.5 A
- USB port: Micro B
- ProMaster 5398 USB firmware downloading cable for computer connection
Item Includes
ProMaster Soft Cleaning Cloth in Waterproof Tube
$ 9.99 - Sold Out
ProMaster Soft Cleaning Cloth in Waterproof Tube
ProMaster SKU: 9286 | Helix SKU: PR9286
Overview
Clean your lenses, LCD screens, glasses and other delicate surfaces with this ultra soft cleaning cloth. The ProMaster SoftClean is made from 100% micro synthetic, chemical free fibers. The SoftClean will clean up even the tiniest dust particles, finger prints, and grease spots due to the unique triangular structure of the microfiber filaments used to make the cloth. The cloth is packed in a handy waterproof case that can be clipped to your camera bag, purse, backpack or elsewhere so it is always ready when you need it. In a pinch and need a grey source to get just the correct exposure or color balance? The SoftClean's neutral gray color is just the ticket.
ProMaster Soft Memory Card Case - Black
$ 9.95
ProMaster Soft Memory Card Case - Black - PR9798
The ProMaster soft anti-static memory card case provides handy storage for your spare memory cards.
- Holds up to 5 memory cards (maximum of 2 CF cards)
- Anti-static fabric reduces risk of lost images and data
- Handy clip attaches to your camera bag, photo vest, jacket or other attachment points
- Black
ProMaster Soft Memory Card Case - Red
$ 9.95
ProMaster Soft Memory Card Case - Red - PR9805
The ProMaster soft anti-static memory card case provides handy storage for your spare memory cards.
- Holds up to 5 memory cards (maximum of 2 CF cards)
- Anti-static fabric reduces risk of lost images and data
- Handy clip attaches to your camera bag, photo vest, jacket or other attachment points
- Red
ProMaster Softbox - 24''x24''
$ 69.95
ProMaster Soft Box - 24'' x 24''
ProMaster SKU: 8152 | Helix SKU: PR8152
Overview
A Soft Box is a must have studio accessory that provides a natural soft light reducing harsh shadows and hot spots. Using a soft box helps to create more flattering images of people and objects. ProMaster Soft Boxes are available in a variety of sizes. Setup requires the use of a speed ring to fit your flash. Speed rings are sold separately.
ProMaster Softbox - 32''x48''
$ 119.95
ProMaster Soft Box - 32''x48''
ProMaster SKU: 8173 | Helix SKU: PR8173
Overview
A ProMaster Soft Box is a must have studio accessory that provides a natural soft light reducing harsh shadows and hot spots. Using a soft box helps to create more flattering images of people and objects. ProMaster Soft Boxes are available in a variety of sizes. Setup requires the use of a speed ring to fit your flash. Speed rings are sold separately.
ProMaster Softbox - 36''x36''
$ 99.95
ProMaster Soft Box - 36''x36''
ProMaster SKU: 8166 | Helix SKU: PR8166
Overview
A ProMaster Soft Box is a must have studio accessory that provides a natural soft light reducing harsh shadows and hot spots. Using a soft box helps to create more flattering images of people and objects. ProMaster Soft Boxes are available in a variety of sizes. Setup requires the use of a speed ring to fit your flash. Speed rings are sold separately.
ProMaster Softbox - 48" Octagonal
$ 139.95
ProMaster Softbox - Octagonal - 48"x48"
ProMaster SKU: 8187 | Helix SKU: PR8187
Overview
A ProMaster Softbox is a must have studio accessory that provides a natural soft light reducing harsh shadows and hot spots. Using a soft box helps to create more flattering images of people and objects.
ProMaster Soft Boxes are available in a variety of sizes.
Setup requires the use of a speed ring to fit your flash. Speed rings are sold separately.
ProMaster Softbox Speedring - Bowens
$ 39.95
ProMaster SOFTBOX SPEED RING F/ProMaster, Bowens, Asis & Phottix.
ProMaster Softbox Speedring - Elinchrom
$ 29.95
ProMaster Softbox Speedring - Elinchrom
ProMaster SKU: 7928 | Helix SKU: PR7928
Overview
ProMaster Softbox Speed Rings are the complete 2-piece set required to mount most brands of softboxes to your studio flash. The inner ring which attaches to your flash may also be used to mount other speed ring compatible accessories. Fits Elinchrom compatible flash heads.
Specifications
ProMaster Softbox Speedring - Photogenic
$ 24.95
ProMaster SOFTBOX SPEED RING F/PHOTOGENC
ProMaster Softbox Speedring - Profoto
$ 49.95
ProMaster SOFTBOX SPEED RING F/PROFOTO
ProMaster Softbox Speedring - Speedotron
$ 24.95
ProMaster SOFTBOX SPEED RING F/SPEEDOTRN
ProMaster Softbox Speedring - White Lightning
$ 24.95
ProMaster SOFTBOX SPEED RING F/WH LIGHT
ProMaster Softbox Starter Kit - 36'' Octagonal
$ 129.95
ProMaster Studio Soft Box Starter Kit - 36'' Octagonal
ProMaster Solid Backdrop - 10'x12' - Black
$ 89.95
ProMaster Solid Backdrop - 10'x12' - Black - PR1856
ProMaster solid color backdrops are made from a polyester/cotton blend, which makes these backdrops more opaque and less subject to wrinkles. They are perfect for any studio setup. The backdrops include a handy storage bag made from the same backdrop material for quick identification.
