Norman 5X 22" Studio reflector w/ deflector
$ 215.95
Norman 5X 22" Studio reflector w/ deflector
Norman SKU: 810740 | Helix SKU: NR810740
Overview
The 22 inch 5X Reflector has a deflector in front of the flashtube that bounces light into its flat white surface, to produce a light that is frequently compared to a softbox. This wrap-around light quality creates a unique blend of smooth, broad highlights with open shadows. Optimum results from this 130° reflector are achieved when used close to the subject.
Specifications
| Light Output (ISO 100 @ 10 feet) | |||||||||
| Watt-seconds | 100 | 200 | 400 | 800 | 1200 | 1600 | 2000 | 2400 | 4800 |
| 5X f/stop | 44 | 5.64 | 84 | 114 | 119 | 164 | 167 | 169 | 228 |
| 5X Guide Number | 46 | 66 | 92 | 130 | 155 | 184 | 202 | 214 | 300 |
Norman 7BR 7" background reflector for ML Series
$ 43.95
Norman 7BR 7" background reflector for ML Series
Norman 7BRS 7" background reflector w/ accent slot
$ 47.95
Norman 7BRS 7" background reflector w/ accent slot
Norman 7H 7" reflector for ML Series
$ 45.95
Norman 7H 7" reflector for ML Series
Norman B4126 Battery for P200B
$ 218.95
Norman B4126 Battery for P200B
Norman SKU: 811926 | Helix SKU: NR811926
Overview
The B4126 (811926) is a
replacement Super Battery for
discontinued P200B Power
Supply. Provides 130+ full power
flashes at 10-second intervals.
Norman B5122 Battery for B400B
$ 209.95
Norman B5122 Battery for B400B
Norman SKU: 812863 | Helix SKU: NR812863
*Special Order Item
Overview
The B5122 (812863) is a replacement Super Battery for the P400B Power Supply.
Provides 190+ full power flashes at 15 second intervals.
Norman BD410 Barndoor for 10" reflectors
$ 177.95 - Sold Out
Norman BD410 Barndoor for 10" reflectors
Norman BD422 Barn Door All 22in Reflector, BD422
$ 305.95 - Sold Out
Norman BD422 Barn Door All 22in Reflector, BD422
Norman BD45 Barndoor for all 5" reflectors
$ 96.95
Norman BD45 Barndoor for all 5" reflectors
Norman BDAL Barndoor for C1000 Allure
$ 63.95
Norman BDAL Barndoor for C1000 Allure
Norman BP320 DC power pack for DP320
$ 211.95
Norman BP320 DC power pack for DP320
Norman SKU: 811954 | Helix SKU: NR811954
Overview
Now your Allure DP320 Monolight can be used anywhere, with the BP320 (811954) Battery Power Supply. Even in the most remote locations you can have professional studio light that is compatible with the entire line of Norman light modifiers.
A fully charged battery will support approximately 115 full power flashes. The built-in level indicator shows battery power status, with a red light to tell you when it needs to be charged again. The optional R4162 Adapter allows the BP320 to be conveniently mounted to a light stand.
Specifications
|
Battery Type Battery Capacity Charge Requirement Battery Output Dimensions Weight |
Sealed lead acid 12 VDC, 2.3Ah 18VDC, 600MA 305VDC, 500MA 8.7" L, 4.3" W, 1.9" D 3 pounds |
Norman BRL 50 watt modeling lamp for battery portable series
$ 17.95
Norman BRL 50 watt modeling lamp for battery portable series
Norman CG10 10" square colored gels
$ 50.95
Norman CG10 10" square colored gels
Norman CG16 16" square colored gels
$ 138.95
Norman CG16 16" square colored gels
Norman CG5 5" square colored gels
$ 30.95
Norman CG5 5" square colored gels
Norman CRK-32 Collapsible 5-in-1 32" reflector
$ 53.95
Norman CRK-32 Collapsible 5-in-1 32" reflector
Norman CRK-42 Collapsible 5-in-1 42" reflector
$ 65.95
Norman CRK-42 Collapsible 5-in-1 42" reflector
Norman CRK-4272 Collapsible 5-in-1 42"x 72" reflector
$ 133.95
Norman CRK-4272 Collapsible 5-in-1 42"x 72" reflector
Norman SKU: 812027 | Helix SKU: NR812027
Overview
A reflector is commonly used to bounce existing light at a subject to serve as a fill light source. Reflectors with different surfaces will control contrast, add warmth and increase specular highlights
All Norman 5 in 1 Reflector Kits start with a white translucent panel that can be collapsed for storage with the reversible reflector in the convenient travel pouch. This panel works great for diffusing sunlight to create softer, lower contrast lighting outdoors
Each kit includes a reversible wrap that can be zipped around the diffusion panel. One combination has a bright white surface on one side with a warming gold on the other. This wrap can be reversed to expose the black and high contrast silver panels.
