DJI Phantom 2 Propellers #9450 (1 Pair)
$ 15.00 - Sold Out
DJI Phantom 2 Propellers #9450 (1 Pair)
DJI Phantom 2 Quadcopter Battery
$ 129.00 - Sold Out
The DJI Phantom 2 Quadcopter Battery is a 5200 mAh, 11.1 V lithium-polymer battery designed for the Phantom 2 series. It is compatible with the Phantom 2, Phantom 2 Vision and Phantom 2 Vision+. It fits into the tail of the Phantom 2 and features four LEDs that display remaining battery capacity. Also it features its own power regulation, the Phantom 2 Quadcopter Battery is only suitable for use with the Phantom 2 Battery Charger.
Features:
Easy to Plug In and Take Out - New connectors make plugging in the battery and pulling it out super easy. No need to pull or connect any cables.Precise Battery Level Indication - On the original Phantom Quadcopter, battery levels used to be estimated by measuring voltage. As the motor spins, voltage drops making these estimates inaccurate. The DJI Intelligent Flight Battery monitors the total amount of energy consumed, so it can offer a precise battery level indication.Super Long Flight Time - The Phantom 2 Vision+ flew for 28 minutes covering around 10 miles. This has never been achieved before.Integrated Battery Level Checker - 4 bright LEDs built into the battery module display the battery level, can be viewed and monitored during close flying.
DJI Phantom 2 Quadcopter V2.0 Zenmuse H4-3D for GoPro Hero4
$ 999.00 - Sold Out
DJI Phantom 2 Quadcopter V2.0 Zenmuse H4-3D for GoPro Hero4
DJI Phantom 2 Spare Battery
$ 129.00 - Sold Out
DJI Phantom 2 Spare Battery
DJI Phantom 2 Vision+ Quadcopter with FPV HD Video Camera and 3-Axis Gimbal (...
$ 998.99 - Sold Out
DJI Phantom 2 Vision+ Quadcopter with FPV HD Video Camera and 3-Axis Gimbal
DJI Phantom 2+ V3.0 Quadcopter
$ 1,299.00 - Sold Out
DJI Phantom 2+ V3.0 Quadcopter
DJI PHANTOM 3 2312 MOTOR (CCW)
$ 29.00 - Sold Out
DJI PHANTOM 3 2312 MOTOR (CCW)
DJI PHANTOM 3 2312 MOTOR (CW)
$ 29.00 - Sold Out
DJI PHANTOM 3 2312 MOTOR (CW)
DJI PHANTOM 3 ANTENNA (4PC)
$ 20.00 - Sold Out
DJI PHANTOM 3 ANTENNA (4PC)
DJI PHANTOM 3 POWER PORT PART4
$ 10.00 - Sold Out
DJI PHANTOM 3 POWER PORT PART4
DJI Phantom 3 Spare Battery
$ 149.00 - Sold Out
DJI Phantom 3 Spare Battery
DJI Phantom 4 Advanced
$ 1,199.00 - Sold Out
DJI Phantom 4 Advanced
DJI SKU: 7104 | Helix SKU: DJ7104
Overview
What's In The Box
DJI Phantom 4 Advanced+
$ 1,499.00 - Sold Out
DJI Phantom 4 Advanced+
DJI SKU: 7097 | Helix SKU: DJ7097
Overview
What's In The Box
DJI Ronin-M Gimbal System
$ 1,399.00 - Sold Out
DJI Ronin-M Gimbal System
DJI Ronin-S Gimbal
$ 749.00 - Sold Out
DJI Ronin-S Gimbal
DJI SKU: CP.ZM.00000103.02 | Helix SKU: DJCPZM0000010302
Overview
With the Ronin-S, DJI just made it truly affordable to mount a DSLR or mirrorless video camera on an effective, versatile single-handed gimbal.
The Ronin-S is an ergonomically designed grip and gimbal with a payload big enough to do the work of independent filmmakers, commercial videographers, and newsroom camera operators, but it’s priced within reach of many advanced amateurs. The gimbal motors are strong enough to handle most DSLR and mirrorless cameras with interchangeable lenses, including zoom lenses and telephotos. It also supports the Manfrotto 501PL type quick-release system, making it compatible with many other tripod and fluid head systems.