ProMaster Solid Backdrop - 10'x12' - Chroma Key Green
$ 89.95
ProMaster Solid Backdrop - 10'x12' - Chroma Key Green - PR1884
ProMaster solid color backdrops are made from a polyester/cotton blend, which makes these backdrops more opaque and less subject to wrinkles. They are perfect for any studio setup. The backdrops include a handy storage bag made from the same backdrop material for quick identification.
ProMaster Solid Backdrop - 10'x12' - Grey
$ 89.95
ProMaster Solid Backdrop - 10'x12' - Grey - PR1870
ProMaster solid color backdrops are made from a polyester/cotton blend, which makes these backdrops more opaque and less subject to wrinkles. They are perfect for any studio setup. The backdrops include a handy storage bag made from the same backdrop material for quick identification.
ProMaster Solid Backdrop - 10'x12' - White
$ 89.95
ProMaster Solid Backdrop - 10'x12' - White - PR1863
ProMaster solid color backdrops are made from a polyester/cotton blend, which makes these backdrops more opaque and less subject to wrinkles. They are perfect for any studio setup. The backdrops include a handy storage bag made from the same backdrop material for quick identification.
ProMaster Solid Backdrop - 10'x20' - Black
$ 119.95
ProMaster Solid Backdrop - 10'x20' - Black - PR1891
ProMaster solid color backdrops are made from a polyester/cotton blend, which makes these backdrops more opaque and less subject to wrinkles. They are perfect for any studio setup. The backdrops include a handy storage bag made from the same backdrop material for quick identification.
ProMaster Solid Backdrop - 10'x20' - Chroma Key Blue
$ 119.95 - Sold Out
ProMaster Solid Backdrop - 10'x20' - Chroma Key Blue - PR1919
ProMaster solid color backdrops are made from a polyester/cotton blend, which makes these backdrops more opaque and less subject to wrinkles. They are perfect for any studio setup. The backdrops include a handy storage bag made from the same backdrop material for quick identification.
ProMaster Solid Backdrop - 10'x20' - Chroma Key Green
$ 119.95
ProMaster Solid Backdrop - 10'x20' - Chroma Key Green - PR1912
ProMaster solid color backdrops are made from a polyester/cotton blend, which makes these backdrops more opaque and less subject to wrinkles. They are perfect for any studio setup. The backdrops include a handy storage bag made from the same backdrop material for quick identification.
ProMaster Solid Backdrop - 10'x20' - Grey
$ 119.95
ProMaster Solid Backdrop - 10'x20' - Grey - PR1905
ProMaster solid color backdrops are made from a polyester/cotton blend, which makes these backdrops more opaque and less subject to wrinkles. They are perfect for any studio setup. The backdrops include a handy storage bag made from the same backdrop material for quick identification.
ProMaster Solid Backdrop - 10'x20' - White
$ 119.95
ProMaster Solid Backdrop - 10'x20' - White - PR1898
ProMaster solid color backdrops are made from a polyester/cotton blend, which makes these backdrops more opaque and less subject to wrinkles. They are perfect for any studio setup. The backdrops include a handy storage bag made from the same backdrop material for quick identification.
ProMaster Sony NP-BG1 Li-ion battery
$ 29.95 - Sold Out
ProMaster Sony NP-BG1 Li-ion battery
ProMaster SKU: 5628 | Helix SKU: PR5628
Overview
ProMaster batteries are a high quality, long lasting power source for your digital camera or camcorder. ProMaster replacement batteries are manufactured to meet or exceed the equipment manufacturer's specifications.
+ 3.6V 1000MAH Lithium Ion
+ Replaces Sony InfoLithium NP-BG1
Specifications
- Voltage: 3.6 V
- Capacity: 1000 mAh
- Dimensions: 42 mm x 36 mm x 9 mm
- Weight: 24 g
Item Includes
ProMaster Sony NP-BN1 Li-ion battery
$ 79.95
ProMaster Sony NP-BN1 Li-ion battery
ProMaster Sony NP-BX1 Li-ion battery
$ 21.95
ProMaster Sony NP-BX1 Li-ion battery
ProMaster Sony NP-FH50 Li-ion battery
$ 99.95
ProMaster Sony NP-FH50 Li-ion battery
ProMaster Sony NP-FM500H Li-ion battery
$ 44.95
ProMaster Sony NP-FM500H Li-ion battery
ProMaster Sony NP-FM55H Li-ion battery
$ 99.95
ProMaster Sony NP-FM55H Li-ion battery
ProMaster Sony NP-FR1 Li-ion battery
$ 79.95
ProMaster Sony NP-FR1 Li-ion battery
ProMaster Sony NP-FW50 Li-ion battery
$ 34.95
ProMaster Sony NP-FW50 Li-ion battery
ProMaster Specialist Series SPH36P Ball Head
$ 109.95
ProMaster Specialist Series SPH36P Ball Head
ProMaster SKU: 8083 | Helix SKU: PR8083
Overview
The SP36P is a highly technical ball head. It has both upper and lower panning controls with degree marks. The main tension control is generously large and easy to use. Integrated into the tension control is a memory lock dial for setting a repeatable tension stop. Both a high-rise and low-profile memory lock dial are included so you have the choice of which to use. The ProMaster dovetail quick release system is easy to use and is compatible with a variety of arca-swiss type quick release products.