Norman D12 Power Pack 1200 watt second
$ 2,966.95 - Sold Out
Norman D12 Power Pack 1200 watt second
Norman SKU: 810815 | Helix SKU: NR810815
Overview
Commercial Photographers need lighting equipment that will provide the power, repeatability and versatility required to handle the endless variety of assignments they encounter on a daily basis. Norman Series 900 equipment has always been able to meet these challenges, and the D12 and D24 Digital Power Supplies are no exception.
These 1200 and 2400 watt-second systems incorporate four lamphead outlets with digital displays and individual on/off switching. Power levels are adjusted through two channels, each with a five-stop range that are adjustable in 1/10 stop increments. You can also combine the two channels to deliver full power to a single lamphead or to create a symmetrical power supply.
Compatible with all Series 900 Lampheads and related light modifiers
- Optional software for complete control from your PC
- Photo eye, 1/4" sync jack and optional PocketWizard™ Radio Receiver
- Accurate digital controls with LED display for each lamphead
- Easy to use rotary knobs control power settings and modeling light levels
- Selectable audible and visual flash verification
- Misfire alarm for each lamphead
- Flash repeatability of 1/20 stop at full power
- Slow charge option allows shooting at locations with sub-par wiring
- Full two year limited parts and labor warranty
- Independent safety approvals including ETL, CETL and FCC
Features from above picture #2
1- LED Display: Displays the power in watt-seconds that has been set for that lamphead.
2- Power Switch: Switches AC power on/off. Internal memory retains settings.
3- AC Power Inlet: 115 volt 60HZ power input, stabilized to provide repeatibility of 1/20 stop at full power with AC line voltage fluctuations between 105-125 volts.
4- Reset 15 Amp Circuit Breaker: Automatically protects the flash circuit against excessive overloads.
5- Sync Outlets: Two sync outlets available for triggering from multiple cameras or meters.
6- Computer Control Modular Jack: Used to connect the power pack to a PC via serial port when using Norman Power Supply Communication Software.
7- Lamphead Enable: Allows a lamphead to be turned off without unplugging it.
8- Modeling Lamp: Can be set to full, ratio or off. Trim control brightens or dims without losing ratio.
9- Flash Verification: Audible verification will beep twice when the unit has returned to full power. Visual verification will cycle the modeling on and off, and then return to its previous state.
10- Combine: When the pack is in combine mode, all of the power in the power pack is distributed evenly to all lampheads that are enabled.
11- Photo Eye: Can be switched on to permit remote triggering from another flash source.
12- Slow Charge: When enabled the units recycle time is increased, which is useful when shooting at a location that has sub-par wiring.
13- Power Trim Knobs: Adjusts the flash output from full to -5 f/stops in 1/10 stop increments
14- Test Button/Ready Light: Press button to manually flash unit. Switch will light when ready to be triggered.
15- Antenna: For built-in PocketWizard™ Radio Receiver.
Norman D12R Power Pack 1200 watt second w/Pocket Wizard
$ 3,154.95 - Sold Out
Norman D12R Power Pack 1200 watt second w/Pocket Wizard
Norman SKU: 810710 | Helix SKU: NR810710
Overview
Commercial Photographers need lighting equipment that will provide the power, repeatability and versatility required to handle the endless variety of assignments they encounter on a daily basis. Norman Series 900 equipment has always been able to meet these challenges, and the D12 and D24 Digital Power Supplies are no exception.
These 1200 and 2400 watt-second systems incorporate four lamphead outlets with digital displays and individual on/off switching. Power levels are adjusted through two channels, each with a five-stop range that are adjustable in 1/10 stop increments. You can also combine the two channels to deliver full power to a single lamphead or to create a symmetrical power supply.