The battery life is adequate for a full day—even a long, ambitious day—of shooting. And the Ronin-S itself can be mounted to a tripod, extension pole or radio-controlled buggy. It is compatible with DJI and third-party accessories.
DJI Ronin-S features:
- Handle: Non-slip ergonomic rubber grip; front-facing trigger, rear-facing mode button for speed and responsiveness, multidirectional joystick, side-mounted focus knob, direct camera control
- Weight: 4.1 lb., balanced weight distribution
- Payload: 8 lb. on gimbal
- Gimbal: 3-axis, motorized
- Battery: Internal to handle; 12-hour runtime
- Camera screen view: Unobstructed
- Programmable control: Downloadable Ronin-S app
- Second operator: Available with optional remote controller
- Connectors: 8-pin for optional external start/stop control; two 4-pin for optional external focus motor and onboard power; CAN bus for wireless receiver
- Compatible cameras: DSLR and mirrorless models from Canon, Hasselblad, Nikon, Panasonic, Sony
Stable Video
Shake-free video requires two things: a smooth, quality gimbal and a design that lets the camera operator move freely. The DJI Ronin-S has both.
The Ronin-S is equipped with a motorized 3-axis gimbal that stabilizes the camera for pitch, roll and yaw. It even stabilizes while recording quick action. The motors in the gimbal are whisper quiet. The rubberized Ronin-S handle is designed for a secure, steady, one-handed grip, letting the operator move with the action without losing control. The Ronin-S comes with a short tripod that, when closed, doubles as a handle extension for extra-secure two-handed grip, including in flashlight mode.
Because the Ronin-S is compact and balanced, it is easily passed through windows and doorways, over walls, and up or down stairs. It excels in follow work, hoists easily to function as a miniature boom, and works its way through crowds. Shooting inside a vehicle or from the interior? Both just got easier.
The SmoothTrack program further eliminates unwanted movement by enabling the gimbal to compensate for operator movements on the pan, tilt and roll axes. No second operator is needed to input those corrections remotely.
Mounting Versatility
The Ronin-S doesn’t have to be handheld. Mount it to a tripod, a car, an RC buggy, a dolly, a cable, a boom or a jib. When car-mounted, the gimbal motors can function at vehicle speeds up to 46 mph. (If you mount with a device equipped with suction cups, make sure you don’t go beyond the capabilities of the mount.) The Ronin-S also works with the Manfrotto 501PL type quick-release system, which means it will fit any number of available mounts, some of which you may already have.
For more flexible handheld use, a monopod can be attached to allow the camera operator to reach tight spaces with what becomes, essentially, an extended handle. The long monopod also promotes use as a boom or in place of a jib.
Building an Ecosystem with Accessory Mounts
A handheld gimbal works best with an ecosystem that provides a range of accessories, and the Ronin-S accepts many. Mount a microphone, lights and an external monitor. Mount a DJI Pro Wireless Receiver and connect wirelessly to DJI Master Wheels and DJI Force Pro for intuitive, precise camera and gimbal movements. Connect third-party remote controllers via the S-Bus port on the Ronin-S.
Creative Modes
Five programmable functions make it easy to achieve sophisticated video effects:
- Capture: Use the app to control the camera, record with the trigger or take a photo.
- Panorama: All you need to do is plug in your camera information and the span of your photo. The app does everything else.
- Timelapse: Set the shutter, aperture, ISO, exposure value, white balance, shutter interval, duration of the timelapse, and frame rate. The app tells you how long the video will take to record.
- Motionlapse: Set the same values as in Timelapse but program in motion and the tripod-mounted Ronin-S will move the camera automatically.
- Track: Similar to Motionlapse, Track lets you set as many as five waypoints in recording a video.
Multiple User Memory
No longer will multiple users have to redo settings after every single use by a colleague. Ronin-S remembers settings for up to three users. The settings also can be input to the Ronin-S memory for different conditions or scenes, then activated with the memory button.