+ Machined (not cast) from high grade aluminum. The quality of these heads is evident.
+ QR plates are arca-swiss compatible with an incorporated safety catch mechanism.
+ Knobs are a rich red color so you can easily identify touch points on the head.
+ SP heads can pan from the base or from the top platform and have engraved degree-markings. Use the lower panning base for the initial framing of a shot followed by the upper pan to rotate the camera without affecting its other positioning.
+ A large tension control knob is easy to use, even with gloves.
+ Inside of the tension control knob is a secondary knob called a Memory Lock. It sets a repeatable tension when moving the camera on the ball head.
+ Two memory lock knobs are included with the ball head. Choose the protruding Memory Lock knob for ease of adjustment or switch it for the low profile Memory Lock knob which avoids any accidental changes.
Specifications
- Height: 3 7/8" / 98 mm
- Weight: 15 3/8 oz / 435 g
- Ball Diameter: 1 13/32" / 36 mm
- Base Diameter: 2 1/8" / 54 mm
- Maximum Load: 22 lbs / 10 kg
- Quick Release Plate: #8090
Item Includes
- 1 ProMaster SPH36P ball head
- 1 8090 Quick Release Plate
- Both 1 high-rise and 1 low-profile memory lock dial
ProMaster Specialist Series SPH45P Ball Head
$ 139.95
ProMaster Specialist Series SPH45P Ball Head
ProMaster SKU: 8097 | Helix SKU: PR8097
Overview
The SP45P is a highly technical ball head. It has both upper and lower panning controls with degree marks. The main tension control is generously large and easy to use. Integrated into the tension control is a memory lock dial for setting a repeatable tension stop. Both a high-rise and low-profile memory lock dial are included so you have the choice of which to use. All controls on the SP45P are colored red for easy identification. The ProMaster dovetail quick release system is easy to use and is compatible with a variety of arca-swiss type quick release products.
+ Machined (not cast) from high grade aluminum. The quality of these heads is evident.
+ QR plates are arca-swiss compatible with an incorporated safety catch mechanism.
+ Knobs are a rich red color so you can easily identify touch points on the head.
+ SP heads can pan from the base or from the top platform and have engraved degree-markings. Use the lower panning base for the initial framing of a shot followed by the upper pan to rotate the camera without affecting its other positioning.
+ A large tension control knob is easy to use, even with gloves.
+ Inside of the tension control knob is a secondary knob called a Memory Lock. It sets a repeatable tension when moving the camera on the ball head.
+ Two memory lock knobs are included with the ball head. Choose the protruding Memory Lock knob for ease of adjustment or switch it for the low profile Memory Lock knob which avoids any accidental changes.
Specifications
- Height: 4 1/8" / 105 mm
- Weight: 1 lb 4 1/4 oz / 577 g
- Ball Diameter: 1 3/4" / 45 mm
- Base Diameter: 2 7/16" / 62 mm
- Maximum Load: 26 lbs 8 oz / 12 kg
- Quick Release Plate: #8104
Item Includes
- 1 ProMaster SP45P ball head
- 1 8104 Quick Release Plate
- Both 1 high-rise and 1 low-profile memory lock dial
ProMaster Specialist SP425 Tripod with Ball Head
$ 229.95
ProMaster Specialist SP425 Tripod with Ball Head
ProMaster SKU: 8118 | Helix SKU: PR8118
Overview
Engineered to exacting standards for the discerning photographer, the ProMaster SP425 Specialist tripod will anchor your camera in difficult shooting situations.
Compact when closed but generously tall when opened it's a pleasure to use at eye level. Red colored touch points are easy to see and operate even in low light. Innovative PROlocks allow for quick opening and powerful closing of leg sections. Threaded connection ports work with a variety of accessories and ProMaster's dovetail quick release system is a fast and secure way of attaching your camera (arca-swiss compatible).
With its advanced features the Specialist SP425 gives you the flexibility to frame unique shots and realize your vision.
Ball Heads:
• Machined (not cast) from high grade aluminum. The quality of these heads is clearly evident.
• QR plates are arca-swiss compatible with an incorporated safety catch mechanism.
• Knobs are a rich red color for a professional look and so you can easily identify touch points on the head.
• SP heads can pan from the base or from the top platform and have engraved degree-markings. Use the lower panning base for the initial framing of a shot followed by the upper pan to rotate the camera without affecting its other positioning.
• A large tension control knob is easy to use, even with gloves.
• Inside of the tension control knob is a secondary knob called a Memory Lock. It sets a repeatable tension when moving the camera on the ball head.
• Two memory lock knobs are included with the ball head. Choose the protruding Memory Lock knob for ease of adjustment or switch it for the low profile Memory Lock knob which avoids any accidental changes.