Additional Features:
- Compatible with all Series 900 Lampheads and related light modifiers
- Optional software for complete control from your PC
- Photo eye, 1/4" sync jack and optional PocketWizard™ Radio Receiver
- Accurate digital controls with LED display for each lamphead
- Easy to use rotary knobs control power settings and modeling light levels
- Selectable audible and visual flash verification
- Misfire alarm for each lamphead
- Flash repeatability of 1/20 stop at full power
- Slow charge option allows shooting at locations with sub-par wiring
- Full two year limited parts and labor warranty
- Independent safety approvals including ETL, CETL and FCC
Norman Power Supplies are also available with built-in PocketWizard™ radio receivers. This unique feature allows these power supplies to be used in the studio or on location without the hassle of sync cords, and it eliminates the risk of inadvertent tripping of your lights from other strobes in the area. The built-in PocketWizard™ receiver can be set to operate from any channel selected on a compatible PocketWizard™ transmitter.
Having the PocketWizard™ receiver built into the D12R and D24R eliminates the need to carry and keep track of a seperate receiver module and compatible cable. Best of all, the built-in unit is powered directly from the power supply, eliminating the need for batteries.
Features from above picture #2
1- LED Display: Displays the power in watt-seconds that has been set for that lamphead.
2- Power Switch: Switches AC power on/off. Internal memory retains settings.
3- AC Power Inlet: 115 volt 60HZ power input, stabilized to provide repeatibility of 1/20 stop at full power with AC line voltage fluctuations between 105-125 volts.
4- Reset 15 Amp Circuit Breaker: Automatically protects the flash circuit against excessive overloads.
5- Sync Outlets: Two sync outlets available for triggering from multiple cameras or meters.
6- Computer Control Modular Jack: Used to connect the power pack to a PC via serial port when using Norman Power Supply Communication Software.
7- Lamphead Enable: Allows a lamphead to be turned off without unplugging it.
8- Modeling Lamp: Can be set to full, ratio or off. Trim control brightens or dims without losing ratio.
9- Flash Verification: Audible verification will beep twice when the unit has returned to full power. Visual verification will cycle the modeling on and off, and then return to its previous state.
10- Combine: When the pack is in combine mode, all of the power in the power pack is distributed evenly to all lampheads that are enabled.
11- Photo Eye: Can be switched on to permit remote triggering from another flash source.
12- Slow Charge: When enabled the units recycle time is increased, which is useful when shooting at a location that has sub-par wiring.
13- Power Trim Knobs: Adjusts the flash output from full to -5 f/stops in 1/10 stop increments
14- Test Button/Ready Light: Press button to manually flash unit. Switch will light when ready to be triggered.
15- Antenna: For built-in PocketWizard™ Radio Receiver.
Specifications
|
SPECIFICATIONS |
D12 / D12R |
| Power | 1200 watt-seconds |
| Power Control | Full to –5 f/stops |
| Recycle Time at Full Power | 2.0 seconds |
| Flash Duration | 1/1600 second (full) |
| Guide Number* | 220 @10’, ISO 100 |
| Sync Trigger | Photo eye, 1/4" sync jack |
| Optional Sync Trigger | Built-in PocketWizard™ |
| Sync Voltage | 6 VDC |
| Flashtube | Quartz |
| Modeling Lamp Control | Off, ratio, full and trim |
| Supply Voltage | 105-125 VAC, 60HZ |
| Consumption | 15A |
| Voltage Stabilization | +/- 1% |
| Overload Protection | 15A circuit breaker |
| Dimensions | 7.5" X 7.4" X 11.7" |
| Weight | 12.3 pounds |
Norman D24 Power Pack 2400 Watt Second
$ 3,486.95
Norman D24 Power Pack 2400 Watt Second
Norman SKU: 810602 | Helix SKU: NR810602
Special Order Item
Overview
Specifications
Item Includes
Norman D24R Power Pack 2400 watt second w/ PocketWizard
$ 3,667.95 - Sold Out
Norman D24R Power Pack 2400 watt second w/ PocketWizard
Norman SKU: 810818 | Helix SKU: NR810818
Overview
Commercial Photographers need lighting equipment that will provide the power, repeatability and versatility required to handle the endless variety of assignments they encounter on a daily basis. Norman Series 900 equipment has always been able to meet these challenges, and the D12 and D24 Digital Power Supplies are no exception.
These 1200 and 2400 watt-second systems incorporate four lamphead outlets with digital displays and individual on/off switching. Power levels are adjusted through two channels, each with a five-stop range that are adjustable in 1/10 stop increments. You can also combine the two channels to deliver full power to a single lamphead or to create a symmetrical power supply.