Focus Wheel
The Ronin-S comes standard with a side-mounted focus wheel and a cable to connect the wheel and camera. DJI is working toward pull focus for more models and will make the capability available to more cameras and lenses in continual firmware updates. Here’s where to check compatibility and planned firmware updates.
An external motor also is available from DJI for improved pulled focus.
Compatible Cameras, Lenses
Just about every popular DSLR and mirrorless digital camera is compatible with the Ronin-S. That includes cameras from Canon, Hasselblad, Nikon, Panasonic and Sony. Firmware updates will continue to expand compatibility for camera models as DJI develops them. The Ronin-S ships with a camera riser for Sony models to make them compatible and with a support to steady long lenses.Sport Mode
To capture especially quick movements, the Ronin-S can be switched to Sport Mode. It’s done simply by pushing and holding the Mode (“M”) button while recording. The camera will change positions more quickly in Sport Mode. Sport mode ends when the button is released.
Auto Tune and Torque Control
Auto Tune is accessed from the handle and set up with the app. It allows the operator to adjust the torque of the gimbal motors to suit the scene. Three levels of gimbal motor aggressiveness are available.
Auto Tune also helps to maintain balance, depending on the weight of the camera. Those values can be set manually or set on automatic. When set to automatic, the gimbal motors self-adjust to camera weight. Torque will increase for heavier cameras and lenses, and decrease for lighter setups.
DJI Spark Fly More Combo - Alpine White
$ 699.00 - Sold Out
DJI Spark Fly More Combo - Alpine White
DJI SKU: 7566 | Helix SKU: DJ7566
Overview
Spark is a mini drone that features all of DJI's signature technologies, allowing you to seize the moment whenever you feel inspired.
Though agile in the air, drones can be bulky and cumbersome when on land. Not so with the Spark from DJI, which won't hold you back no matter what the adventure. This compact quadcopter features an integrated camera with motorized stabilization to capture 12MP photos, 1080p Full HD videos, and even aerial selfies. The drone's compact size, 31 mph top speed, and up to 16 minutes of flight time will appeal to a variety of users, from FPV enthusiasts to racers to those just looking for more dynamic shots than are possible with simply a smartphone or camcorder. The drone features GPS- and vision-based navigation for outdoor or indoor use, a variety of flight modes, and a 3D obstacle-detection system.
What's In The Box
Dot Line 43mm Snap Cap
$ 4.95
Dot Line 43mm Snap Cap
Dot Line SKU: DL-0043 | Helix SKU: DL0043
Overview
DLC Snap-On Lens Caps -- 43mm
Spring clips assure positive lock.
Light weight.
All black plastic.
Dot Line DLC Handlebar / Seat Post Pole Mount for GoPro Cameras
$ 11.95
Dot Line DLC Handlebar / Seat Post Pole Mount for GoPro Cameras
Dot Line SKU: DL-1206 | Helix SKU: DL1206
Overview
The DLC Handlebar/Seat post Pole Mount for Go Pro Cameras allows all the
current GoPro cameras on the market today to be mounted on to a
handlebar or seat post. The maximum post size is 1-5/8" (4cm). Included
is 1 short and 1 long extension arm as well as 1 short and 1 long
locking screw.
Dot Line DLC Roll Bar Mount for GoPro Cameras
$ 17.95
Dot Line DLC Roll Bar Mount for GoPro Cameras
Dot Line SKU: DL-1207 | Helix SKU: DL1207
Overview
The new DLC Roll Bar Mount for GoPro Cameras is designed for motorbikes. The clamp opens up to 2-1/2". It features friction pads to provide for a secure mount and has an open slot design on one side to enable easy mounting to the roll bar. Complete with thumb screw knob. Designed to accept all current GoPro Hero cameras on the market today.
Dot Line Flo Pod Video Stabilizer
$ 259.95
Dot Line Flo Pod Video Stabilizer
Dot Line SKU: RS-3124 | Helix SKU: DLRS3124
Overview
Dot Line Flo Pod Video Stabilizer by RPS Studio
Dot Line Hands Free Video Stabilizer
$ 159.95
Dot Line Hands Free Video Stabilizer
Dot Line SKU: DL-V9 | Helix SKU: DLV9
Overview
Body harness type equipment steady support for hands free operation.