Tripod Legs:
• All leg locks are PROlocks which are powerful yet easy to open, even while wearing gloves.
• Tripod feet are made of heavy duty rubber and twist to expose retractable spikes.
• Columns are easy to adjust, reversible, and can be separated into two parts for ultra low angle photography.
• Leg angle adjustments are made with an all-new slide switch.
• The yolk of each tripod is extremely strong to avoid unwanted movement.
• A bubble level is incorporated along with two 3/8" threaded accessory ports. ProMaster flex arms make a perfect companion by connecting to these ports providing an extra set of ‘hands’ for flashes, LED lights, etc…
• All touch points on the tripod are also colored red for easy identification.
• Specialist tripods are extra tall, which is a special benefit when setting up on uneven ground since a tripod is normally restricted by the lowest point it touches.
Specifications
KIT SPECIFICATIONS
- Maximum Working Height: 68 3/4" / 174.6 cm
- Maximum Height with column down: 55 5/8" / 141.3 cm
- Minimum Working Height: 7" / 17.8 cm
- Folded Length: 23 1/8" / 58.7 cm
- Maximum Load: 22 lbs / 10 kg
- Weight: 4 lbs 9 3/4 oz / 2.09 kg
BALL HEAD SPECIFICATIONS
- Height: 3 7/8" / 9.8 cm
- Weight: 15 3/8 oz / .44 kg
- Uses Quick Release Plate #8090
TRIPOD LEG SPECIFICATIONS
- Maximum Working Height: 64 7/8" / 164.8 cm
- Maximum Height with column down: 51 3/4" / 131.5 cm
- Minimum Working Height: 3 1/8" / 8 cm
- Folded Length: 19 1/4" / 48.9 cm
- Weight: 3 lbs 10 3/8 oz / 1.65 kg
ProMaster Specialist SP425C Carbon Fiber Tripod with Ball Head
$ 329.95
ProMaster Specialist SP425CK Carbon Fiber Tripod with Ball Head
ProMaster SKU: 8840 | Helix SKU: PR8840
Overview
Engineered to exacting standards for the discerning photographer, the ProMaster SP425C Specialist tripod will anchor your camera in difficult shooting situations.
Compact when closed but generously tall when opened it's a pleasure to use at eye level. Red colored touch points are easy to see and operate even in low light. Innovative PROlocks allow for quick opening and powerful closing of leg sections. Threaded connection ports work with a variety of accessories and ProMaster's dovetail quick release system is a fast and secure way of attaching your camera (arca-swiss compatible).
With its advanced features the Specialist SP425C gives you the flexibility to frame unique shots and realize your vision.
Ball Heads:
+ Machined (not cast) from high grade aluminum. The quality of these heads is clearly evident.
+ QR plates are arca-swiss compatible with an incorporated safety catch mechanism.
+ Knobs are a rich red color for a professional look and so you can easily identify touch points on the head.
+ SP heads can pan from the base or from the top platform and have engraved degree-markings. Use the lower panning base for the initial framing of a shot followed by the upper pan to rotate the camera without affecting its other positioning.
+ A large tension control knob is easy to use, even with gloves.
+ Inside of the tension control knob is a secondary knob called a Memory Lock. It sets a repeatable tension when moving the camera on the ball head.
+ Two memory lock knobs are included with the ball head. Choose the protruding Memory Lock knob for ease of adjustment or switch it for the low profile Memory Lock knob which avoids any accidental changes.
Tripod Legs:
+ All leg locks are PROlocks which are powerful yet easy to open, even while wearing gloves.
+ Tripod feet are made of heavy duty rubber and twist to expose retractable spikes.
+ Columns are easy to adjust, reversible, and can be separated into two parts for ultra low angle photography.
+ Leg angle adjustments are made with an all-new slide switch.
+ The yolk of each tripod is extremely strong to avoid unwanted movement.
+ A bubble level is incorporated along with two 3/8" threaded accessory ports. ProMaster flex arms make a perfect companion by connecting to these ports providing an extra set of ‘hands’ for flashes, LED lights, etc…
+ All touch points on the tripod are also colored red for easy identification.
+ Specialist tripods are extra tall, which is a special benefit when setting up on uneven ground since a tripod is normally restricted by the lowest point it touches.
Specifications
KIT SPECIFICATIONS
- Maximum Working Height: 68 3/4" / 174.6 cm
- Maximum Height with column down: 55 5/8" / 141.3 cm
- Minimum Working Height: 7" / 17.8 cm (legs flat on ground)
- Minimum Working Height:10 7/8" / 27.6 cm (legs in lowest locked position)
- Folded Length: 23 1/8" / 58.7 cm
- Maximum Load: 22 lbs / 10 kg
- Weight: 3 lbs 15 oz / 1.79 kg
BALL HEAD SPECIFICATIONS
- Height: 3 7/8" / 9.8 cm
- Weight: 15 3/8 oz / .44 kg
- Uses Quick Release Plate #8090
TRIPOD LEG SPECIFICATIONS
- Maximum Working Height: 64 7/8" / 164.8 cm
- Maximum Height with column down: 51 3/4" / 131.5 cm
- Minimum Working Height: 3 1/8" / 8 cm
- Folded Length: 19 1/4" / 48.9 cm
- Weight: 2 lbs 15 5/8 oz / 1.35 kg
Item Includes
- SP425C Tripod Legs
- SPH36P Ball Head
- 8090 Quick Release Plate
- Tool kit with storage pouch
- 2 thread adapters (1/4"-20 to 3/8")
- Standard & low profile memory lock dials for ball head
ProMaster Specialist SP528 Tripod with Ball Head
$ 269.95
ProMaster Specialist SP528 Tripod with Ball Head
ProMaster SKU: 8125 | Helix SKU: PR8125
Overview
Engineered to exacting standards for the discerning photographer, the ProMaster SP528K Specialist tripod will anchor your camera in difficult shooting situations.