Additional Features:
- Compatible with all Series 900 Lampheads and related light modifiers
- Optional software for complete control from your PC
- Photo eye, 1/4" sync jack and optional PocketWizard™ Radio Receiver
- Accurate digital controls with LED display for each lamphead
- Easy to use rotary knobs control power settings and modeling light levels
- Selectable audible and visual flash verification
- Misfire alarm for each lamphead
- Flash repeatability of 1/20 stop at full power
- Slow charge option allows shooting at locations with sub-par wiring
- Full two year limited parts and labor warranty
- Independent safety approvals including ETL, CETL and FCC
Norman Power Supplies are also available with built-in PocketWizard™ radio receivers. This unique feature allows these power supplies to be used in the studio or on location without the hassle of sync cords, and it eliminates the risk of inadvertent tripping of your lights from other strobes in the area. The built-in PocketWizard™ receiver can be set to operate from any channel selected on a compatible PocketWizard™ transmitter.
Having the PocketWizard™ receiver built into the D12R and D24R eliminates the need to carry and keep track of a seperate receiver module and compatible cable. Best of all, the built-in unit is powered directly from the power supply, eliminating the need for batteries.
Features from above picture #2
1- LED Display: Displays the power in watt-seconds that has been set for that lamphead.
2- Power Switch: Switches AC power on/off. Internal memory retains settings.
3- AC Power Inlet: 115 volt 60HZ power input, stabilized to provide repeatibility of 1/20 stop at full power with AC line voltage fluctuations between 105-125 volts.
4- Reset 15 Amp Circuit Breaker: Automatically protects the flash circuit against excessive overloads.
5- Sync Outlets: Two sync outlets available for triggering from multiple cameras or meters.
6- Computer Control Modular Jack: Used to connect the power pack to a PC via serial port when using Norman Power Supply Communication Software.
7- Lamphead Enable: Allows a lamphead to be turned off without unplugging it.
8- Modeling Lamp: Can be set to full, ratio or off. Trim control brightens or dims without losing ratio.
9- Flash Verification: Audible verification will beep twice when the unit has returned to full power. Visual verification will cycle the modeling on and off, and then return to its previous state.
10- Combine: When the pack is in combine mode, all of the power in the power pack is distributed evenly to all lampheads that are enabled.
11- Photo Eye: Can be switched on to permit remote triggering from another flash source.
12- Slow Charge: When enabled the units recycle time is increased, which is useful when shooting at a location that has sub-par wiring.
13- Power Trim Knobs: Adjusts the flash output from full to -5 f/stops in 1/10 stop increments
14- Test Button/Ready Light: Press button to manually flash unit. Switch will light when ready to be triggered.
15- Antenna: For built-in PocketWizard™ Radio Receiver.
Specifications
|
*The guide number stated was determined by measuring the bare bulb at 10 feet using ISO 100.
See individual reflectors in this catalog for guide numbers using specific light modifiers at various power settings.
Norman DF45 Diffusion Pack 5in SQ, DF45
$ 27.95
Norman DF45 Diffusion Pack 5in SQ, DF45
Norman FF10 Filter frame for use w/ BD410, GH10, FFH10
$ 46.95
Norman FF10 Filter frame for use w/ BD410, GH10, FFH10
Norman FF5 Filter frame for use w/ BD45, G45, FFH5
$ 46.95
Norman FF5 Filter frame for use w/ BD45, G45, FFH5
Norman FFH10 Frame holder for all 10" reflectors
$ 55.95
Norman FFH10 Frame holder for all 10" reflectors
Norman FQ20 2000 Ws for TL2000 Tri-Lite and Fresnel Spots
$ 302.95
Norman FQ20 2000 Ws for TL2000 Tri-Lite and Fresnel Spots
Norman SKU: 828155 | Helix SKU: NR828155
*Special Order Item
Overview
FQ20 (828155) 2000 w-s for TL2000 Tri-Lite and FS10 Fresnel Spotlight
Norman FQ3 2500 Ws for LH2000 and LH2400
$ 226.95
Norman FQ3 2500 Ws for LH2000 and LH2400
Norman SKU: 828158 | Helix SKU: NR828158
Overview
FQ3 (828158) 2500 w-s for LH2000 and LH2400
Current Norman Flashtubes are UV coated, and produce a color temperature of approximately 5500 degrees Kelvin.
Norman FQ4 4000 WS for LH4000
$ 363.95
Norman FQ4 4000 WS for LH4000
Norman SKU: 828161 | Helix SKU: NR828161
Overview
FQ4 (828161) 5000 w-s for LH4000 Lamphead
Current Norman Flashtubes are UV coated, and produce a color temperature of approximately 5500 degrees Kelvin.