The V9 is fully adjustable for any apparatus position. Excellent for video imaging, binoculars, long lens photography without the need for a monopod or tripod. Designed for mobility, the V9 comes with a camera tilt-head and quick release plate.
Hands Free Video Stabilizer by Dot Line
Specifications
Product Weight: 3lbs
Item Includes
- Carrying Case
Dot Line SV-50H II External Monitor for DSLR
$ 379.95
Dot Line SV-50H II External Monitor for DSLR
Dot Line SKU: CS-SWIVI | Helix SKU: DLCSSWIVI
Overview
The new Swivi SV-50H II is the world’s first external monitor featuring a 5 inch diagonal full frame 16:9 LCD screen with an integrated design that makes it possible to be attached via the Fast-load Plate to a HDSLR that has an HDMI port and Live-View function via the tripod socket.
This new design for the Swivi allows for easy connection and multi-angle shooting. The LCD screen swings out and up to 180° and tilts up to 270° allowing the photographer to view what is being filmed without having to be directly behind the camera or at eye level.
Additional features include:
- Peaking Mode to verify sharp focus
- Live Zoom In and Zoom Out functions
- HDMI In/Out allowing pass through to a second monitor (both can be viewed at the same time) as well as stereo speakers and a 3.5mm plug to accept external headphones.
- The Swivi accepts 1 or 2 Canon type LP-E6 batteries. Use of 2 batteries doubles the run time.
- Also included is a ball head adapter as the LCD screen can be unplugged from the base and mounted onto the top of the camera or a bracket.
- Complete with removable Sunshade Hood, 16” HDMI cable, battery, and charger.
Dot Line Tripod Adapter for Go Pro - DL-1200
$ 5.95
Dot Line Tripod Adapter for Go Pro - DL-1200
Dot Line SKU: DL-1200 | Helix SKU: DL1200
Overview
Adapts the GoPro® camera to fit on to a standard 1/4-20 post of a tripod or monopod.
DSLR Camera Protective Cover (DL-6399)
$ 44.99
DSLR Camera Protective Cover (DL-6399)
DSLR Sensor Cleaning Service Charge
$ 65.00
DSLR Sensor Cleaning Service Charge
Eiko 120V 1000W T-6 G9.5 Base (FEL)
$ 16.95
Eiko 120V 1000W T-6 G9.5 Base (FEL)
Eiko 120V 100W T-4 BA15d Base (ESR)
$ 10.95
Eiko 120V 100W T-4 BA15d Base (ESR)
Eiko 120V 150W Frosted T-4 DC Bayonet Base (ETF) (Q150DC-120V)
$ 2.95
Eiko 120V 150W Frosted T-4 DC Bayonet Base (ETF) (Q150DC-120V)
Eiko 120V 150W T-4 BA15d Base (ETC)
$ 8.95
Eiko 120V 150W T-4 BA15d Base (ETC)
Eiko 120V 150W T-4 DC Bayonet Base (ETC) (Q150CL/DC-120V)
$ 2.95
Eiko 120V 150W T-4 DC Bayonet Base (ETC) (Q150CL/DC-120V)
Eiko 120V 200W T-4 BA15d Base (FEV)
$ 13.95
Eiko 120V 200W T-4 BA15d Base (FEV)
Eiko 120V 250W Blue Inside Frosted A-21 E26 Base (BCA)
$ 4.95
Eiko 120V 250W Blue Inside Frosted A-21 E26 Base (BCA)
Eiko 120V 250W Inside Frosted A-23 E26 Base (ECA)