This ProMaster professional tripod is compact when closed but generously tall when opened it's a pleasure to use at eye level. Red colored touch points are easy to see and operate even in low light. Innovative PROlocks allow for quick opening and powerful closing of leg sections. Threaded connection ports work with a variety of accessories and ProMaster's dovetail quick release system is a fast and secure way of attaching your camera (arca-swiss compatible). With its advanced features the Specialist SP528 gives you the flexibility to frame unique shots and realize your vision.
Ball Heads:
• Machined (not cast) from high grade aluminum. The quality of these heads is clearly evident.
• QR plates are arca-swiss compatible with an incorporated safety catch mechanism.
• Knobs are a rich red color for a professional look and so you can easily identify touch points on the head.
• SP heads can pan from the base or from the top platform and have engraved degree-markings. Use the lower panning base for the initial framing of a shot followed by the upper pan to rotate the camera without affecting its other positioning.
• A large tension control knob is easy to use, even with gloves.
• Inside of the tension control knob is a secondary knob called a Memory Lock. It sets a repeatable tension when moving the camera on the ball head.
• Two memory lock knobs are included with the ball head. Choose the protruding Memory Lock knob for ease of adjustment or switch it for the low profile Memory Lock knob which avoids any accidental changes.
Tripod Legs:
• All leg locks are PROlocks which are powerful yet easy to open, even while wearing gloves.
• The ProMaster's professional tripod feet are made of heavy duty rubber and twist to expose retractable spikes.
• Columns are easy to adjust, reversible, and can be separated into two parts for ultra low angle photography.
• Leg angle adjustments are made with an all-new slide switch.
• The yolk of each tripod is extremely strong to avoid unwanted movement.
• A bubble level is incorporated along with two 3/8" threaded accessory ports. ProMaster flex arms make a perfect companion by connecting to these ports providing an extra set of ‘hands’ for flashes, LED lights, etc…
• All touch points on the ProMaster professional tripod are also colored red for easy identification.
• Specialist tripods are extra tall, which is a special benefit when setting up on uneven ground since a tripod is normally restricted by the lowest point it touches.
Specifications
KIT SPECIFICATIONS
- Maximum Working Height: 80 5/8" / 204.8 cm
- Maximum Working Height with column down: 67 1/8" / 170.5 cm
- Minimum Working Height: 7 1/4" / 18.4 cm
- Folded Length: 23 3/4" / 60.3 cm
- Maximum Load: 24 lbs 4 oz / 11 kg
- Weight: 5 lbs 11 5/8 oz / 2.6 kg
BALL HEAD SPECIFICATIONS
- Height 4 1/8" / 10.5 cm
- Weight: 1 lb 4 1/4 oz / .57 kg
- Uses Quick Release Plate #8104
TRIPOD LEG SPECIFICATION
- Maximum Working Height: 76 1/2" / 194.3 cm
- Maximum Height with column down: 63" / 160 cm
- Minimum Working Height: 3 1/8" / 8 cm
- Folded Length 19 5/8" / 49.8 cm
- Weight: 4 lbs 7 3/8 oz / 2.03 kg
ProMaster Specialist SP528C Carbon Fiber Tripod with Ball Head
$ 369.95
ProMaster Specialist SP528C Carbon Fiber Tripod with Ball Head
ProMaster SKU: 8132 | Helix SKU: PR8132
Overview
Engineered to exacting standards for the discerning photographer, the ProMaster SP528C Specialist Carbon Fiber tripod will anchor your camera in difficult shooting situations. Compact when closed but generously tall when opened it's a pleasure to use at eye level.
Red colored touch points are easy to see and operate even in low light. Innovative PROlocks allow for quick opening and powerful closing of leg sections. Threaded connection ports work with a variety of accessories and ProMaster's dovetail quick release system is a fast and secure way of attaching your camera (arca-swiss compatible). With its advanced features the Specialist SP528C gives you the flexibility to frame unique shots and realize your vision.
Ball Heads:
+ Machined (not cast) from high grade aluminum. The quality of these heads is clearly evident.
+ QR plates are arca-swiss compatible with an incorporated safety catch mechanism.
+ Knobs are a rich red color for a professional look and so you can easily identify touch points on the head.
+ SP heads can pan from the base or from the top platform and have engraved degree-markings. Use the lower panning base for the initial framing of a shot followed by the upper pan to rotate the camera without affecting its other positioning.