Norman FQ5 5000 Ws LH4000
$ 233.95
Norman FQ5 5000 Ws LH4000
Norman SKU: 812849 | Helix SKU: NR812849
Overview
FQ5 (812849) 2500 w-s for Illuminator, includes R4112 Reflector Ring
Current Norman Flashtubes are UV coated, and produce a color temperature of approximately 5500 degrees Kelvin.
Norman FQ8 600 Ws for ML600 and ML400
$ 139.95
Norman FQ8 600 Ws for ML600 and ML400
Norman SKU: 812066 | NR812066
Overview
FQ8 (812066) 600 w-s for ML600 and ML400 Monolight
Current Norman Flashtubes are UV coated, and produce a color temperature of approximately 5500 degrees Kelvin.
Norman FT120 250 Ws for LH2 and LH4
$ 55.95
Norman FT120 250 Ws for LH2 and LH4
Norman FT16 1200 Ws for LH500+
$ 145.95
Norman FT16 1200 Ws for LH500+
Norman SKU: 812073 | Helix SKU: NR812073
Overview
FT16 (812073) 1200 w-s for LH500+ Lamphead
Current Norman Flashtubes are UV coated, and produce a color temperature of approximately 5500 degrees Kelvin.
Norman FT400 400 Ws for LH52, LH54 & TL500 Tri-Lite
$ 67.95
Norman FT400 400 Ws for LH52, LH54 & TL500 Tri-Lite
Norman G22 Round grid for 22" reflector
$ 293.95
Norman G22 Round grid for 22" reflector
Norman G5-1/2-15 Round grid 5" diameter, 15�
$ 65.95
Norman G5-1/2-15 Round grid 5" diameter, 15�
Norman G5-1/2-30 Round grid 5" diameter, 30�
$ 58.95
Norman G5-1/2-30 Round grid 5" diameter, 30�
Norman G5-1/2-40 Round grid 5" diameter, 40�
$ 57.95
Norman G5-1/2-40 Round grid 5" diameter, 40�
Norman G7-1/2-30 Round grid 7" diameter, 30�
$ 131.95
Norman G7-1/2-30 Round grid 7" diameter, 30�
Norman GH10 Round grid holder for 10" reflectors
$ 86.95
Norman GH10 Round grid holder for 10" reflectors
Norman GH5 Round grid holder for all 5" reflectors
$ 71.95
Norman GH5 Round grid holder for all 5" reflectors
Norman GS5-1/2 Round grid set 5" diameter, one each 15�, 30�, 40�
$ 159.95
Norman GS5-1/2 Round grid set 5" diameter, one each 15�, 30�, 40�
Norman GS7-1/2 Round grid set 7" diameter, one each 15�, 30�, 40�
$ 397.95
Norman GS7-1/2 Round grid set 7" diameter, one each 15�, 30�, 40�
Norman HTSB24 Allure high-temp softbox 24" x 24" (requires BDAL speed ring)
$ 219.95
Norman HTSB24 Allure high-temp softbox 24" x 24" (requires BDAL speed ring)
Norman SKU: 812192 | Helix SKU: NR812192
Overview
Norman offers a line of patented pop-up softboxes that produce a large, soft light that works well in a variety of portrait and commercial applications. Fast, easy set-up and tear-down, and the convenient travel pouch even make these versatile softboxes a great choice for many location assignments.
All Norman Softboxes include a snap-in inner baffle that can be installed for soft even lighting, or left out to provide slightly higher contrast. The front diffusion panel attaches with Velcro™ for easy installation and removal. The highly reflective inner coating and all baffles are neutral for accurate reproduction.
Norman also offers an assortment of Speed Ring Adapters that allow these softboxes to be used with many popular electronic flash systems. No tools are required to attach these adapters to the built-in speed ring, which is included with each softbox. The adapters can be left on when used with the same brand lamphead or easily exchanged to work with different systems.
Norman IL2500 2500 watt second lamphead
$ 1,139.95
Norman IL2500 2500 watt second lamphead
Norman LH2400 2500 watt second lamphead
$ 458.95
Norman LH2400 2500 watt second lamphead
Norman SKU: 810623 | Helix SKU: NR810623
Overview
The LH2400 (810623) Lamphead has been a significant part of the Norman line-up for many years. It can be used with any series 900 Power Supply, including the current D12 and D24. This reliable head includes a flashtube rated at 2500 w-s, 150 watt modeling lamp, 20' cable and friction float stand adapter.
The LH2400B includes the R9124 (812521) Blower for use with light modifiers that restrict airflow, such as a softbox, grid, diffusion dome, filters and gels.