$ 3.95
Eiko 120V 250W Inside Frosted A-23 E26 Base (ECA)
Eiko 120V 250W T-4 BA15d Base (ESS)
$ 19.95
Eiko 120V 250W T-4 BA15d Base (ESS)
Eiko 120V 250W T-4 E11 Base (EHT)
$ 6.95
Eiko 120V 250W T-4 E11 Base (EHT)
Eiko 120V 500W Blue Inside Frosted PS-25 E26 Base (EBW)
$ 7.95
Eiko 120V 500W Blue Inside Frosted PS-25 E26 Base (EBW)
Eiko 120V 750W T-5 G9.5 Base (EHG)
$ 24.95
Eiko 120V 750W T-5 G9.5 Base (EHG)
Eiko 12V 20W 30 Deg. Flood MR11 GU4 Base FTD-FG
$ 5.95
Eiko 12V 20W 30 Deg. Flood MR11 GU4 Base FTD-FG
Eiko SKU: 15144 | Helix SKU: EIFTDFG
Overview
| Voltage Rating | 12 |
| Watts | 20 |
| Amps | 1.67 |
| Base Type | GU4 |
| Bulb Type | MR11 |
| Filament | C-8 |
| MOL in/mm | 1.56/39.5 |
| MOD in/mm | 1.41/35.8 |
| Approx Initial Max Beam CP | 600 |
| CT deg K | 2900 |
| Beam Angle | 30 |
| Beam Description | Flood |
| Rated Life | 2,000 |
| Common Code | Q20MR11/FL/CG |
| Burning Position | Any |
| Special Desc | Dichroic Reflector w/ Front Glass |
| Type Use | Display 30 |
Cross Reference
| HALCO |
MR11FTD/L
107104
|
| USHIO |
FTD/FG, JDR/M12V-20W/G/FL30/FG
1000622
|
Eiko 12V 20W 38 Deg. MR16 GU5.3 Base (BAB-FG)
$ 1.95 - Sold Out
Eiko 12V 20W 38 Deg. MR16 GU5.3 Base (BAB-FG)
Eiko 18W Quad-Tube 5000K G24q2 4 Pin Base Fluorescent Light Bulb QT18/50-4P
$ 3.28
Eiko 18W Quad-Tube 5000K G24q2 4 Pin Base Fluorescent Light Bulb QT18/50-4P
Eiko SKU: 49251 | Helix SKU: EIQT18504P
Overview
18W Quad-Tube 5000K G24q2 4 Pin Base Fluorescent
- Ordering Code:49251
- UPC Code: 031293492517
- UNSPSC: 39101619
Specifications
General |
|
| Watts | 18 |
| Base Type | G24q-2 |
| Bulb Type | T4 |
| MOL in/mm | 5.8/147 |
| Mercury Content (mg) | 2.2 |
| HG Form | solid |
| Approx Initial Lumens | 1150 |
| Approx Mean Lumens | 980 |
| CT deg K | 5000 |
| CRI | 82 |
| Rated Life | 10,000 |
| Approvals | IMERC, TCLP Compliant |
Cross Reference
| HALCO |
PL18D/E/50/ECO
109074
|
| TCP |
32418Q/50K
|
Eiko 3000K LED LiteSpan A19 Omni-Directional 300 Degree Beam, 9.8W - 800lm, Dimmable, 2BD, 80+CRI, (LED10WA19/300/830K-DIM-G4)
$ 11.95
Eiko 3000K LED LiteSpan A19 Omni-Directional 300 Degree Beam, 9.8W - 800lm, Dimmable, 2BD, 80+CRI, (LED10WA19/300/830K-DIM-G4)
Eiko 82V 300W MR13 GX5.3 Base (FHS)
$ 9.95
Eiko 82V 300W MR13 GX5.3 Base (FHS)
Eiko DISC - 32W Universal Start 55K hr 5000K 85 CRI T-8 Medium Bi-pin (F32T8/850K/XL)
$ 4.95
Eiko DISC - 32W Universal Start 55K hr 5000K 85 CRI T-8 Medium Bi-pin (F32T8/850K/XL)
Eiko LED Advantage A19 240 Degree Beam, 9W - 760lm, Dim 80CRI, 5000K, E26 120VAC (LED9WA19/240/850K-DIM-G6A)
$ 5.95
Eiko LED Advantage A19 240 Degree Beam, 9W - 760lm, Dim 80CRI, 5000K, E26 120VAC (LED9WA19/240/850K-DIM-G6A)
Eiko LED LiteSpan A19 Omni-Directional 300 Degree Beam, 11W - 1100lm, Dimmable, 2700K, E26 (LED11WA19/300/827K-DIM-G5)
$ 11.95