+ A large tension control knob is easy to use, even with gloves.
+ Inside of the tension control knob is a secondary knob called a Memory Lock. It sets a repeatable tension when moving the camera on the ball head.
+ Two memory lock knobs are included with the ball head. Choose the protruding Memory Lock knob for ease of adjustment or switch it for the low profile Memory Lock knob which avoids any accidental changes.
Carbon Fiber Legs:
+ Light weight yet incredibly strong
+ All leg locks are PROlocks which are powerful yet easy to open, even while wearing gloves.
+ Tripod feet are made of heavy duty rubber and twist to expose retractable spikes.
+ Columns are easy to adjust, reversible, and can be separated into two parts for ultra low angle photography.
+ Leg angle adjustments are made with an all-new slide switch.
+ The yolk of each tripod is extremely strong to avoid unwanted movement.
+ A bubble level is incorporated along with two 3/8" threaded accessory ports. ProMaster flex arms make a perfect companion by connecting to these ports providing an extra set of ‘hands’ for flashes, LED lights, etc…
+ All touch points on the tripod are also colored red for easy identification.
+ Specialist tripods are extra tall, which is a special benefit when setting up on uneven ground since a tripod is normally restricted by the lowest point it touches.
Specifications
KIT SPECIFICATIONS
- Maximum Working Height: 80 5/8" / 204.8 cm
- Maximum Height with column down: 67 1/8" / 170.5 cm
- Minimum Working Height: 7 1/4" / 18.4 cm (legs flat on ground)
- Minimum Working Height:11 1/4" / 28.6 cm (legs in lowest locked position)
- Folded Length: 23 3/4" / 60.3 cm
- Maximum Load: 24 lbs 4 oz / 11 kg
- Weight: 4 lbs 14 5/8 oz / 2.22 kg
BALL HEAD SPECIFICATIONS
- Height: 4 1/8" / 10.5 cm
- Weight: 1 lb 4 1/4 oz / .57 kg
- Uses Quick Release Plate #8104
TRIPOD LEG SPECIFICATION
- Maximum Working Height: 76 1/2" / 194.3 cm
- Maximum Height with column down: 63" / 160 cm
- Minimum Working Height: 3 1/8" / 8 cm (legs flat on ground)
- Minimum Working Height: 7 1/8" / 18.1 cm (legs in lowest locked position)
- Folded Length: 19 5/8" / 49.8 cm
- Weight: 3 lbs 10 3/8 oz / 1.65 kg
Item Includes
- SP528C Carbon Fiber Tripod Legs
- SPH45P Ball Head
- 8104 Quick Release Plate
- Tool kit with storage pouch
- 2 thread adapters (1/4"-20 to 3/8")
- Standard & low profile memory lock dials for ball head
ProMaster Specialist SP532 Tripod with Ball Head
$ 299.95
ProMaster Specialist SP532 Tripod with Ball Head
ProMaster SKU: 8139 | Helix SKU: PR8139
Overview
Engineered to exacting standards for the discerning photographer, the ProMaster SP532 Specialist professional photography tripod will anchor your camera in difficult shooting situations.
Compact when closed but generously tall when opened it's a pleasure to use at eye level. Red colored touch points are easy to see and operate even in low light. Innovative PROlocks allow for quick opening and powerful closing of leg sections. Threaded connection ports work with a variety of accessories and ProMaster's dovetail quick release system is a fast and secure way of attaching your camera to this professional photography tripod (arca-swiss compatible). With its advanced features the Specialist SP532 gives you the flexibility to frame unique shots and realize your vision.
Ball Heads:
• Machined (not cast) from high grade aluminum. The quality of these heads is clearly evident.
• QR plates are arca-swiss compatible with an incorporated safety catch mechanism.
• Knobs are a rich red color for a professional look and so you can easily identify touch points on the head.
• SP heads can pan from the base or from the top platform and have engraved degree-markings. Use the lower panning base on this professional photography tripod for the initial framing of a shot followed by the upper pan to rotate the camera without affecting its other positioning.
• A large tension control knob is easy to use, even with gloves.
• Inside of the tension control knob is a secondary knob called a Memory Lock. It sets a repeatable tension when moving the camera on the ball head.
• Two memory lock knobs are included with the ball head. Choose the protruding Memory Lock knob for ease of adjustment or switch it for the low profile Memory Lock knob which avoids any accidental changes.
Tripod Legs:
• All leg locks are PROlocks which are powerful yet easy to open, even while wearing gloves.
• Tripod feet are made of heavy duty rubber and twist to expose retractable spikes.
• Columns are easy to adjust, reversible, and can be separated into two parts for ultra low angle photography.
• Leg angle adjustments are made with an all-new slide switch.
• The yolk of each professional photography tripod is extremely strong to avoid unwanted movement.
• A bubble level is incorporated along with two 3/8" threaded accessory ports. ProMaster flex arms make a perfect companion by connecting to these ports providing an extra set of ‘hands’ for flashes, LED lights, etc…
• All touch points on the tripod are also colored red for easy identification.
• Specialist professional photography tripods are extra tall, which is a special benefit when setting up on uneven ground since a tripod is normally restricted by the lowest point it touches.
Specifications
KIT SPECIFICATIONS
- Maximum Working Height: 84 1/2" / 214.6 cm
- Maximum Height with column down: 70 1/4" / 178.4 cm
- Minimum Working Height: 7 1/4" / 18.4 cm (legs flat on ground)
- Minimum Working Height:11 1/4" / 28.6 cm (legs in lowest locked position)
- Folded Length: 24 1/2" / 62.2 cm
- Maximum Load: 26 lbs 8 oz / 12 kg
- Weight: 6 lbs 8 5/8 oz / 2.97 kg
BALL HEAD SPECIFICATIONS
- Height: 4 1/8" / 10.5 cm
- Weight: 1 lb 4 1/4 oz / .57 kg
- Uses Quick Release Plate #8104
TRIPOD LEG SPECIFICATION
- Maximum Working Height: 80 3/8" / 204.1 cm
- Maximum Height with column down: 66 1/8" / 167.9 cm
- Minimum Working Height: 3 1/8" / 8 cm (legs flat on ground)
- Minimum Working Height: 7 1/8" / 18.1 cm (legs in lowest locked position)
- Folded Length: 20 3/8" / 51.7 cm
- Weight: 5 lbs 4 3/8 oz / 2.40 kg
ProMaster Specialist SP532C Carbon Fiber Tripod with Ball Head
$ 399.95
ProMaster Specialist SP532C Carbon Fiber Tripod with Ball Head
ProMaster SKU: 8146 | Helix SKU: PR8146
Overview
Engineered to exacting standards for the discerning photographer, the ProMaster SP532C Specialist Carbon Fiber tripod will anchor your camera in difficult shooting situations. Compact when closed but generously tall when opened it's a pleasure to use at eye level. Red colored touch points are easy to see and operate even in low light. Innovative PROlocks allow for quick opening and powerful closing of leg sections. Threaded connection ports work with a variety of accessories and ProMaster's dovetail quick release system is a fast and secure way of attaching your camera (arca-swiss compatible). With its advanced features the Specialist SP532C gives you the flexibility to frame unique shots and realize your vision.
Ball Heads:
+ Machined (not cast) from high grade aluminum. The quality of these heads is clearly evident.
+ QR plates are arca-swiss compatible with an incorporated safety catch mechanism.
+ Knobs are a rich red color for a professional look and so you can easily identify touch points on the head.
+ SP heads can pan from the base or from the top platform and have engraved degree-markings. Use the lower panning base for the initial framing of a shot followed by the upper pan to rotate the camera without affecting its other positioning.
+ A large tension control knob is easy to use, even with gloves.
+ Inside of the tension control knob is a secondary knob called a Memory Lock. It sets a repeatable tension when moving the camera on the ball head.
+ Two memory lock knobs are included with the ball head. Choose the protruding Memory Lock knob for ease of adjustment or switch it for the low profile Memory Lock knob which avoids any accidental changes.
Carbon Fiber Legs:
+ Light weight yet incredibly strong
+ All leg locks are PROlocks which are powerful yet easy to open, even while wearing gloves.
+ Tripod feet are made of heavy duty rubber and twist to expose retractable spikes.
+ Columns are easy to adjust, reversible, and can be separated into two parts for ultra low angle photography.
+ Leg angle adjustments are made with an all-new slide switch.
+ The yolk of each tripod is extremely strong to avoid unwanted movement.
+ A bubble level is incorporated along with two 3/8" threaded accessory ports. ProMaster flex arms make a perfect companion by connecting to these ports providing an extra set of ‘hands’ for flashes, LED lights, etc…
+ All touch points on the tripod are also colored red for easy identification.
+ Specialist tripods are extra tall, which is a special benefit when setting up on uneven ground since a tripod is normally restricted by the lowest point it touches.
Specifications
KIT SPECIFICATIONS
- Maximum Working Height: 84 1/2" / 214.6 cm
- Maximum Height with column down: 70 1/4" / 178.4 cm
- Minimum Working Height: 7 1/4" / 18.4 cm (legs flat on ground)
- Minimum Working Height:11 1/4" / 28.6 cm (legs in lowest locked position)
- Folded Length: 24 1/2" / 62.2 cm
- Maximum Load: 26 lbs 8 oz / 12 kg
- Weight: 5 lbs 7 1/2 oz / 2.48 kg
BALL HEAD SPECIFICATIONS
- Height 4 1/8" / 10.5 cm
- Weight: 1 lb 4 1/4 oz / .57 kg
- Uses Quick Release Plate #8104
TRIPOD LEG SPECIFICATIONS
- Maximum Working Height: 80 3/8" / 204.1 cm
- Maximum Height with column down: 66 1/8" / 167.9 cm
- Minimum Working Height: 3 1/8" / 8 cm (legs flat on ground)
- Minimum Working Height: 7 1/8" / 18.1 cm (legs in lowest locked position)
- Folded Length: 20 3/8" / 51.7 cm
- Weight: 4 lbs 3 1/4 oz / 1.91 kg
Item Includes
- SP532C Carbon Fiber Tripod Legs
- SPH45P Ball Head
- 8104 Quick Release Plate
- Tool kit with stoarge pouch
- 2 thread adapters (1/4"-20 to 3/8")
- Standard & low profile memory lock dials for ball head
ProMaster Specialist SPCH20 Cine Head
$ 89.95 - Sold Out
ProMaster Specialist SPCH20 Cine Head
ProMaster SKU: 2435 | Helix SKU: PR24352
Overview
The ProMaster SPCH20 Cine Head is a small but mighty head designed for use with mirrorless and DSLR cameras shooting video or still photos. It provides smooth tilt / pan movements and features a cushioned handle which can be reversed for right-hand or left-hand use. Its sliding quick release plate lets you balance your camera properly and has a scale for quick, repeatable use. The dovetail design of the quick release plate is compatible with a variety of other ProMaster accessories as well as many industry standard items. The mult-position quick release receiver at the top of the head can be set up in various orientations for front-to-back QR plate mounting or side-to-side. Red touch points quickly identify the controls of this head. A separate panning control knob helps you achieve smooth, even pans and a marked scale at the panning base shows precise movement.
Many telephoto lenses with dovetail style (arca-swiss compatible) tripod collars work extremely well with the SPCH20 head in achieving excellent, smooth tracking of animals for wildlife photography too.
Specifications
- Height: 3 15/16" / 10 cm
- Weight: 14 1/4 oz / 0.43 g
- Tilt Angle: +60 / -90
- Maximum Load: 6 lbs 9 oz / 3 kg
Item Includes
Includes:
- 1 ProMaster SPC20 cine head
- 1 1711 Quick release plate
ProMaster Speedlight Softbox - 7x9"
$ 29.95
ProMaster Speedlight Softbox - 7x9"
Mfr SKU: 37581 | Helix SKU: PR37581
Overview:
The PROMASTER SPEEDLIGHT SOFTBOX creates pleasing portraits by softening your speedlight's illumination. Its internal baffle can be adjusted for softer light. The special bounce feature works by directing a main light towards the ceiling (for a large, soft fill) while the open bounce panel directs some light forward to open shadows and make your subject stand out.
This softbox has a universal fit which works with most speedlights. It is fast and easy to set up. After use it folds flat and stores in an included pouch.
Specifications:
- Dimensions: 7 1/16" x 9 1/16" x 6 1/4" (180 mm x 230 mm x 159 mm)
- Weight: 3 1/8 oz / 89 g
ProMaster Step Down Ring - 46mm-37mm
$ 9.95
ProMaster Step Down Ring - 46mm-37mm
ProMaster SKU: 4921 | Helix SKU: PR4921
Overview
ProMaster Stepping Rings are the perfect addition to your collection of photographic gear. Use them with special effects filters and add on lenses to convert a lens with one thread diameter to a filter or conversion lens with another. ProMaster Stepping Rings are precision milled and designed to give you years of reliable service.
ProMaster Step Down Ring - 49mm-46mm
$ 9.95
ProMaster Step Down Ring - 49mm-46mm
ProMaster SKU: 4949 | Helix SKU: PR4949
Overview
ProMaster Stepping Rings are the perfect addition to your collection of photographic gear. Use them with special effects filters and add on lenses to convert a lens with one thread diameter to a filter or conversion lens with another. ProMaster Stepping Rings are precision milled and designed to give you years of reliable service.
ProMaster Step Down Ring - 52mm-46mm
$ 9.95
ProMaster Step Down Ring - 52mm-46mm
ProMaster SKU: 4970 | Helix SKU: PR4970
Overview
ProMaster Stepping Rings are the perfect addition to your collection of photographic gear. Use them with special effects filters and add on lenses to convert a lens with one thread diameter to a filter or conversion lens with another. ProMaster Stepping Rings are precision milled and designed to give you years of reliable service.
ProMaster Step Down Ring - 52mm-49mm
$ 9.95
ProMaster Step Down Ring - 52mm-49mm
ProMaster SKU: 4977 | Helix SKU: PR4977
Overview
ProMaster Stepping Rings are the perfect addition to your collection of photographic gear. Use them with special effects filters and add on lenses to convert a lens with one thread diameter to a filter or conversion lens with another. ProMaster Stepping Rings are precision milled and designed to give you years of reliable service.
ProMaster Step Down Ring - 55mm-46mm
$ 9.95
ProMaster Step Down Ring - 55mm-46mm
ProMaster SKU: 5005 | Helix SKU: PR5005
Overview
ProMaster Stepping Rings are the perfect addition to your collection of photographic gear. Use them with special effects filters and add on lenses to convert a lens with one thread diameter to a filter or conversion lens with another. ProMaster Stepping Rings are precision milled and designed to give you years of reliable service.
ProMaster Step Down Ring - 55mm-49mm
$ 9.95
ProMaster Step Down Ring - 55mm-49mm
ProMaster SKU: 5012 | Helix SKU: PR5012
Overview
ProMaster Stepping Rings are the perfect addition to your collection of photographic gear. Use them with special effects filters and add on lenses to convert a lens with one thread diameter to a filter or conversion lens with another. ProMaster Stepping Rings are precision milled and designed to give you years of reliable service.
